WAS4644C WILLSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 Supply voltage : 2.7 ~ 4.5V  Low On Resistance : 10 Ω  Low On Capacitance : 2.5pF Typical  -3dB Bandwidth : 1.4GHz (Typ.)  WLCSP-36B package

Applications

 Dual Camera for Cell Phones  Dual LCD Monitor, Digital Camera Displays Order information Device Package Shipping WAS4644C-36/TR WLCSP-36B 3000/Reel&Tape Http//:www.sh-willsemi.com WLCSP-36B (Bottom View) Pin configuration (Top view) Marking 4644 = Device Code CA = Special Code Y = Year Code W = Week Code A B C D E F 4644 CAYW BLN3N CCLKP CLN0P CLN1P 1 32 BLN2N BLN1N BLN3P CCLKN CLN0N CLN1N BLN2P BLN1P VCC NC CLN2P CLN2N BLN0N BLN0P NC GND CLN3P CLN3N BCLKN BCLKP ALN1P ALN2P ALN3P SEL ALN0P ACLKP ALN1N ALN2N ALN3N /OE ALN0N ACLKN 4 5 6 A B C D E F

Will Semiconductor Ltd. 2 Mar, 2017 - Rev. 1.1 Pin descriptions Pin Number Symbol Descriptions A1, A2 B1, B2 C1, C2 D1, D2 E1, E2 ACLKN, ACLKP ALN0N, ALN0P ALN1N, ALN1P ALN2N, ALN2P ALN3N, ALN3P Port A for MIPI 1-Clock and 4-Lane differential signal A3, B3 A4, B4 A5, A6 B5, B6 C5, C6 BCLKP , BCLKN BLN0P , BLN0N BLN1P , BLN1N BLN2P , BLN2N BLN3P , BLN3N Port B for MIPI 1-Clock and 4-Lane differential signal D5, D6 E5, E6 F5, F6 F4, E4 F3, E3 CCLKN, CCLKP CLN0N, CLN0P CLN1N, CLN1P CLN2N, CLN2P CLN3N, CLN3P Port C for MIPI 1-Clock and 4-Lane differential signal F1 /OE Enable control, Active Low. Port A, B, C is High impedance while /OE=High F2 SEL Port selection control, SEL=0, Port A = Port B SEL=1, Port A = Port C C4 VCC Power supply D3 GND Ground C3, D4 NC Not Connected Block Diagram & Typical Applications Block Diagram Typical Applications CLKP/CLKN LN0P/LN0N LN1P/LN1N LN2P/LN2N LN3P/LN3N CLKP/CLKN LN0P/LN0N LN1P/LN1N LN2P/LN2N LN3P/LN3N CLKP/CLKN LN0P/LN0N LN1P/LN1N LN2P/LN2N LN3P/LN3N WAS4644 Application Processor Camera 1 Camera 2 Port A Port BPort C Control Logic /OE SEL GND AxxxP VCC AxxxN BxxxP BxxxN CxxxP CxxxN

Will Semiconductor Ltd. 3 Mar, 2017 - Rev. 1.1 Absolute maximum ratings Parameter Symbol Value Unit Supply voltage range VCC -0.5 ~ 5.5 V Data input/output voltage range VDATA -0.5 ~ 5.5 V Select input voltage range VSEL -0.5 ~ 5.5 V Continues output current IOUT ± 50 mA Junction temperature range TJ 150 oC Lead temperature range TL 260 oC Storage temperature range TSTG -65 ~ 150 oC Thermal resistance RθJA 250 oC/W ESD protection (HBM) I/O to VCC, I/O to GND ± 7000 V I/O to I/O ± 5000 V Recommend operating ratings Parameter Symbol Value Unit Supply voltage range VCC 2.7 ~ 4.5 V Data input/output voltage range VDATA 0.0 ~ 1.2 V Select input voltage range VSEL 0.0 ~ VCC V Enable control input voltage range VOE 0.0 ~ VCC V Operating temperature range TA -40 ~ 85 oC Note: 1) “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. 2) The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. 3) Control input (/OE, SEL) must be held high or Low, it must not float.

Will Semiconductor Ltd. 4 Mar, 2017 - Rev. 1.1 Electronics Characteristics (Ta=25oC, VCC=3.6V, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Unit Power Supply and Digital Input Characteristics Select and OE logic high level VIH VCC=3.6～4.5V 1.5 V VCC=2.3～3.6V 1.3 V Select and OE logic low level VIL VCC=3.6～4.5V 0.6 V VCC=2.3～3.6V 0.4 V Supply quiescent current ICC OE=0V 85 120 uA OE=VCC 1 uA Analog Switch Characteristics On-Resistance RON VCC=3.0V, VDATA=0~0.4V, IOUT=10mA 10 12 Ω On-Resistance match ∆ RON VCC=3.0V, VDATA=0~0.4V, IOUT=10mA 0.5 Ω On-Resistance flatness RFLAT(ON) VCC=3.0V, VDATA=0~0.4V, IOUT=10mA 0.5 Ω Dynamic Characteristics Enable turn-on time, OE to Output TEN CL=5pF, RL=50Ω, VSW=1.2V 150 180 us Disable turn-off time, OE to Output TEN CL=5pF, RL=50Ω, VSW=1.2V 100 120 ns Select input to switch on time TON CL=5pF, RL=50Ω, VSW=1.2V 100 120 ns Select input to switch off time TOFF CL=5pF, RL=50Ω, VSW=1.2V 200 300 ns Break-Before-Make time TBBM CL=5pF, RL=50Ω, VSW=1.2V 50 ns AC Characteristics -3dB Bandwidth BW RL=50Ω, CL=0pF 1.1 1.4 GHz Off isolation OIRR RL=50Ω, F=750MHz VSW=-0dBm -39 dB Crosstalk Xtalk RL=50Ω, F=750MHz VSW=-0dBm -43 dB Capacitance Select pin input capacitance CIN VCC=0V, F=1MHz 3 pF Out Off capacitance COFF VCC=3.3V, OE=3.3V, F=1MHz 2 pF Out On capacitance CON VCC=3.3V, OE=0V, F=1MHz 2.5 pF

Will Semiconductor Ltd. 5 Mar, 2017 - Rev. 1.1 Package outline dimensions WLCSP-36B Symbol Dimensions in millimeter Min. Typ. Max. A 0.445 0.500 0.555 A1 0.175 0.195 0.215 A2 0.240 0.265 0.290 A3 0.030 0.040 0.050 D 2.360 2.385 2.410 E 2.360 2.385 2.410 e1 0.400 e2 0.400 d 0.250 0.270 0.290

Will Semiconductor Ltd. 6 Mar, 2017 - Rev. 1.1 TAPE AND REEL INFORMATION Reel Dimensions Tape Dimensions Quadrant Assignments For PIN1 Orientation In Tape RD Reel Dimension W Overall width of the carrier tape 1 P1 Pitch between successive cavity centers Pin1 Pin1 Quadrant User Direction of Feed Reel Dimensions RD W Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 7inch 13inch 2mm 4mm 8mm 8mm 12mm 16mm