V100T000A-680 OSRAM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
1 Version 4.2 | December - 2023 V100T000A-680 BIDOS® Application — Holographic Laser Scope — Proximity Sensor Features: — Package Description: TO-46 Can 4L — Chip Technology: Single Aperture GaAs VCSEL – 6 µm Diameter — Laser Wavelength: 671 nm — Optical Power Class: 1.2 mW — Radiation Profile: 12° FWHM — ESD: 1 kV acc. to ANSI/ESDA/JEDEC JS-001
Ordering Information
Type Operating Mode: Ta = 25°C; IF = 2 mA; DC = 100% Ordering Code V100T000A-680 1.2 mW Q65113A7621 Note: V100T000A-680 is a Vixar legacy qualified product. www.osram-os.com
2 Version 4.2 | December - 2023 Maximum Ratings Ta = 25°C, Iop= 2 mA Parameter Symbol Values Operation/Solder temperature TS min. max. -40°C 60°C Storage temperature Tstg min. max. -40°C 100°C Forward current Direct current operation; DC = 100%; TS = 25°C If max. 4 mA Reverse Voltage Not designed for reverse operation Reflow soldering temperature Not designed for solder reflow ESD withstand voltage (with ESD Diode) acc. to ANSI/ESDA/JEDEC JS-001 VESD max. 1 kV Note: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
3 Version 4.2 | December - 2023 Characteristics Ta = 25°C, IF = 2 mA; Parameter Symbol Values Forward voltage VF typ. 2.3 V Output power Φ min. typ. 0.5 mW 0.8 mW Threshold current Ith typ. max. 0.75 mA 1.00 mA Slope efficiency SE typ. 0.5 W / A Power conversion efficiency η typ. 19 % Peak wavelength λpeak min. typ. max. 660 nm 670 nm 678 nm Spectral bandwidth at FWHM (50% of Φmax) λFWHM max. 1 nm Temperature coefficient of wavelength TCλ typ. 0.045 nm / K Field of view at FWHM (FWHM) Θ typ. max. 12 ° 16 ° Field of view at FWHM (1/e2) Θ typ. 17 ° Note 1: For lasers with only a few primary modes, the RMS spectral width can be estimated as the mode spacing between the lowest and highest primary modes. Higher order modes with more than 10 dB suppression are not included in the RMS spectral width measurement. The spectral characteristics will be verified at a current higher than the typical operating current to provide a guard band under typical operation and as an attempt to meet the spectral specifications (# modes, width, and HMSR) over the full operating temperature with current tuning. Characterization of how the spectral characteristic vary over the operating temperature range with current tuning needs to be studied through testing within the final product application and through qualification testing at Vixar. Vixar cannot guarantee these spectral specifications over the full operational range, but will perform 100% testing to the spectral limits during wafer level testing.
4 Version 4.2 | December - 2023 Relative Spectral Emission 1) Radiation Characteristics 1)
5 Version 4.2 | December - 2023 Forward Voltage 1) 2) Optical Output Power 1) 2) Relative Forward Voltage 1) Relative Radiant Power 1)
6 Version 4.2 | December - 2023 Dimension Drawings 3)
7 Version 4.2 | December - 2023 Method of Delivery Package details: V100T000A-680 is packaged in a hermetically sealed TO-46 can with an ESD diode. V100T000A-680 is delivered in a 170mm X 110mm tray. Refer to image below:
8 Version 4.2 | December - 2023 Barcode-Product-Label (BPL)
9 Version 4.2 | December - 2023 Notes Depending on the mode of operation, these devices emit highly concentrated visible and non-visible light which can be hazardous to the human eye. Products which incorporate these devices must follow the safety precautions given in IEC 60825-1. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duratio n. Respective failure limits are described in the IEC60810. For further application related information please visit www.vixarinc.com/applications/application-notes
10 Version 4.2 | December - 2023 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single produc t, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 2) Testing temperature: TA = 25°C 3) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.
11 Version 4.2 | December - 2023
Revision History
1.0 March – 2017 Initial Draft
2.0 July – 2018 Release in IMSXpress, addition of delivery
method, ordering information, package drawing, VCSEL mechanical specs, update E-O Table
3.0 December - 2019 Addition of Carrier Drawing, Product Image
4.0 Sept - 2020 Updated part number, characteristics table,
temperature graphs, and document layout
4.1 March 31 – 2021 Updated datasheet graphs/layouts
4.2 December 4 – 2023 Update Ordering Code, Product Number
and Barcode-Product-Label (BPL).