XBDROY-00-0000-000000J01

XBDAWT-00-0000-000000E51 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. CLD-DS45 Rev 8A cree Xlamp XB-d leds Product descriPtioN The XLamp XB-D LeD brings next- generation performance, price and size to all LeD lighting applications. The XB-D’s footprint enables smaller designs with densely packed arrays for better light mixing and concentration. XB-D shares common footprint and uniform package design across all white and color configurations, simplifying board and optical designs for many LeD systems. XB-D is optimized to dramatically lower system cost in any illumination application, from indoor and outdoor lighting to architectural and transportation lighting.

features

• Cree’s smallest lighting class LeD: 2.45 X 2.45 mm
• XB-D white binned @ 85 °C; XB-D color binned @ 25 °C
• Up to 136 lm/W in cool white (@ 85 °C, 350 mA)
• Available in white, 80-minimum CRI white, and 70-minimum CRI cool white, royal blue, blue, green, amber, red-orange & red
• 1 A maximum drive current
• Wide viewing angle: from 115° (white) to 140° (red)
• Reflow solderable - JEDEC J-STD-020C compatible
• Unlimited floor life at ≤ 30 °C/85% RH
• electrically neutral thermal path
• RoHS- and REACh-compliant
• UL-recognized component (e349212) WWW.CRee.Com/XLAmp Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 taBle of coNteNts Relative Spectral power Relative Flux vs. Junction Relative Chromaticity vs. Relative Chromaticity vs. Reflow Soldering Characteristics 13

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs characteristics characteristics unit minimum typical maximum Thermal resistance, junction to solder point - white, royal blue, blue °C/W 6.5 Thermal resistance, junction to solder point - green °C/W 11 Thermal resistance, junction to solder point - amber °C/W 7 Thermal resistance, junction to solder point - red-orange, red °C/W 5 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue, blue, green degrees 135 Viewing angle (FWHM) - amber, red-orange, red degrees 140 Temperature coefficient of voltage - white mv/°C -2.5 Temperature coefficient of voltage - royal blue, blue, green mv/°C -3.3 Temperature coefficient of voltage - amber, red-orange, red mv/°C -2 ESD classification (HBM per Mil-Std-883D) Class 2 DC forward current mA 1000 Reverse voltage v -5 Forward voltage (@ 350 mA, 85 °C) - white v 2.9 3.5 Forward voltage (@ 350 mA, 25 °C) - royal blue, blue v 3.1 3.7 Forward voltage (@ 350 mA, 25 °C) - green v 3.3 3.9 Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red v 2.25 2.6 LeD junction temperature °C 150

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs fluX characteristics - White (tJ = 85 °c) The following table provides several base order codes for XLamp XB-D LeDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XB-D Binning and Labeling document. color cct range Base order codes min. luminous flux @ 350 ma calculated minimum luminous flux (lm)** order code min. max. Group flux (lm) @ 85 °c flux (lm) @ 25 °c* 700 ma 1000 ma Cool White 5000 K 8300 K R3 122 139 210 271 XBDAWT-00-0000-000000F51 R2 114 130 196 253 XBDAWT-00-0000-000000e51

70 CRI minimum

R3 122 139 210 271 XBDAWT-00-0000-00000BF51 R2 114 130 196 253 XBDAWT-00-0000-00000Be51 Neutral White 3700 K 5000 K R2 114 130 196 253 XBDAWT-00-0000-00000Lee4 Q5 107 122 184 237 XBDAWT-00-0000-00000LDe4 Q4 100 114 172 222 XBDAWT-00-0000-00000LCe4

80 CRI minimum

Q4 100 114 172 222 XBDAWT-00-0000-00000HCE7 Q3 93.9 107 162 208 XBDAWT-00-0000-00000HBE7 Q2 87.4 100 150 194 XBDAWT-00-0000-00000HAE7 Warm White 2600 K 3700 K Q4 100 114 172 222 XBDAWT-00-0000-00000LCe7 Q3 93.9 107 162 208 XBDAWT-00-0000-00000LBe7 Q2 87.4 100 150 194 XBDAWT-00-0000-00000LAe7 Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements , ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Neutral White, 3700 K - 5000K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• minimum CRI for 70 CRI minimum Cool White is 70.
• minimum CRI for 80 CRI minimum White is 80. * Flux values @ 25 °C are calculated and are for reference only. ** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs fluX characteristics - color (tJ = 25 °c) The following table provides several base order codes for XLamp XB-D LeDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XB-D Binning and Labeling document. color dominant Wavelength range Base order codes min. radiant flux (mW) @ 350 ma order codemin. max. Group dWl (nm) Group dWl (nm) Group flux (mW) Royal Blue D36 450 D57 465 34 (N) 550 XBDRoY-00-0000-000000N01 33 (m) 525 XBDRoY-00-0000-000000m01 32 (L) 500 XBDRoY-00-0000-000000L01 31 (K) 475 XBDRoY-00-0000-000000K01 30 (J) 450 XBDROY-00-0000-000000J01 color dominant Wavelength range Base order codes min. luminous flux (lm) @ 350 ma order codemin. max. Group dWl (nm) Group dWl (nm) Group flux (lm) Blue B3 465 B6 485 m2 39.8 XBDBLU-00-0000-000000201 K3 35.2 XBDBLU-00-0000-000000Z01 K2 30.6 XBDBLU-00-0000-000000Y01 color dominant Wavelength range Base order codes min. luminous flux (lm) @ 350 ma order codemin. max. Group dWl (nm) Group dWl (nm) Group flux (lm) Green G2 520 G4 535 Q5 107 XBDGRN-00-0000-000000D01 Q4 100 XBDGRN-00-0000-000000C01 Q3 93.9 XBDGRN-00-0000-000000B01 Q2 87.4 XBDGRN-00-0000-000000A01 color dominant Wavelength range Base order codes min. luminous flux (lm) @ 350 ma order codemin. max. Group dWl (nm) Group dWl (nm) Group flux (lm) Amber A2 585 A3 595 p3 73.9 XBDAmB-00-0000-000000801 p2 67.2 XBDAmB-00-0000-000000701 N4 62 XBDAmB-00-0000-000000601 N3 56.8 XBDAmB-00-0000-000000501

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs color dominant Wavelength range Base order codes min. luminous flux (lm) @ 350 ma order codemin. max. Group dWl (nm) Group dWl (nm) Group flux (lm) Red- orange o3 610 o4 620 Q4 100 XBDRDo-00-0000-000000C01 Q3 93.9 XBDRDo-00-0000-000000B01 Q2 87.4 XBDRDo-00-0000-000000A01 p4 80.6 XBDRDo-00-0000-000000901 p3 73.9 XBDRDo-00-0000-000000801 color dominant Wavelength range Base order codes min. luminous flux (lm) @ 350 ma order codemin. max. Group dWl (nm) Group dWl (nm) Group flux (lm) Red R2 620 R3 630 p2 67.2 XBDReD-00-0000-000000701 N4 62 XBDReD-00-0000-000000601 N3 56.8 XBDReD-00-0000-000000501 Note: Cree maintains a tolerance of +/- 7% on flux and power measurements. fluX characteristics - color (tJ = 25 °c) - coNtiNued

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs relative sPectral PoWer distriButioN Relative Spectral Power 100 380 430 480 530 580 630 680 730 780 Relative Radiant Power (%) Wavelength (nm) 5000K - 10000K CCT 3700K - 5000K CCT 2600K - 3700K CCT 100 380 430 480 530 580 630 680 730 780 Relative Radiant Power (%) Wavelength (nm) Royal Blue Blue Green Amber Red-Orange Red

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs relative fluX vs. JuNctioN temPerature (if = 350 ma) Relative Flux Output vs. Junction Temperature 100 120 25 50 75 100 125 150 Relative Luminous Flux (%) Junction Temperature (ºC) White Blue Green Amber Red-Orange, Red Relative Flux Output vs. Junction Temperature royal blue 100 120 25 50 75 100 125 150 Relative Radiant Flux (%) Junction Temperature (ºC) Royal Blue

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs electrical characteristics (tJ = 85 °c) electrical characteristics (tJ = 25 °c) 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Forward Voltage (V) White Electrical Characteristics (Tj = 25ºC) 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Forward Voltage (V) Royal Blue, Blue Green Amber, Red-Orange, Red

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs thermal desiGN The maximum forward current is determined by the thermal resistance between the LeD junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. white 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Thermal royal blue, blue 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W White royal Blue, Blue green 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W amber 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W amberGreen red-orange, red 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W red-orange, red

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs relative fluX vs. curreNt (tJ = 85 °c) relative fluX vs. curreNt (tJ = 25 °c) 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 1000 Relative Luminous Flux (%) Forward Current (mA) White Relative Intensity vs. Current (Tj = 25ºC) 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 1000 Relative Luminous Flux (%) Forward Current (mA) Blue Green Amber Red-Orange, Red

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs relative fluX vs. curreNt (tJ = 25 °c) - coNtiNued relative chromaticity vs. curreNt (Warm White) Relative Intensity vs. Current (Tj = 25ºC) royal blue 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 1000 Relative Radiant Flux (%) Forward Current (mA) Royal Blue Relative Chromaticity Vs. Current, WW -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 100 200 300 400 500 600 700 800 900 1000 Current (mA) ΔCCx ΔCCy T J = 85 °C

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs relative chromaticity vs. temPerature (Warm White) tyPical sPatial distriButioN Relative Chromaticity Vs. Temperature WW -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy I F = 350 mA Typical Spatial Radiation Pattern 100 -100 -80 -60 -40 -20 0 20 40 60 80 100 Relative Luminous Intensity (%) Angle (°) White Royal Blue, Blue, Green Amber, Red-Orange, Red

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs13 refloW solderiNG characteristics In testing, Cree has found XLamp XB-D LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature lead-Based solder lead-free solder Average Ramp-Up Rate (Tsmax to Tp) 3 °C/second max. 3 °C/second max. preheat: Temperature min (Tsmin) 100 °C 150 °C preheat: Temperature max (Tsmax) 150 °C 200 °C preheat: Time (tsmin to tsmax) 60-120 seconds 60-180 seconds Time maintained Above: Temperature (TL) 183 °C 217 °C Time maintained Above: Time (tL) 60-150 seconds 60-150 seconds Peak/Classification Temperature (Tp) 215 °C 260 °C Time Within 5 °C of Actual peak Temperature (tp) 10-30 seconds 20-40 seconds Ramp-Down Rate 6 °C/second max. 6 °C/second max. Time 25 °C to peak Temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. TP TL Temperature Time t 25˚C to Peak Preheat ts tS tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs14 Notes Lumen maintenance projections Cree now uses standardized IeS Lm-80-08 and Tm-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/Lm80_results. please read the XLamp Long-Term Lumen maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on Cree’s lumen maintenance testing and forecasting. please read the XLamp Thermal management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LeD junction temperature. moisture Sensitivity In testing, Cree has found XLamp XB-D LEDs to have unlimited floor life in conditions ≤30 ºC/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LeDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LeDs to the resealable moisture-barrier bag and closing the bag immediately after use. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eU Directive 2011/65/EC (RoHS2), as amended through June 8, 2011. RoHS Declarations for this product can be obtain from your Cree representative or obtained from the product ecology section of www.cree.com. ReACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notices of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. Historical REACh banned substance information (substances restricted or banned in the EU prior to 2010) is also available upon request. UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. vision Advisory Claim WARNING: Do not look at exposed lamp in operation. eye injury can result. See the LeD eye Safety application note at www.cree.com/xlamp_app_notes/led_eye_safety.

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs15 mechaNical dimeNsioNs All measurements are ±.13 mm unless otherwise indicated. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 2.45 2.45 0.65 0.76 1.84 0.355 2.285 0.923 0.462 0.817 1.633 R1.086 0.82 0.36 0.46 2.340.36 0.28 0.36 0.92 2.34 2.272 1.136 2.272 0.284 0.284 0.426 0.852 0.426 0.284 1/130.000 A2500-00125

2525 SBC HEW OUTLINE

---- 09/19/11D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 2.45 2.45 0.65 0.76 1.84 0.355 2.285 0.923 0.462 0.817 1.633 R1.086 0.82 0.36 0.46 2.340.36 0.28 0.36 0.92 2.34 2.272 1.136 2.272 0.284 0.284 0.426 0.852 0.426 0.284 1/130.000 A2500-00125 ---- 09/19/11D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ANoDe ANoDe top view side view Bottom view* recommended PcB solder Pad recommended stencil Pattern * Note: In December, 2012, Cree changed the thermal pad of the XB-D package to include the anode notch illustrated above. XB-D LeDs produced prior to implementation of this change may have a different visual appearance.

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs16 taPe aNd reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 BB 8.00 ±.10 4.00 ±.10 2.00 ±.10 +.10/-.001.50 ± .101.00 .30 ± .10

12.00 Nominal

12.30 Max

5.50 ±.10 1.75 ±.10 10.25 ±.10 2.60+/-0.1mm 2.05 +/-0.1 2.60 +/-0.1 REVISONS REV DESCRIPTION BY DATE APP'D A Released DC 10/23/11 JL B ADDED CATHODE AND ANODE NOTE DC 2/26/12 C CHANGED POCKET DIMS AND TOLERANCES DC 8/3/12 1/14.000 C2402-00020 Carrier Tape, 2525 HEW 10/23/11D. CRONIN Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm REFERENCE VENDOR PART NUMBER 020246 CATHODE SIDE ANODE SIDE B-BSECTION Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) STARTEND Cathode Side Anode Side (denoted by + and circle) 160.0 A A B 2.5±.1 SECTION A-A SCALE 2 : 1 1.5±.1 8.0±.1 4.0±.1 1.75±.10 12.0 .0 +.3 DETAIL B SCALE 2 : 1 13mm Cover Tape Pocket Tape User Feed Direction User Feed Direction

Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. xlamp xB-D leDs17 PackaGiNG Patent Label (on bottom of box) Label with Cree Bin Code, Qty, Reel ID Label with Cree Bin Code, Qty, Reel ID Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Unpackaged Reel Packaged Reel Boxed Reel CREE Bin Code & Barcode Label Vacuum-Sealed Moisture Barrier Bag Label with Customer P/N, Qty, Lot #, PO # Label with Cree Bin Code, Qty, Lot # Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Patent Label Label with Customer Order Code, Qty, Reel ID, PO #