DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Frequency Range: 5 to 40 MHz
  • OCXO - Fixed Frequency
  • VCOCXO - Voltage Controlled Option
  • 3.3 Vdc or 5.0 Vdc Operation
  • Available Frequency Stabilities:
  • ±5.0 ppb, ±10.0 ppb, ±20 ppb or ±50 ppb
  • Available Temperature Ranges: 0 to 70°C, -20 to 70°C, -20 to 75°C, -40 to 70°C or -40 to 85°C
  • Low Phase Noise / Phase Jitter
  • Output: CMOS Logic or Sinewave
  • Package: 1.0" x 1.0" x 0.500"
  • RoHS Compliant / Lead Free

Ordering Information

Example Part Number: voltage, CMOS square wave output, fixed output frequency OCXO, 10.0 MHz output frequency . voltage, CMOS square wave output, voltage controlled option, VCOCXO, 10.0 MHz output frequency. voltage, Sinewave output, voltage controlled ooption, VCOCXO 10.0 MHz output frequency. Package OH100- = 1.0"x1.0"x0.5" OCXO Through Hole Package Temperature Range 5 = 0 to 70°C 6 = -40 to 85°C 7 = -20 to 70°C 8 = -40 to 70°C 9 = -20 to 75°C Frequency Stability 05 = ±5.0 ppb* 10 = ±10.0 ppb 20 = ±20.0 ppb 50 = ±50.0 ppb Supply Voltage 03 = 3.3 Vdc 05 = 5.0 Vdc Output Type C = CMOS S = Sinewave Output Frequency Frequency Format -xxx.xM Min -xxx.xxxxxxM Max *Amount of numbers after the decimal point. M = MHz OH100- 106 03 C - 010.0M OCXO Type F = Fixed Freq. V = Voltage Controlled Option F Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html * ±5.0 ppb stability models are only available from 0 to 70°C. ** Not all available at Digi-Key

Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches. © Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Operating Specifications Parameter Minimum Nominal Maximum Units Notes Center Frequency: (Fo) 5 - 40 MHz Operating Temperature Range: Temperature Code 5 0 - 70 °C Temperature Code 6 -40 - 85 °C Temperature Code 7 -20 - 70 °C Temperature Code 8 -40 - 70 °C Temperature Code 9 -20 - 75 °C Frequency Calibration: -0.1 - 0.1 ppm @ 25°C Frequency Stability vs. Change in Temperature: Stability Code 05 -5.0 - 5.0 ppb 1, 2 Stability Code 10 -10.0 - 10.0 ppb 2 Stability Code 20 -20.0 - 20.0 ppb 2 Stability Code 50 -50.0 - 50.0 ppb 2 Frequency Stability vs. Load -2.0 - 2.0 ppb ±5% Frequency Stability vs. Voltage -2.0 - 2.0 ppb ±5% Aging: Daily: 5 MHz to 20 MHz -1.0 - 1.0 ppb/day 3 >20 MHz to 40 MHz -2.0 - 2.0 ppb/day 3 Aging: First Year:

5 MHz to 20 MHz -50 - 50 ppb

20 MHz to 40 MHz -100 - 100 ppb Lifetime Tolerance: (20 Years)

5 MHz to 20 MHz- -300 - 300 ppb 4

20 MHz to 40 MHz -500 - 500 ppb 4 Supply Voltage: (Vcc) Voltage Code 03 3.13 3.30 3.47 Vdc 5 Voltage Code 05 4.75 5.00 5.25 Vdc 5 Power Consumption: Turn-On 0 to 70°C Models - - 3.00 W 6 -20 to 70°C Models - - 3.20 W 6 -20 to 75°C Models - - 3.30 W 6 -40 to 85°C Models - - 3.80 W 6 Power Consumption: Steady State @ 25°C 0 to 70°C Models - - 1.10 W 6 -20 to 70°C Models - - 1.15 W 6 -20 to 75°C Models - - 1.20 W 6 -40 to 85°C Models - - 1.50 W 6 Phase Jitter: (BW: 10 Hz to Fo/2) Models Fo: 5 MHz to 20 MHz - - 1.0 ps rms Models Fo: >20 MHz to 40 MHz - - 2.0 ps rms Short Term Allan Deviation (1s) - 1.0E-11 - rms Start-Up Time: - - 500 ms Warm Up Time @ 25°C: - - 5 minutes 7 Notes: 1. ±5.0 ppb stability models are only available from 0 to 70°C. 2. Referenced to the frequency measured @ 25°C. 3. At time of shipment after 48 hours of operation. 4. Inclusive of calibration, operating temperature, supply voltage change, load change and 20 years aging. 5. Supply voltage must reach Vcc levels monotonically within a ramp-up time of <12 ms. 6. Measured with Vcc = Nominal, in calm air. 7. Measured @ 25°C, within ±100 ppb, referenced one hour after turn-on 8. T o ensure proper operation of VCOCXO's the control voltage input must be biased the nominal control voltage. Failure to bias the Vc input will cause an unstable output condition.. Bulletin Cx205 Page 2 of 4 Revision 08 Date 19 Nov 2013 Absolute Ratings: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only. The functional operation of the device at those or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to conditions outside the "recommended operating conditions" for any extended period of time may adversely impact device reliability and result in failures not covered by warranty. Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 °C Supply Voltage -0.5 - 7.0 Vdc Control Voltage (Vc) -0.5 - 7.0 Vdc Operating Supply Voltage 3.3 Vdc (Vcc) 3.13 3.30 3.47 Vdc Operating Supply Voltage 5.0 Vdc (Vcc) 4.75 5.00 5.25 Vdc

Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches. © Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications. Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Environmental Characteristics Shock 500 G’s 1ms, Halfsine, 3 shocks per direction, per MIL-STD 202G, Method 213B Test Condition D. Sinusoidal Vibration 0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202G, Method 204D, Test Condition A. Random Vibration 5.35 G’s rms. 20 to 2000 Hz per MIL-STD-202G, Method 214,T est Condition 1A, 15 minutes each axis. Moisture 10 cycles, 95% RH, Per MIL-STD-202G, Method 112. Marking Permanency Per MIL-STD-202G, Method 215J. Attachment Method PCB Through Hole Mounted Resistance to Solder Heat Per MIL-STD-202G, Method 210, Condition E. Solder Process RoHS compliant, lead free. See solder profile. Package Characteristics Input Characteristics - Voltage Controlled Option (OCXO Type Code V) Parameter Minimum Nominal Maximum Units Notes Control Voltage Range: Frequency Pullability: ±0.4 - - ppm 8 Input Impedance 100K - - Ohms CMOS Output Characteristics (Output Code C) Parameter Minimum Nominal Maximum Units Notes Load - 15 - pF Output Voltage: 3.3 Vdc Models High (Voh) 3.0 - - V Low (Vol) - - 0.4 5.0 Vdc Models High (Voh) 4.7 - - V Low (Vol) - - 0.4 Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time: 10% to 90% - - 6 ns Spurious Output - - -80 dBc Bulletin Cx205 Page 3 of 4 Revision 08 Date 19 Nov 2013 Phase Noise Characteristics Typical Phase Noise for OH100-series with CMOS Output Parameter Units Notes SSB Phase Noise 5 - 12 MHz >12- 20 MHz >20 - 30 MHz >30 - 40 MHz @ 1Hz offset -85 -80 -70 -65 dBc/Hz @ 10Hz offset -115 -110 -100 -95 dBc/Hz @ 100Hz offset -140 -135 -125 -120 dBc/Hz @ 1KHz offset -145 -140 -140 -140 dBc/Hz @ 10KHz offset -150 -150 -150 -150 dBc/Hz @ 100KHz offset -150 -150 -150 -150 dBc/Hz Sinewave Output Characteristics (Output Code S) Parameter Minimum Nominal Maximum Units Notes Load - 50 - Ohms Output Power +5.0 - +10 dBm: Harmonics - - -30 dBc Spurious - - -80 dBc

Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches. © Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications. Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Voltage Control or N/C 15 pF N/C 0.01 uF 10 uF to 100 uF 1232 OH100-61003CF 10.0MHz 123456789012 123456789012 Date Code (YYWW) Model Number Output Frequency Serial # Barcode Serial Number Dimensional Tolerance: ±.005 (.127mm) .500 Max. (12.70mm) Pin Connection 1: Output 2: Ground (Case) 3: Voltage Control or N/C 4: N/C 5: Supply Voltage (Vcc) Package Outline Bulletin Cx205 Page 4 of 4 Revision 08 Date 19 Nov 2013 Solder Profile 120°C 150°C 180°C 260°C 220°C Up to 120 s T ypical 10 s 60 to 90 s T ypical Temperature 260°C Meets IPC/JEDEC J-STD-020C 90% 50% 10% CMOS Output Waveform Package Marking Test Circuit Pin Connections Re-Stabilization Time Off Time Re stabilization Time <1 Hour <2 Hours * <6 Hour <12 Hours * <24 Hour <48 Hours * 1 to 16 Days 48 Hours + 1/4 Off Time * >16 Days <6 Days * * For a given off time, the time required to meet daily aging, short term stability requirements.

Revision History

01 07/27/11 Updated power consumption 02 03/22/12 Added sinewave models 03 08/22/12 Updated marking information 04 09/18/12 Added +10 dB Max to sinewave output characteristics 05 12/07/12 Added application note AN2093 information 06 04/03/13 Added ±5ppb models 07 05/13/13 Changed note 5 and removed note from power supply line, added absolute note 08 11/19/13 Added Voltage Controlled Option Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html Keep Out Area: Under the OCXO is a keep out area, do not place any parts in this area.