X103SFB SENSORTECHNICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

8 mm switching soleniod valves 1/4October 2008 / 250 www.sensortechnics.com

FEATURES

  • 3-way, 2 position valve (NO, NC & Distributor)
  • Compact size, only 8 mm in width
  • Meets pressure requirements including 6, 30 & 100 psi
  • Excellent leakage specification for over 25 million cycles
  • Ensures high reliability with its single piece body design
  • Barbed pressure ports allow for direct tubing or manifold assemblies
  • Non-elastomeric versions with enhanced media compatibility available on request PHYSICAL PROPERTIES Operating environment X5... 15 to 50 °C all other 0 to 50 °C Storage temperature -40 to 70 °C Length 24 mm (0.92 in) Width 7.9 mm (0.31 in) Height 9.5 mm (0.375 in) Spacing 8 mm (centerline) Porting Universal barbs for 1/16 in I.D. tubing (1/32 in wall max.); manifold mount with X-seal Weight 4.5 g (0.16 oz) Internal volume 0.074 cm 3 (0.0045 in3) MEDIA COMPATIBILITY Non-reactive gases and selected liquids ELECTRICAL Power X1... (6 psi) 0.5 W all other (30 psi, 100 psi) 1.0 W Voltage 3, 5, 12, 24 V DC Electrical connections PC pins, 4 mm centers X-Valve is a registered trademark of Parker Hannifin Corporation. WETTED MATERIALS PBT (polybutylene terephthalate); 430 series stainless steel; 302 series stainless steel (passivated); FKM (fluoroelastomer); EPDM (ethylene propylene diene monomer); silicone

8 mm switching soleniod valves 2/4October 2008 / 250 www.sensortechnics.com .ontraPe russerPw olfmuminiM /sezisecifirO CtnelaviuqE V 1 etarkaeL 2 esnopseR C810.0 V ≤ ,)MDPE,MKF(mccs61.0 ≤ )enocilis(mccs610.0 sm02< C010.0 V ≤ mccs61.0 C500.0 V ≤ mccs2.0 PERFORMANCE CHARACTERISTICS FLOW CURVES (typical air flow)3 Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow dynamics design. The equivalent european measure is the kV value expressed in m /h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm.

8 mm switching soleniod valves 3/4October 2008 / 250 www.sensortechnics.com 0.375 (9.5) 0.640 (16.3) 0.916 (23.3) 0.155 (3.9) 0.310 (7.9) 0.28 (7.1) Short pin 0.157 (4.0) 0.100 (2.5) 0.41 (10.3) Long pin Normally open port 3 x barb fitting for 1/16" I.D. thin wall polyurethane tubing Normally closed port Common port to receptacle center line 0.150 (3.8) receptacle contacts for 0.025 (0.6) SQ. terminal posts OUTLINE DRAWING Side view Bottom view dimensions in inches (mm) Manifold mount diagram 0.315 (8.0) 0.315 (8.0) 0.642 (16.3) 0.157 (4.0) 0.6746 (17.13) 0.5345 (13.58) 0.030 (0.8) Ø 0.090 x "Depth" Ø 0.112/0.115 x 0.100 90° to Ø 0.132±0.003 (Ø 2.3 x "Depth" Ø 2.8/2.9 x 2.5 90° to Ø 3.4±0.08) dimensions in inches (mm) dimensions in inches (mm)

8 mm switching soleniod valves 4/4October 2008 / 250 www.sensortechnics.com

ORDERING INFORMATION

.onledoM egatloV lacitcelE noitcennoc remotsalE lanoitpO *seirosseccaerusserP ecifirO lioC egattaw epyT snoitpOX 1 isp6" 540.0 )mm341.1( W5.0l asrevinu *30 V3 CD )ylnoisp03&6( S niptrohs F MKF B teksag&wercs 2 isp03" 030.0 )mm267.0( W1l asrevinu 50 V5 CD )ylnoisp6( L nipgnol E MDPE )ylnoisp6( 0 seirosseccaon 5 isp001" 020.0 )mm015.0( W1C N 21 V21 CD S enocilis )ylnoisp6(

42 V42 CD

tondleifyrossecca* evlavnodetnirp elpmaS :onredro X 1 50 L F B Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Note: Not all combinations might be available. Non-elastomeric versions with enhanced media compatibility are available on request. Please contact your nearest Sensortechnics sales representative for further information. Accessories (please order separately using the following order numbers) .oNredrO noitpircseD 842170KZ ,gnibutenahteruyloptnerapsnartraelC )mm2.3(hcni8/1:retemaidretuo,)mm6.1(hcni61/1retemaidrenni PILCGNINIATER-X gnitnuomrofpilcredloS GULPTROP-X gulptroP -XR OTCENNOC rotcennochtiwsdael"21