X403 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT DA T A SHEET Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2001 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS The Connor Winfield X403 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a +/-20ppm 0 to 70°C overall stability, LVPECL Differential Outputs and Tri- state Enable / Disable function. The X403 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. 1 2 X403 - 622.08M LVPECL CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
3.3V OPERATION DIFFERENTIAL LVPECL OUTPUTS LOW JITTER <2pS RMS TOTAL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: 0 to 70°C ENABLE / DISABLE FUNCTION SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE 3.3V SURFACE MOUNT 5.0 x 7.5mm LVPECL CLOCK OSCILLATOR X403 Ec221 01 03/02/07 X403M2 622.08 TABLE 6.0 Enable / Disable Function (Pad 1) Output High or Open Enable Low Disable (High Impedance) Enable / Disable Function ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 7.0 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.5 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 250 - 700 MHz Total Frequency Tolerance -20 20 ppm 1 Operating Temperature Range 0 - 70 °C Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) - 60 100 mA Jitter (BW=10Hz to 20MHz) - - 10 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS SSB Phase Noise at 10Hz offset - -75 - dBc/Hz SSB Phase Noise at 100Hz offset - -95 - dBc/Hz SSB Phase Noise at 1KHz offset - -110 - dBc/Hz SSB Phase Noise at 10KHz offset - -125 - dBc/Hz SSB Phase Noise at 100KHz offset - -120 - dBc/Hz INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Disable Input Voltage (Low) (Vil) - - 1.68 Vdc 2 Enable Input Voltage (High) (Vih) 2.275 - - Vdc 2 PECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - - 50 Ohms 3 Voltage (High) (Voh) 2.275 - - Vdc (Low) (Vol) - - 1.68 Vdc Duty Cycle 45 50 55 % 4 Rise / Fall Time 20% to 80% - 0.5 1.0 nS Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed ceramic package and metal cover.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT DA T A SHEET Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2001 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS 2 2Ec221 01 03/02/07 Output Waveform X403 M2 622.08 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Solder Profile Suggested Pad Layout Test Circuit Package Outline and Dimensions 2211 N/CN/C E/DE/D 80% 50% 20% Dimensional Tolerance: ±.005 (.127mm) Pin Connections TABLE 7.0 Pin Connection