VCP05US033 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
5 Watts
- Energy Star, CEC & EISA Compliant
- ITE Approvals
- PCB Mount
- Class II Construction
- Compact Dimensions
- EN55022 Class B Emissions
- Low Cost VCP05 Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • 0.2 A max at 90 VAC Inrush Current • 40 A max at 240 VAC Power Factor • Conforms to EN61000-3-2, class A Output Output Voltage • See table Initial Set Accuracy • ±5% at 50% load Minimum Load • No minimum load required Start Up Delay • 2 s max Start Up Rise Time • 100 ms typical Hold Up Time • 5 ms typical at full load and 115 VAC Line Regulation • ±0.5% max Load Regulation • ±5% max Transient Response • 10% max. deviation, recovery to <1% within 500 µs for a 50% step load change at 0.2 A/µs Ripple & Noise • See table Overvoltage Protection• See table Overload Protection • 120-180%, auto recovery Short Circuit Protection• Trip and restart (Hiccup mode) Temperature • 0.2 %/˚C Coefficient xppower.com General Efficiency • See table Isolation • 3000 VAC Input to Output Switching Frequency • 60 kHz typical MTBF • 100 kHrs per MIL-HDBK-217F Environmental Operating Temperature• 0 ˚C to +40 ˚C Cooling • Natural convection Operating Humidity • 10-90% RH, non-condensing Storage Temperature • -20 ˚C to +60 ˚C Shock • Able to survive 1m drop onto concrete on each of 6 axes Vibration • 10-300 Hz, 2 g 15 mins/sweep. 30 mins for each of 3 axes EMC & Safety Emissions • EN55022, level B conducted & radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, ±4kV contact, ±8kV air, Perf Criteria A Radiated Immunity • EN61000-4-3, 3 V/m, Perf Criteria A EFT/Burst • EN61000-4-4, level 2, Perf Criteria A Surge • EN61000-4-5, level 3, Perf Criteria A Conducted Immunity • EN61000-4-6, 3 V, Perf Criteria A Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals • EN60950, cUL60950, IEC60950 AC-DC
Ripple & Noise(1) Overvoltage Trip Efficiency Model Number 4 W 3.3 V 1.2 A 150 mV 10 V 55% VCP05US033
5 W 5 V 1 A 150 mV 10 V 57% VCP05US05
5 W 9 V 0.55 A 150 mV 18 V 65% VCP05US09 4.8 W 12 V 0.4 A 150 mV 20 V 65% VCP05US12 4.5 W 15 V 0.3 A 150 mV 25 V 65% VCP05US15 Notes 1. Measured at DC output lead using 20 MHz band width and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals 2. Other voltages between 3.0 V and 15.0 V are available, consult sales for details. Models and Ratings Mechanical Details Notes 1. All measurements are in inches (mm). 2. Weight: 20g approx. 0.06 (1.60) 0.18 (4.50) 0.15 (3.80) 0.67 (17.02) ø 0.070 (ø1.80) ø 0.040 (ø1.00) 1.4 (35.5) 0.59 (15) 0.62 (15.8) 2.3 (58.5) 1.15 (29.25) 0.19 (4.8) 0.05 (1.2) 1.01 (25.7) 0.4 (10) 0.99 (25.2) Pin Designation