DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

8~10 Watts AC/DC Wall Mount Power Supplies 07/03/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 4 Size: Weight: 2.20 x 1.73 x 1.08 inches 3.17oz (90g) 56.0 x 44.0 x 27.5 mm

FEATURES

  • Class II
  • RoHS Compliant
  • 10 Watts Output Power
  • 85% High Efficiency
  • Energy Star 2.0, Efficiency Level VI
  • 90-264VAC Input Voltage Range
  • 100% Burn-In Tested
  • 2 Prong Plug-in Mains Connector
  • Single Outputs Ranging from 5VDC to 48VDC
  • -40°C to +70°C Operating Temperature Range
  • Meets FCC Class B Emission Limits
  • UL/cUL (UL 60950-1: 2nd ed.) & TUV/GS (EN 60950-1: 2nd ed.) Safety Approvals
  • Optional Output Connectors Available

DESCRIPTION

The WMAPU10 series of Class II AC/DC wall mount power supplies provides 10 Watts of continuous output power in a 2.20 x 1.73 x 1.08 inch package. This series consists of single output models ranging from 5VDC to 48VDC with a 90~264VAC input voltage range and a -40°C to +70°C operating temperature. All units are UL 94V-1, RoHS, and CEC & Energy Star Level VI compliant. This series also meets new CE requirements and FCC class B emission limits. All models have UL/cUL (UL 60950-1: 2nd edition) and TUV/GS (EN 60950-1: 2nd edition) safety approvals. All units have been 100% burn-in tested. MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage (1) Output Current Total Regulation (2) Ripple & Noise Output Power No-Load Power Consumption WMAPU10-102 90 ~ 264VAC WMAPU10-104 8 ~ 11 VDC 1.25 ~ 0.90 A 5% 0.5% 10W 0.3W WMAPU10-105 11 ~ 13 VDC 0.90 ~ 0.76 A 5% 0.5% 10W 0.3W WMAPU10-106 13 ~ 16 VDC 0.76 ~ 0.62A 5% 0.5% 10W 0.3W WMAPU10-107 16 ~ 21 VDC 0.62 ~ 0.47 A 3% 0.5% 10W 0.3W WMAPU10-108 21 ~ 27 VDC 0.47 ~ 0.37 A 3% 0.5% 10W 0.3W WMAPU10-109 27 ~ 33 VDC 0.37 ~ 0.30 A 3% 0.5% 10W 0.3W WMAPU10-110 33 ~ 40 VDC 0.30 ~ 0.25 A 3% 0.5% 10W 0.3W WMAPU10-111 40 ~ 48 VDC 0.25 ~ 0.20 A 3% 0.5% 10W 0.3W NOTES 1. The output voltage is specified as a range (ex: 33~40VDC); the customer must specify what they would like the output voltage set at. 2. Models WMAPU10A-102~105 need to use AWG#20/4FT output cable in order to meet the total regulation specified. Models WMAPU10A-106~111 need to use AWG#24/4FT output cable in order to meet the total regulation specified. The regulation and efficiency will change if a different output cable is used. 3. Optional output connectors are available for this series. Please call factory for ordering details. DERATING

8~10 Watts AC/DC Wall Mount Power Supplies 07/03/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 4 TECHNICAL SPECIFICATIONS: WMAPU10 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Safety Approvals Input Voltage Range 100 240 VAC Operating Input Voltage Range 90 264 Input Frequency 47 63 Hz Input Current 100VAC, full load 0.3 A 240VAC, full load 0.3 Inrush Current 115VAC, full load, 25°C, cold start 35 40 A 230VAC, full load, 25°C, cold start 70 80 No Load Power Consumption 230VAC, no load See Table OUTPUT SPECIFICATIONS Output Voltage See Table Line Regulation LL to HL, full load 0.5 1 % Load Regulation 230VAC 3 5 % Output Power See Table Output Current See Table Ripple & Noise (peak to peak) 90VAC, full load 2 % Hold-up Time 110VAC, full load 10 ms Start-up Time 100VAC, full load 2 s Transient Response Time 100VAC, Full load to half load 4 ms Temperature Coefficient 0~50°C -0.04 +0.04 %/°C PROTECTION Over Voltage Protection none Over Current Protection none, but output is protected against short circuit conditions GENERAL SPECIFICATIONS Efficiency 230VAC, full load 71 76 85 % Dielectric Withstanding Voltage Primary to Secondary 4242 VDC Leakage Current 240VAC/60Hz 0.25 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derating linearly from 100% Load at 40°C to 50% load at 70°C -40 +70 °C Storage Temperature -40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % Cooling Free air convection MTBF MIL-HDBK-217F, 25°C 100,000 hours PHYSICAL SPECIFICATIONS Weight 3.17oz (90g) Dimensions (L x W x H) 2.20 x 1.73 x 1.08 inches (56.0 x 44.0 x 27.5 mm) AC Plug US Type Output Connector Several options available SAFETY, EMC, & COMPLIANCE Safety Approvals UL/cUL (UL60950-1: 2nd edition), TUV/GS (EN60950-1: 2nd edition), CE EMI Requirements for FCC 110VAC B Class Compliance RoHS and UL 94V-1 CEC & Energy Star CEC and Energy Star 2.0, Efficiency Level VI

8~10 Watts AC/DC Wall Mount Power Supplies 07/03/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 4 MECHANICAL DRAWING

8~10 Watts AC/DC Wall Mount Power Supplies 07/03/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 4 of 4 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in- house research and development engineers will provide a solution that exceeds your performance requirements on- time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833