CMM2306-AJ-0G00

CMM2306-AJ MIMIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

+17.5 dBm Output Power Low Current: 70 mA, Typ. 800-2700 MHz Operation Single +3V to +6V Supply Input and Output Matched to 50 , DC Blocked Low-Cost SOIC-8 Plastic Package

Applications

PCS Medium Power Amplifiers Medium Power WLANs Base Station Receivers 800-2700 MHz Broadband Driver Amplifier Page 1 of 5Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. CMM2306-AJDecember 2007 - Rev 29-Dec-07 The Mimix CMM2306-AJ is a premium performance, pin- for-pin compatible second source for the TriQuint® 9132 and the Mini-Circuits® VNA. Providing higher gain and lower noise figure than either of the existing standard amplifiers at 25% less drain current, the CMM2306-AJ is an excellent choice for power sensitive applications, while delivering more design margin than either of the existing alternatives. This device will drop into existing sockets and offers the same single sup- ply, broadband, 50 matched and DC blocked input and out- put features and performance, that the industry has come to expect, with much higher efficiency and lower current. Packaged in a low-cost surface mount SOIC-8 package, the CMM2306-AJ offers superior performance to existing alternatives at a competitive price. V d 1 GND 2 RF IN 3 GND 4

8 GND

7 GND

6 RF OUT

5 GND

Description

Recommended Operating Conditions stinUpyTretemaraPstinUpyTretemaraP Drain V oltage (+Vd ) 3.0 to 6.0 V olts Operating Temperature (PC Board) -40 to +70 °C

Electrical Characteristics

The following specifications are guaranteed at room temperature with drain voltage (+Vd ) = 5.0 V ±5% at 2.5 GHz. stinUxaMpyTniMnoitidnoCretemaraP Frequency Range 800 2700 MHz Small Signal Gain 18.5 20 dB Bd5.3 erugiF esioN mBd715.51 @ 1 dB Compression tuptuO rewoP Output 3rd Order Intercept 27 dBm Input Return Loss 8 dB Output Return Loss 10 dB DC Supply Current 70 80 mA Supply V oltage 35 6V TriQuint and Mini-Circuits are trademarks of their respective corporations. Drain Voltage (+Vd) Drain Current (Id) RF Input Power Power Dissipation Thermal Resistance Storage Temperature Operating Temperature Channel Temperature Soldering Temperature +7 V 150 mA 15 dBm 1.0 W 55 ºC/W -65 ºC to +150 ºC -40 ºC to +80 ºC 175 ºC 260 ºC for 5 Sec Absolute Maximum Ratings

Broadband Driver Amplifier Page 2 of 5 Pin # Name Description 1+ V d Drain voltage. Connect to positive supply. 2 GND Ground. 3 RF IN RF input (Internally DC blocked). 4 GND Ground. 5 GND Ground. 6 RF OUT RF output (Internally DC blocked). 7 GND Ground. 8 GND Ground. Vd 1 GND 2 RF IN 3 GND 4 Connection Diagram and Pin Description +5V RF IN 0.01µF RF OUT T est Circuit Diagram T ypical Performance The following typical performance parameters were tested in the test circuit shown at room temperature and with a drain voltage (+Vd) = 5 V, unless otherwise specified. Frequency (MHz) Gain vs Frequency vs Vd Gain (dB) 500 1000 1500 2000 2500 3000 Frequency (MHz) Gain vs Frequency vs Temperature @ 5V Gain (dB) -20°C 0°C +25°C +70°C 800 900 1500 1800 2000 25002400 Frequency (MHz) Power Output (P-1) vs Frequency vs Temperature @ 5V Power Output (P-1) (dBm)16 -20°C 0°C +25°C +70°C 800 900 1500 1800 2000 25002400 Frequency (MHz) Power Output (P-1) vs Frequency vs Vd @ 25 °C Power Output (P-1) (dBm)9 800 900 1500 1800 2000 25002400 Supply Voltage (Vd ) Gain vs Vd vs Temperature@ 1.8 GHz Gain (dB) 34 5 6 -20°C 0°C +25°C +70°C Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. CMM2306-AJDecember 2007 - Rev 29-Dec-07

Broadband Driver Amplifier Page 3 of 5 T ypical Performance Frequency (MHz) Noise Figure vs Frequency vs Vd @ 25 °C Noise Figure (dB) 2.25 2.50 2.75 3.00 3.25 3.50 800 900 1500 1800 2000 25002400 Frequency (MHz) Noise Figure vs Frequency vs Temperature @ 5V Noise Figure (dB) 2.25 2.50 2.75 3.00 3.25 3.50 800 900 1500 1800 2000 25002400 -20°C +25°C +70°C Frequency (MHz) OIP3 vs Frequency vs Temperature @ 5V OIP3 800 900 1500 1800 2000 25002400 -20°C 0°C +25°C +70°C Frequency (MHz) OIP3 vs Frequency vs Vd @ 25 °C OIP3 800 900 1500 1800 2000 25002400 Frequency (MHz) S22 vs Frequency vs Vd Output RL (S 22) -20 -16 -12 500 1000 1500 2000 2500 3000 Frequency (MHz) S11 vs Frequency vs Vd Input RL (S11) -20 -16 -12 500 1000 1500 2000 2500 3000 Power In (dBm) Power In vs Power Out & Efficiency Vd = 4.8 V & Frequency = 1.88 GHz Power Out (dBm) -20 -14 -8 -2 4 Efficiency (%)Efficiency Power Out Frequency (MHz) S12 vs Frequency vs Vd Reverse Gain (S 22) -65 -55 -45 -35 -25 -15 500 1000 1500 2000 2500 3000 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. CMM2306-AJDecember 2007 - Rev 29-Dec-07

Broadband Driver Amplifier Page 4 of 5 Physical Dimensions T est Configuration and Evaluation Mimix tests the CMM2306-AJ on an FR4 PC test board. FR4 was chosen for its low loss characteristics at fre - quencies up to 2.5 GHz. Plated through hole connections from the top of the board to the backside ground plane mini- mizes inductance in the ground connections. These through hole connections are as close as possible to each ground pin. For evaluation purposes Mimix offers a prototype evaluation board (PB-CMM2306-AJ) for the CMM2306-AJ. Please call the factory or a local representative for more information. Handling Precaution Microwave devices are sensitive to electrostatic dis - char ge. Proper precautions should be taken to avoid ESD damage. Adjacent Channel Power /4 DQPSK Modulation, V d = 4.8 V Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. CMM2306-AJ December 2007 - Rev 29-Dec-07

Broadband Driver Amplifier Page 5 of 5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. CMM2306-AJ

Ordering Information

The CMM2306-AJ is available in a surface mount SOIC-8 plastic package. Part Number for Ordering Package CMM2306-AJ-0G00 Matte Tin finished RoHS compliant SOIC-8 package in bulk quantity CMM2306-AJ-0G0T Matte Tin finished RoHS compliant SOIC-8 package in tape and reel PB-CMM2306-AJ-0000 Evaluation Board Handling and Assembly Information Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF , DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: December 2007 - Rev 29-Dec-07