XBT-1313-UV LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Applications

Features:

  • UVC LED with emission wavelength between 280 nm and 286 nm
  • Ultra-compact form factor: 1.3 mm x 1.3 mm x 0.85 mm package
  • Wide viewing angle >120 deg
  • High reliability package with ESD protection
  • Standard SMD Process
  • RoHS and REACH compliant Table of Contents Optical and Electrical Mechanical Dimensions .... 7 Product Shipping & Labeling PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved XBT-1313-UV Surface Mount UVC LED XBT-1313-UV Product Datasheet

1145 Sonora Court Sunnyvale, CA 94086 USA

  • Water/ Air/ Surface Disinfection
  • Florescence analyzer
  • Food & Pharmaceutical Processing
  • Horticulture
  • Medical Spectroscopy

1145 Sonora Ct. • Sunnyvale, CA 94086 XBT-1313-UV Binning Structure XBT-1313 LEDs are tested for radiometric flux and chromaticity at a drive current of 20 mA, 40 ms single pulse and placed into one of the following radiometric flux (FF) and wavelength (WWW) bins Radiometric Flux Bins Wavelength Bins Note 1: Luminus maintains a +/- 6% tolerance on flux measurements and +/- 1 nm on wavelength measurements. Note 2: Individual bins are not orderable. Please refer to product ordering information on page 3 for a list of ordering part numbers. XBT-1313-UV Product Datasheet PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved Flux Bin (FF) Minimum Flux (mW) Maximum Flux (mW) AA 1 2 AB 2 3 AC 3 4 AD 4 5 AE 5 6 Wavelength Bin (WWW) Minimum Wavelength (nm) Maximum Wavelength (nm) 280 280 286

The table below lists ordering part numbers available for XBT-1313-UV LEDs. The part number includes a bin kit, a group of flux and wavelength bins described in page 2, that are shippable for a given ordering part number . Individual flux or wavelength bins are not orderable . Flux bin listed is minimum bin shipped - higher bins may be included at Luminus’ discretion. XBT-1313-UV Product Datasheet PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved Part Number Nomenclature Product Family Package Type Spectrum Package Configuration Bin kit XBT: UVC Surface Mount Package 1313 : 1.3 mm x 1.3 mm Ultraviolet A130 : 130 degree lens Flux and Wavelength bin kit code - See bin kit order codes table Wavelength Range Wavelength Bins Radiometric Flux Ordering Part Number Bin Kit Flux Code Min. Flux 280 280 AA 1 XBT-1313-UV-A130-AA280-00 AB 2 XBT-1313-UV-A130-AB280-00 Ordering Part Numbers

(Part #) Product Datasheet Note 1: Ratings are based on operation at a constant junction temperature of Tj = 25 ° C. Test condition is a single 40 ms pulse at 25 ° C. Note 2: Luminus XBT-1313 LEDs are designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime data is specified at typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to typical forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the current vs. junction temperature derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 3: Caution must be taken not to stare at the radiation emitted from these UV LEDs. Optical and Electrical Characteristics PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved Parameter Symbol Typical Unit Test Current If 20 mA Output Radiant Power Popt 2.6 mW Minimum Forward Voltage Vf-min 4.0 V Typical Forward Voltage Vf-typ 5.2 V Maximum Forward Voltage Vf-max 7.0 V FWHM Δλ 10 nm Viewing Angle 2θ1/2 150 ° Thermal Resistance (junction-solder point) Rth 30 °C/W Absolute Maximum Ratings Parameter Symbol Value Unit Forward Current If-max 40 mA Junction Temperature Tj 65 ° C

Optical & Electrical Characteristics

1145 Sonora Court, Sunnyvale, CA 94086 USA

Relative Power vs. Forward Current φ/φ(20 mA) , 40 ms pulse, Tj = 25°C Forward Voltage vs Forward Current PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (20 mA), 40 ms pulse, Tj = 25°C Peak Wavelength Shift vs. Junction Temperature λp= λp(Tj) - λp (25°C), 40 ms pulse, If =20 mA Forward Voltage Shift vs. Junction Temperature ΔVf = Vf(Tj) - Vf(25°C), 40 ms pulse, If = 20 mA XBT-1313-UV Product Datasheet

Note 1 : Typical spectrum at 20 mA drive current. Typical Spectrum PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved XBT-1313-UV Product Datasheet

PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved Recommended Solder Pad & Stencil Pattern Solder Pad 1.4mm x 0.6mm Stencil Pattern 1.0mm x 0.4mm

Profile Setting Pb-Free Profile Average Ramp-up Rate (Tsmax, Tp) 1 °C/sec Preheat Temperature Min (Tsmin) 100-150 °C Preheat Temperature Max (Tsmax) 180-200 °C Preheat Time (tsmin to tsmax) 60-120 sec Liquidus Temperature (TL) 217 °C Time Maintained Above TL (tL) 50-80 sec Peak / Classification Temperature (TP) 260 °C Time within 5°C of Actual Peak Temp (tP) Max 10 sec Ramp-Down Rate 2-3 °C /sec 25°C to Peak Temperature time 4 mins Luminus recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations. PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Ct. • Sunnyvale, CA 94086 XBT-1313-UV Product Datasheet PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved XBT-1313-UV Label Information Product Shipping & Labeling Information All XBT-1313 products are packaged and labeled with their respective bin as outlined in the tables on pages 2 & 3. Each reel will only contain one flux and one wavelength bin

  1. UV Light XBT-1313-UV LEDs are short wavelength, deep UV LEDs. During operation, the LED emits high intensity UVC radiation, which is harm- ful to skin and eyes. UV light is also hazardous to skin and may cause cancer. Avoid exposure to deep UV light when LED is operational. Precautions must be taken to avoid looking directly at the UV light without the use of UV light protective glasses. Do not look directly at the front or at the LED’s lens when LED is operational. 2. Static Electricity (ESD) While XBT 1313 LEDs have built-in protection,they are sensitive to ESD (Electrostatic Discharge). Static electricity and surge voltages seriously damage UV LEDs and can result in complete failure of the device. Precautions must be taken against ESD when handling or operating these devices. 3. Operating Conditions In order to ensure the correct functioning of these LEDs, compliance to maximum allowed specifications is important. UV LEDs are par- ticularly sensitive to drive currents that exceed the max operating specifications and may be damaged by such drive curents. The use of current regulated drive circuits is strongly recommended when operating these devices. Customers should also provide adequate thermal management to ensure LEDs do not exceed maximum recommended temperatures. Operating LEDs at temperatures in ex- cess of specification will result in damage and possibly complete failure of the device. Precautions for storage, handling and use of UV LED components PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved

01 6/20/2019 Initial Release 02 11/04/2019 Tape and Reel drawing PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved The products, their specifications and other information appearing in this document are subject to change by Luminus Devices with- out notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be consid- ered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information.