X410 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2001 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS The Connor Winfield X410 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a +/-50ppm overall stability. Operating at 2.5V supply voltage, the X410 provides LVPECL Differential Outputs. 1 2 X410 - 400.0M LVPECL CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
2.5V OPERATION DIFFERENTIAL LVPECL OUTPUTS LOW JITTER <1pS RMS FREQUENCY CALIBRATION @ 25°C: ±20ppm TOTAL FREQUENCY TOLERANCE: ±50ppm TEMPERATURE RANGE: 0 to 70°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE 2.5V SURFACE MOUNT 5.0 x 7.5mm LVPECL CLOCK OSCILLATOR X410 Ec222 03 06/01/07 X410 0702 400MHZ ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -40 - 85 °C Supply Voltage (Vcc) -0.5 - 7.0 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 250 - 400 MHz Frequency Calibration @ 25°C -20 20 ppm Total Frequency Tolerance -50 50 ppm 1 Operating Temperature Range 0 - 70 °C Supply Voltage (Vcc) 2.375 2.500 2.625 Vdc Supply Current (Icc) - 60 90 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS SSB Phase Noise at 10Hz offset - -45 - dBc/Hz SSB Phase Noise at 100Hz offset - -85 - dBc/Hz SSB Phase Noise at 1KHz offset - -115 - dBc/Hz SSB Phase Noise at 10KHz offset - -135 - dBc/Hz SSB Phase Noise at 100KHz offset - -140 - dBc/Hz LVPECL OUTPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - - 50 Ohms 2 Voltage (High) (Voh) 1.475 - - Vdc (Low) (Vol) - - 0.880 Vdc Duty Cycle 45 50 55 % 3 Rise / Fall Time 20% to 80% - 0.5 1 nS PROCESS RECOMMENDATIONS Soldering Process See Solder Profile page 2. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 3) Duty Cycle measured at 50% of output swing. PACKAGE CHARACTERISTICS TABLE 4.0 Package Hermetically sealed ceramic package and metal cover.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2001 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS 2 2Ec222 03 06/01/07 Output Waveform X410 0702 400MHZ 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Solder Profile Suggested Pad Layout Test Circuit Package Outline and Dimensions Dimensional Tolerance: ±.005 (.127mm) Pin Connections TABLE 5.0 Pin Connection
1 N/C
2 N/C
3 Ground
4 Q Output
5 Q Output
6 Vcc
62.5 Ohm 250 Ohm 62.5 Ohm 330 pF 0.01 uF Vcc1 and Vcc2 = 2.5 Vdc High Impedance Probe High Impedance Probe Q Q 50% 20% 80% tr Duty Cycle 45 / 55 45 / 55 tf