VCS50US05 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- Ch assisMoun tIndustrialSupplies
- -25 °C to+70 °C ConvectionC ooled
- Class B Conducted & RadiatedEmissions
- Ou tputVoltages from 5 V to48 V
- <0 .5W No Load InputPower
- Low Co st
- 2 YearWa rranty VCS Series Input InputVoltage • 85-264 VAC (127-370VDC), see deratingcurve InputFrequency • 47-63 Hz InputCurrent • VCS50: 1.1 A,VCS70:1.4 A, VCS100: 2.0A typicalat90 VAC InrushCurrent • 60 A max at230 VAC, coldstartat25 °C Power Factor • EN61000-3-2 ClassA EarthLeakage Current • 1.0 mA maximum InputProtection • 50 & 70W: T3.15 A/250V 100 W: T4.0A/250V,fusefittedinliveline No Load InputPower • <0.5 W Output Output Voltage • See model table Output Adjust • ±10.0% (5V & 12 V versionsare-5% to+10%) InitialSet Tolerance • ±1.0% Minimum Load • None required StartUp Delay •1 s maximum Hold Up Time • 10 ms min at115 VAC and fullload LineRegulation • ±0.5%, 90 VAC to264 VAC input Load Regulation • 5 V & 12 V versions:±1%, Others:±0.5% 0% to100% load TransientResponse • Less than4% deviationwitha 50% to 75% loadchange at1 A/µs.Output returnstowithin1% inlessthan500 µs Ripple& Noise • 1% maximum pk-pk,20 MHz bandwidth OvervoltageProtection • 120-140% ofnominaloutput, autorecovery OverloadProtection • 110-150% ofnominal,tripand restart ShortCircuitProtection • Continuoustripand restart Temperature • ±0.03%/°C after20 min warm up Coefficient xppo w er.com Ge neral Efficiency • See tables Isolation • 3000 VAC InputtoOutput
1500 VAC InputtoGround
500 VAC OutputtoGround
SwitchingFrequency • 65 kHz typical MTBF • >500 kHrstoMIL-STD-217F at25 °C,GB Environm ental OperatingTemperature • -25°C to+70°C,see deratingcurve Cooling • Convectioncooled OperatingHumidity • 0-95% R.H,non-condensing StorageTemperature • -40 °C to+80 °C OperatingAltitude • 3000 m Shock • ±3 x 30 g shocks ineach plane, 30 g:11 ms (±0.5ms),halfsine,compliant toEN60068-2-27 & EN60068-2-47 Vibration • 10-500 Hz at2 g sweep and enduranceat resonanceinall3 planes.Conforms to EN60068-2-6 EMC & Safety Emissions • EN55022 ClassB conducted & radiated Harmonic Currents • EN61000-3-2 classA VoltageFlicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level3 PerfCriteriaA RadiatedImmunity • EN61000-4-3, level3 PerfCriteriaA EFT/Burst • EN61000-4-4, level3 PerfCriteriaA (note3) Surge • EN61000-4-5, installationClass3, PerfCriteriaA Conducted Immunity • EN61000-4-6, level3 PerfCriteriaA Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, PerfCriteriaA,B, B SafetyApprovals • IEC60950-1, CSA C22.2 No.60950-1-03, UL60950-1, TUV EN60950-1
Output Power Output Voltage Output Current Ripple& Noise (2) Efficiency (1) Model Number 40 W 5.0V 8.00A 50 mV 79% VCS50US05 †^ 50 W 12.0 V 4.20 A 120 mV 85% VCS50US12 †^ 15.0 V 3.30A 150 mV 86% VCS50US15 †^ 24.0 V 2.10 A 240 mV 88% VCS50US24 †^ 48.0 V 1.05 A 480 mV 88% VCS50US48 †^ 4.35 (110.5) M3 4 locations 0.75 (19.0) 0.59 (15.0) 1.14 (29.0) 3.07 (78.0) 3.82 (97.0) M3 3 locations 0.14 (3.5) 0.98 (25.0) 0.157 (4.0) 0.43 (11.0) 0.70 (17.7) 1.38 (35.0) 0.47 (12.0) 0.41 (10.5) Pin Function
1 AC Live
2 AC Neutral
3 Ground
1 .Alldimensions in inches (mm ) 2.W eight:0.55 lbs (250 g)approx 3.Tolerance ±0.02 (±0.5) 4 .Ma ximum mo unting screw penetration 0.1 57(4.0)from outersurface Notes DeratingCurves Output Power (%) Ambient Temperature (°C) 0 10 -10 -25 20 30 40 50 60 70 100 Output Power (%) Input Voltage (VAC) 90 100 110 120 230 240 250 85 264 100 Notes 1.Minimum averageofefficiencies measured at25%, 50%, 75% & 100% load. 2.R ipple & N oisem ay exceed specified values below -10 °C. 3.Level3 performance criteria A is m etforloads >2%. Atno load, resultis perform ance criteria A Level2 or less than4% outputdeviation atLevel3. † Availablefrom Farnell& elemen t14. See pages 284-290. ^ Availablefrom Newark. See pages 291-296.
AC-DC VCS 70 M odeland Ratings Mec hanicalDetails 5.12 (130.0) 3.88 (98.5) 3.07 (78.0) 0.14 (3.5) 0.20 (5.0) 0.22 (5.5) 1.61 (41.0) 0.80 (20.3) 0.75 (19.0) 1.21 (30.8) 0.43 (11.0) Ø 0.13 (3.3) M3 3 locations 3.55 (90.1) 0.22 (5.5) 0.14 (3.5) 0.2 (5.1) 3.08 (78.3) 0.20 (5.2) Ø 0.13 (3.3) 1.36 (34.5) 1.26 (32.0) M3 2 locations DeratingCurves Output Power (%) Ambient Temperature (°C) 0 10 -10 -25 20 30 40 50 60 70 100 Output Power (%) Input Voltage (VAC) 90 100 110 120 230 240 250 85 264 100 Output Power Output Voltage Output Current Ripple& Noise (2) Efficiency (1) Model Number 50 W 5.0V 10.0 A 50 mV 80% VCS70US05 †^ 70W 12.0 V 5.83A 120 mV 87% VCS70US12 †^ 15.0 V 4.67 A 150 mV 87% VCS70US15 †^ 24.0 V 2.92A 240 mV 87% VCS70US24 †^ 48.0 V 1.46 A 480 mV 87% VCS70US48 †^ Pin Function 1 .Alldim ensions in inches (mm ) 2.W eight:0.88 lbs (400 g)approx 3.Tolerance ±0.02 (±0.5) 4 .M axim um m ounting screw penetration 0.157(4.0)from outersurface Notes Notes 1.M inimum averageofefficiencies measured at25%, 50%, 75% & 100% load. 2.R ipple & No isem ay exceed specified valuesbelow -10 ˚C. 3.For allloads. † Available from Farnell& eleme nt14. See pages 284-290. ^ Availablefrom Newa rk.See pages 291-296.
Output Power (%) Ambient Temperature (°C) 0 10 -10 -25 20 30 40 50 60 70 100 Output Power (%) Input Voltage (VAC) 90 100 110 120 230 240 250 85 264 100 3.87 (98.2) 6.26 (159.0) 5.49 (139.5) 0.24 (6.0) 1.08 (27.5) Ø0.13 (3.3) 0.87 (22.2) 0.71 (18.0) 0.37 (9.3) 1.02 (26.0) 0.74 (18.8) 1.65 (42.0) M3 3 locations 0.19 (4.8) 0.16 (4.0) 3.07 (78.0) 0.24 (6.0) 0.2 (5.0) 0.16 (4.0) 1.26 (32.0) 0.90 (24.0) 0.20 (5.0) 3.52 (89.5) 0.16 (4.0) 1.30 (33.0) M3 4 locations Pin Function Output Power Output Voltage Output Current Ripple& Noise (2) Efficiency (1) Model Number 70W 5.0V 14.0 A 50 mV 78.0% VCS100US05 †^ 100 W 12.0 V 8.33A 120 mV 85.0% VCS100US12 †^ 15.0 V 6.67 A 150 mV 86.0% VCS100US15 †^ 24.0 V 4.17 A 240 mV 86.5% VCS100US24 †^ 48.0 V 2.08A 480 mV 88.0% VCS100US48 †^ 1 .Alldim ensions in inches (mm ) 2.W eight:1 .1 lbs (500 g)approx 3.Tolerance ±0.02 (±0.5) 4 .M axim um m ounting screw penetration 0.1 57(4.0)from outersurface Notes Notes 1.Minimum average ofefficiencies m easured at25%, 50%, 75% & 100% load. 2.Ripple& No isem ay exceed specifiedvaluesbelow -10 ˚C. 3.Level3 performan ce criteria A is m etforloads >10%. Atno load, resultis performance criteria A atLevel2 orlessthan5% outputdeviation atLevel3. † Availablefrom Farnell& elemen t14. See pages 284-290. ^ Availablefrom Newark. See pages 291-296.