W0402R-01-MQPB

PFC_V02 TTELEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

Standard 60/40 Sn/Pb and Pb-free (RoHS compliant) terminations available Available in 0402, 0603, 0805 and 1206 Tested for COTS applications Absolute TCR to ±10ppm/°C MIL screening available Superior anti-sulfuration characteristics IRC Advanced Film Division General Note IRC reserves the right to make changes in product speci/f_ication without notice or liability . All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com PFC Series Issue August 2011 Sheet 1 of 4 Non-leaching Nickel barrier Wrap around termination Ultra stable Tantalum Nitride resistor film system Precision Thin Film Chip Resistors PFC Series

• Standard 60/40 Sn/Pb and Pb-free (RoHS compliant) terminations available
• Available in 0402, 0603, 0805 and 1206
• Tested for COTS applications
• Absolute TCR to ±10ppm/°C MIL screening available Superior anti-sulfuration characteristics The TaNFilm ® PFC chip resistor series provides the high precision and ultra stable performance of our Tantalum Nitride resistive film system in 0402, 0603, 0805 and 1206 sizes. The unique characteristics of the passivated Tantalum Nitride film ensure long term life stability and reliability in most environments. Qualified for resistance to sulfur bearing gases, the PFC series is an excellent solution for automotive and heavy equipment applications where precision, exceptional reliability with anti-sulfuration characteristics is imperative. Electrical Data Model Power Rating (70°C) Max Voltage Rating ( P x R) Temperature Range ESD Sensitivity Noise Termination Substrate W0402 50mW 75V -65°C to +150°C 2KV to 4KV (HBM) <-25dB 100% matte tin (RoHS compliant) plated over nickel barrier 99.5% Alumina W0603 100mW 75V W0805 250mW 100V W1206 333mW 200V Environmental Test Test Method Performance Typical Maximum Sulfuration Test (ASLF terminations only) ASTM B-809 (Modified) 105°C Dry, 1000 Hours ±0.02% ±0.05% Thermal Shock MIL-PRF-55342 ±0.02% ±0.10% Low Temperature Operation MIL-PRF-55342 ±0.01% ±0.05% Short Time Overload MIL-PRF-55342 ±0.01% ±0.05% High Temperature Exposure MIL-PRF-55342 ±0.03% ±0.10% Effects of Solder MIL-PRF-55342 ±0.01% ±0.10% Moisture Resistance MIL-PRF-55342 ±0.03% ±0.10% Life MIL-PRF-55342 ±0.03% ±0.10% Environmental Data Using the same manufacturing line as the PFC Military Series, these precision chips maintain the same superior environmental performance. Specially selected materials and processes ensure initial precision is maintained in the harshest surface mount soldering environment. Wrap-around terminations with leach-resistant nickel barriers ensure high integrity solder connections. Resistors 09.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn All Pb-free parts comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3)All Pb-free parts comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3)

PFC Special Series IRC Advanced Film Division PFC Series Issue August 2011 Sheet 2 of 4

• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com Precision Thin Film Chip Resistors Manufacturing Capabilities Data ±25 ppm/°C ±50 or ±100 ppm/°C W1206 5Ω 10Ω 50Ω 100Ω 200Ω 400KΩ 650KΩ 1.0MΩ W0805 5Ω 10Ω 50Ω 100Ω 200Ω 100KΩ 180KΩ 267KΩ Resistance Range ±15 ppm/°C ±10 ppm/°C 30KW0402 50Ω W0603 5Ω 10Ω 50Ω 100Ω 200Ω 50KΩ 75KΩ 100KΩ Tolerance Resistance Range TCR TCR Tolerance ±25, ±50 or ±100 ppm/°C Ω IRC Advanced Film Division PFC Series Issue August 2011 Sheet 4 of 4
• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com L a W H b TO P SIDEBOTTOM Model L W H a b W0402 W0603 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.02 ±0.004 (0.51 ±0.1) 0.02 ±0.006 (0.51 ±0.15) 0.024 ±0.004 (0.61 ±0.1) 0.008 ±0.002 (0.2 ±0.05) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.008 (0.38 ±0.2) 0.025 ±0.01 (0.64 ±0.25) 0.01 ±0.002 (0.25 ±0.05) 0.015 ±0.005 (0.38 ±0.13) 0.016 ±0.008 (0.41 ±0.2) 0.025 ±0.01 (0.64 ±0.25) 0.031 ±0.004 (0.79 ±0.1) 0.05 ±0.005 (1.27 ±0.13) 0.063 ±0.005 (1.6 ±0.13) 0.063 ±0.004 (1.6 ±0.1) 0.081 ±0.005 (2.06 ±0.13) 0.126 ±0.006 (3.2 ±0.15) W0805 W1206 Physical Data IRC’s PFC chip resistors are available with MIL screening. These chips are manufactured on the same production line as our Mil- qualified chip resistors and screened in accordance with MIL-PRF-55342. These chips are identified with IRC’s ordering information and not with MIL marking. MIL Screened Precision Chip Resistors Precision Thin Film Chip Resistors Power Derating Curve 09.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn TCR ppm/°C Tolerance % W0402 W0603 W0805 W1206 10 100Ω-16kΩ 100Ω-16kΩ1 100Ω-50kΩ 100Ω-50kΩ1 100Ω-100kΩ 100Ω-100kΩ1 100Ω-400kΩ 100Ω-400kΩ1 15 50Ω-16kΩ 50Ω-16kΩ1 50Ω-50kΩ 50Ω-50kΩ1 50Ω-100kΩ 50Ω-100kΩ1 50Ω-400kΩ 50Ω-400kΩ1 50Ω-16kΩ 10Ω-24kΩ 10Ω-30kΩ2 50Ω-50kΩ 10Ω-75kΩ 10Ω-100kΩ1 50Ω-100kΩ 10Ω-180kΩ 10Ω-267kΩ1 50Ω-400kΩ 10Ω-650kΩ 10Ω-1MΩ1 50, 100 7.5Ω-30kΩ2 5Ω-100kΩ1 5Ω-267kΩ1 5Ω-1MΩ1 Notes 1. For Pb-free, unscreened PFC chips see separate PFC Commercial Series datasheet 2. For Pb-free, unscreened PFC chips at values ≥15R see separate PFC Commercial Series datasheet MIL Screened Precision Chip Resistors IRC’s PFC chip resistors are available with MIL screening. These chips are manufactured on the same production line as our Mil-qualified chip resistors and screened in accordance with MIL-PRF-55342. These chips are identified with IRC’s ordering information and not with MIL marking. See separate MIL-CHIP datasheet. PFC Series Datasheet Changes
• Title in P1 and header: change from PFC Series to PFC Special Series
• Manufacturing Capabilities Data: replace figure with the following table: TCR ppm/°C Tolerance % W0402 W0603 W0805 W1206 10 100Ω-16kΩ 100Ω-16kΩ1 100Ω-50kΩ 100Ω-50kΩ1 100Ω-100kΩ 100Ω-100kΩ1 100Ω-400kΩ 100Ω-400kΩ1 15 50Ω-16kΩ 50Ω-16kΩ1 50Ω-50kΩ 50Ω-50kΩ1 50Ω-100kΩ 50Ω-100kΩ1 50Ω-400kΩ 50Ω-400kΩ1 25 50Ω- 16kΩ 10Ω- 24kΩ 10Ω-30kΩ2 50Ω- 50kΩ 10Ω- 75kΩ 10Ω-100kΩ1 50Ω- 100kΩ 10Ω- 180kΩ 10Ω-267kΩ1 50Ω- 400kΩ 10Ω- 650kΩ 10Ω-1MΩ1 50, 100 7.5Ω-30kΩ2 5Ω-100kΩ1 5Ω-267kΩ1 5Ω-1MΩ1 Notes 1. For Pb-free, unscreened PFC chips see separate PFC Commercial Series datasheet 2. For Pb-free, unscreened PFC chips at values ≥15R see separate PFC Commercial Series datasheet
• Replace power derating curve with standard format graph below:
• MIL Screened Precision Chip Resistors: Delete line break after MIL-PRF-55342.
• MIL Screened Precision Chip Resistors: Add See separate MIL-CHIP datasheet.
• Ordering Procedure USA (IRC) Mil Screened - footnote: Change Please refer to PFC Military datasheet…. to Please refer to MIL-CHIP datasheet…. END

This product has two valid part numbers: European (Welwyn) Part Number: W1206R-01-1K0BI (1206, 100ppm/°C, 1 kilohm ±0.1%, Pb-fre Pb-free W 1 2 0 6 R - 0 1 - 1 K 0 B I 1 2 3 4 5 6 USA (IRC) Commercial Part Number: PFC-W1206LF-01-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%, ) P F C - W 1 2 0 6 L F - 0 1 - 1 0 0 1 - B 1 2 3 4 5 6 Dimensions in inches (mm) Model L W H a b W0402 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.008 ±0.002 (0.2 ±0.05) 0.01 ±0.002 (0.25 ±0.05) W0603 0.063 ±0.004 (1.6 ±0.1) 0.031 ±0.004 (0.79 ±0.1) 0.02 ±0.004 (0.51 ±0.1) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.005 (0.38 ±0.13) W0805 0.081 ±0.005 (2.06 ±0.13) 0.05 ±0.005 (1.27 ±0.13) 0.02 ±0.006 (0.51 ±0.15) 0.015 ±0.008 (0.38 ±0.2) 0.016 ±0.008 (0.41 ±0.2) W1206 0.126 ±0.006 (3.2 ±0.15) 0.063 ±0.005 (1.6 ±0.13) 0.024 ±0.004 (0.61 ±0.1) 0.025 ±0.01 (0.64 ±0.25) 0.025 ±0.01 (0.64 ±0.25) 1 2 3 4 5 6 Type Size TCR Value Tolerance Termination & Packing W=PFC 0402 R-12 = ±10ppm/°C E24 = 3/4 characters E96 = 3/4 characters R = ohms K = kilohms M = megohms Q = ±0.02% I = Pb-free, Standard pack 0603 R-11 = ±15ppm/°C A = ±0.05% PB = SnPb finish, Standard pack 0805 R = ±25ppm/°C B = ±0.1% All sizes 1000/reel G = ±2% J = ±5% 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 12 = ±10ppm/°C 3 digits + multiplier Q = ±0.02% All sizes 1000/reel W0603 LF = Pb-free (100%Sn) 11 = ±15ppm/°C R = ohms for values <100 ohms A = ±0.05% W0805 ASLF = Anti-sulfur & Pb-free (100%Sn) G = ±2% J = ±5% Physical Data Ordering Procedure This product has two valid part numbers: European (Welwyn) Part Number: W1206R-01-1K0BI (1206, 100ppm/°C, 1 kilohm ±0.1%, Pb-fre Pb-free W 1 2 0 6 R - 0 1 - 1 K 0 B I 1 2 3 4 5 6 USA (IRC) Commercial Part Number: PFC-W1206LF-01-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%, ) P F C - W 1 2 0 6 L F - 0 1 - 1 0 0 1 - B 1 2 3 4 5 6 Dimensions in inches (mm) Model L W H a b W0402 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.008 ±0.002 (0.2 ±0.05) 0.01 ±0.002 (0.25 ±0.05) W0603 0.063 ±0.004 (1.6 ±0.1) 0.031 ±0.004 (0.79 ±0.1) 0.02 ±0.004 (0.51 ±0.1) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.005 (0.38 ±0.13) W0805 0.081 ±0.005 (2.06 ±0.13) 0.05 ±0.005 (1.27 ±0.13) 0.02 ±0.006 (0.51 ±0.15) 0.015 ±0.008 (0.38 ±0.2) 0.016 ±0.008 (0.41 ±0.2) W1206 0.126 ±0.006 (3.2 ±0.15) 0.063 ±0.005 (1.6 ±0.13) 0.024 ±0.004 (0.61 ±0.1) 0.025 ±0.01 (0.64 ±0.25) 0.025 ±0.01 (0.64 ±0.25) 1 2 3 4 5 6 Type Size TCR Value Tolerance Termination & Packing W=PFC 0402 R-12 = ±10ppm/°C E24 = 3/4 characters E96 = 3/4 characters R = ohms K = kilohms M = megohms Q = ±0.02% I = Pb-free, Standard pack 0603 R-11 = ±15ppm/°C A = ±0.05% PB = SnPb finish, Standard pack 0805 R = ±25ppm/°C B = ±0.1% All sizes 1000/reel G = ±2% J = ±5% 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 12 = ±10ppm/°C 3 digits + multiplier Q = ±0.02% All sizes 1000/reel W0603 LF = Pb-free (100%Sn) 11 = ±15ppm/°C R = ohms for values <100 ohms A = ±0.05% W0805 ASLF = Anti-sulfur & Pb-free (100%Sn) G = ±2% J = ±5% USA (IRC) Mil Screened Part Number*: PFC-W1206R-05-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%,) P F C - W 1 2 0 6 R - 0 5 - 1 0 0 1 - B 1 2 3 4 5 6 * Please refer to the PFC Military datasheet to order parts qualified to MIL-PRF-55342. 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 16 = ±10ppm/°C 3 digits + multiplier All sizes 1000/reel W0603 15 = ±15ppm/°C R = ohms for values <100 ohmsW0805 14 = ±20ppm/°C B = ±0.1% W1206 07 = ±25ppm/°C D = ±0.5% 06 = ±50ppm/°C F = ±1% 05 = ±100ppm/°C G = ±2% 04 = ±300ppm/°C J = ±5% 09.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn * Please refer to the MIL-CHIP datasheet to order parts qualified to MIL-PRF-55342.