XCB170

XCB170 CLARE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Description

Ordering Information

• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• Small 6 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available The XCB170 is a 1-Form-B relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switch- es and photovoltaic die use Clare’s patented OptoMOS ® architecture. A highly efficient GaAIAs infrared LED controls the optically coupled input. The device is available in small 6-pin dual in line package in standard through hole and surface mount lead bend.
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• BSI Certified to:
• BS EN 60950:1992 (BS7002:1992) Certificate #: 7344
• BS EN 41003:1993 Certificate #: 7344 + Control – Control Do Not Use Load Do Not Use Load AC/DC Configuration XCB170 Pinout + Control – Control Do Not Use + Load – Load DC Only Configuration XCB170 Pinout Switching Characteristics of Normally Closed (Form B) Devices CONTROL 10ms 10% 90% 90% TONTOFF

Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Voltage (Peak) - V L - - 350 V Load Current (Continuous) AC/DC Configuration - I L - - 100 mA DC Configuration - I L - - 180 mA Peak Load Current 10ms I LPK - - 350 mA On-Resistance AC/DC Configuration I L=120mA R ON -3 15 0 Ω DC Configuration I L=200mA R ON -1 01 5 Ω Off-State Leakage Current V L=35OV I LEAK -- 1µ A Switching Speeds Turn-On I F=5mA, VL=10V T ON -- 5 m s Turn-Off I F=5mA, VL=10V T OFF -- 5 m s Output Capacitance 50V; f=1MHz C OUT -2 5 - p F Capacitance Input to Output - - - 3 - pF Input Characteristics @ 25°C Input Control Current I L=120mA I F 5-5 0 m A Input Dropout Current - I F 0.4 0.7 - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Voltage - V R -- 5 V Reverse Input Current V R=5V I R - - 10 µA Input to Output Capacitance - C I/O -3 - p F Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Power Dissipation - - 800 2 mW Isolation Voltage Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C www.clare.com2 XCB170 Rev. 2.0 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the opera- tional sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extend- ed period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C)

Electrical Characteristics

www.clare.com 3Rev. 2.0 PERFORMANCE DATA* * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. XCB170 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC LED Forward Voltage Drop (V) Device Count (N) XCB170 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) On-Resistance (Ω) Device Count (N) XCB170 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Blocking Voltage (V) Device Count (N) XCB170 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) LED Current (mA) Device Count (N) XCB170 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC LED Current (mA) Device Count (N) XCB170 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) Turn-On (ms) Device Count (N) XCB170 Typical Blocking Voltage vs. Temperature Temperature (°C) Blocking Voltage (VRMS) -40 455 450 445 440 435 430 425 420 -20 0 20 40 60 80 100 XCB170 Typical Turn-Off vs. Temperature (Load Current = 100mADC) Temperature (°C) 5mA 10mA Turn-On (ms) -40 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 -20 0 20 40 60 80 100 120 XCB170 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) Turn-Off (ms) Device Count (N) XCB170 Typical Load Current vs. Temperature Temperature (°C) Load Current (mA) 160 140 120 100 -40 -20 0 20 40 60 80 120 100 10mA 5mA XCB170 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Temperature (°C) Leakage (µA) -40 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 60 80 100 XCB170 Typical Turn-On vs. Temperature (Load Current = 100mADC) Temperature (°C) Turn-Off (ms) -40 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 -20 0 20 40 60 80 100 120 IF= 5mA

www.clare.com4 XCB170 Rev. 2.0 PERFORMANCE DATA* * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. XCB170 Typical LED Forward Voltage Drop vs. Temperature Temperature (°C) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 50mA 10mA 5mA XCB170 Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) LED Forward Current (mA) Turn-On (ms) 0 5 1 01 52 02 53 03 54 04 5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 XCB170 Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) LED Forward Current (mA) Turn-Off (ms) 0 5 1 01 52 02 53 03 54 04 5 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 XCB170 Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mA) Temperature (°C) On-Resistance (Ω) -40 -20 0 20 40 60 80 100 120 XCB170 Typical IF for Switch Operation vs. Temperature (Load Current = 50mA) Temperature (°C) LED Current (mA) -40 6.0 5.0 4.0 3.0 2.0 1.0 -20 0 20 40 60 80 100 120 XCB170 Typical IF for Switch Dropout vs. Temperature (Load Current = 50mA) Temperature (°C) LED Current (mA) -40 6.0 5.0 4.0 3.0 2.0 1.0 -20 0 20 40 60 80 100 120 XCB170 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC Load Voltage (V) Load Current (mA) 120 100 -20 -40 -60 -80 -100 -120 -3-4 -2 -1 0 1 2 3 4 XCB170 Energy Rating Curve Time Load Current (A) 10µs 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1ms100µs 100ms 1s10ms 10s 100s

www.clare.com 5Rev. 2.0 Dimensions mm (inches) MECHANICAL DIMENSIONS PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) 1.499 ± .127 (.059 ± .005) PC Board Pattern (Top View) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) 6-.800 DIA. (6-.031 DIA.) 6Pin DIP Through Hole (Standard) 6Pin DIP Surface Mount (“S” Suffix)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup- port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-XCB170-R2.0 ©Copyright 2001, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/26/01 For additional information please visit our website at: www.clare.com