VF001S6 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • EMI Filter 2 channel (fc=90MHz).
  • Contact discharge 20kV guarantee (IEC61000-4-2).
  • Small-size 6-pin package (SCH6 : 1.6 ×1.6 mm) Specifi cations Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings Unit min typ max Reverse Voltage V R IR=1mA 6 8 V Reverse Current IR VR=3.3V 1 μA Line Capacitance CV IN=0V, f=1MHz 60 pF Line Resistor R I=10mA 40 60 Ω Cut Off Fequency fc V=0V 90 MHz Electrostatic Breakdown Voltage V ESD C=150pF , R=330Ω, Contact discharge (IEC61000-4-2) 20 kV Marking : G1 D0308AP MS IM TC-00001762 SANYO Semiconductors DATA SHEET VF001S6 2 Channel EMI Filter with ESD Protection www.semiconductor-sanyo.com/network

No. A1363-2/3 Package Dimensions Electrical Connection unit : mm (typ) 7028-009 Application Example 1.6 1.6 1.50.05 0.5 0.05 0.560.25 0.2 0.2 1 32 64 5 1 : IN1 2 : GND 3 : IN2 4 : OUT2 5 : GND 6 : OUT1 SANYO : SCH6 654 123 1 : IN1 2 : GND 3 : IN2 4 : OUT2 5 : GND 6 : OUT1 Top view example : Keypad SIM card SD card IT14225 ICInput Interface * Since the filter circuits are symmetrical, all terminals can be used as input/output port. DC Input V oltage, VIN -- V Line Capacitance, C -- pF Resistance -- Ta Line Resistance -- Ω Capacitance -- DC VIN Ambient Temperature, Ta -- °CIT14219 05 1234 IT14220 --50 --30--40 --20 --10 0 10 20 30 40 50 60 80 70 90

No. A1363-3/3 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. PS This catalog provides information as of December, 2008. Specifi cations and information herein are subject to change without notice. Insertion Loss -- Frequency Insertion Loss -- dB VIN -- IIN Freqency -- MHzInput Current, IIN -- μA Input V oltage, VIN -- V Insertion Loss -- Frequency Insertion Loss -- dB Freqency -- MHz Crosstalk -- Frequency Crosstalk -- dB Freqency -- MHz 1.020.1 35 1023 5 10023 5 100023 5 1000023 523 50.01 IT14221 IT14222 1.023 5 1023 5 10023 5 100023 5 1000023 50.1 --35 --30 --25 --10 --5 --20 --15 IN1 - OUT1@2.5VIN1 - OUT1@0V IT14223 1.023 5 1023 5 10023 5 100023 5 1000023 50.1 --35 --30 --25 --10 --5 --20 --15 IN2 - OUT2@2.5VIN2 - OUT2@0V Output port is not connected Measured in 50Ω system 1.023 5 1023 5 10023 5 100023 5 1000023 50.1 --100 --70 --80 --90 --40 --50 --60 --30 --20 IT14224 Measured in 50Ω system