WA100 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
3 Watts
- 2:1 Input Range
- Optional 4:1 Input Range
- Efficiency to 74%
- Input Pi Filter
- Fully Regulated Outputs
- Optional 3 kVDC Isolation
- UL Approved Versions WA Series Input Input Voltage Range • 5 V (4.5-6.0 VDC)
12 V (9-18 or 9-36 VDC - A version)
24 V (18-36 or 18-72 VDC - A version)
48 V (36-72 VDC)
Input Current • See table Input Filter • Pi network Undervoltage Lockout • Turn On > 65% nominal input Turn Off < 62% nominal input Output Output Voltage • See table Output Voltage Balance • ±1% max, dual output models Intial Set Accuracy • ±2% max Start Up Delay • 30 ms max Start Up Rise Time • 35 ms typical Line Regulation • ±0.5% max (high line to low line) Load Regulation • ±0.5% max for 10-100% load change single output models, ±1.0% max for 25-100% load change dual output models Cross Regulation • 2.2% on dual output models Transient Response • <1.5% max deviation, recovering within 200 µs for a 50% load change Ripple & Noise • 100 mV or 1% pk-pk, whichever is greater, 20MHz BW Overcurrent Protection • 110-130% trip and restart (Hiccup mode) Short Circuit Protection • Continuous with auto recovery Maximum Capacitive • 30,000 µF Load Temperature • ±0.05 /°C max Coefficient xppower.com General Efficiency • See table Isolation • 500 VDC Input to Output (1000 M Ω/80 pF) Optional high isolation version,
3000 VDC Input to Output, add suffix ‘X’
Switching Frequency • 100 kHz typical MTBF • 1,000 kHrs to MIL-HDBK-217F Environmental Operating Temperature • -25 ºC to +70 ºC Case Temperature • +95 ºC max Storage Temperature • -40 ºC to +100 ºC EMC & Safety Emissions • EN55022, level A conducted EN55022, level A radiated ESD Immunity • EN61000-4-2, level 2 Performance Criteria A Radiated Immunity • EN61000-4-3 3 V/m Performance Criteria A Conducted Immunity • EN61000-4-6 3 V rms Performance Criteria A Safety Approvals • UL1950 for XU versions only DC-DC
Voltage (1,2,5) Output Voltage Output Current Input Current (6) Efficiency Model Number (3,4)No Load Full Load 4.5-6.0 VDC 3.3 VDC 600 mA 15.0 mA 619 mA 64% WA100 5.0 VDC 600 mA 15.0 mA 850 mA 70% WA101 12.0 VDC 250 mA 15.0 mA 800 mA 75% WA102 15.0 VDC 200 mA 15.0 mA 800 mA 75% WA103 ±5.0 VDC ±250 mA 25.0 mA 850 mA 70% WA104 ±12.0 VDC ±125 mA 25.0 mA 800 mA 75% WA105 ±15.0 VDC ±100 mA 25.0 mA 800 mA 75% WA106 9-18 VDC 3.3 VDC 600 mA 7.5 mA 236 mA 70% WA200 5.0 VDC 600 mA 7.5 mA 340 mA 73% WA201 12.0 VDC 250 mA 7.5 mA 320 mA 78% WA202 15.0 VDC 200 mA 7.5 mA 320 mA 78% WA203 ±5.0 VDC ±250 mA 12.0 mA 340 mA 73% WA204 ±12.0 VDC ±125 mA 12.0 mA 320 mA 78% WA205 ±15.0 VDC ±100 mA 12.0 mA 320 mA 78% WA206 18-36 VDC 3.3 VDC 600 mA 5.0 mA 113 mA 73% WA300 5.0 VDC 600 mA 5.0 mA 168 mA 74% WA301 12.0 VDC 250 mA 5.0 mA 156 mA 80% WA302 15.0 VDC 200 mA 5.0 mA 156 mA 80% WA303 ±5.0 VDC ±250 mA 7.5 mA 168 mA 74% WA304 ±12.0 VDC ±125 mA 7.5 mA 156 mA 80% WA305 ±15.0 VDC ±100 mA 7.5 mA 156 mA 80% WA306 36-72 VDC 3.3 VDC 600 mA 3.0 mA 58 mA 71% WA400 5.0 VDC 600 mA 2.0 mA 82 mA 76% WA401 12.0 VDC 250 mA 2.0 mA 78 mA 80% WA402 15.0 VDC 200 mA 2.0 mA 78 mA 80% WA403 ±5.0 VDC ±250 mA 3.0 mA 82 mA 76% WA404 ±12.0 VDC ±125 mA 3.0 mA 80 mA 78% WA405 ±15.0 VDC ±100 mA 3.0 mA 80 mA 78% WA406 Notes 1. Nominal input voltage 5, 12, 24 or 48 VDC. 2. For optional 4:1 input range: 9-36 VDC: Add suffix ‘A’ to WA2xx model number, 18-72 VDC: Add suffix ‘A’ to WA3xx model number. 3. For 3000 VDC isolation add suffix ‘X’ to model number. 4. For UL1950 approval, add suffix ‘XU’ to model number. UL approved product is only available with 3000 VDC isolation and option ‘X’ pinout. 5. ‘X’ or ‘XU’ versions are not available with optional 4:1 input range. 6. Input current is at nominal input voltage. 0.02 (0.5) 0.08 (2.0) 0.10 (2.5) 1.25 (31.8) 0.5 (12.7) Max 0.15 (3.8) 23 22 10 11 12 15 14 13 0.60 (15.2) 0.80 (20.3) BOTTOM VIEW PIN CONNECTIONS Pin Single Output Dual Output 1 +V input +V input
2 N/C -V output
3 N/C Common
9 No pin No pin
16 No pin No pin
22 N/C Common
23 N/C -V output
OPTION ‘X’ PIN CONNECTIONS Pin Single Output Dual Output
1 No pin No pin
9 N/C Common
10 N/C N/C
11 N/C -V output
12 No pin No pin
13 No pin No pin
15 N/C N/C
24 No pin No pin
All dimensions are in inches (mm) Weight: 0.04 lbs (20 g) approx.