V100P000A-680 OSRAM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 13
Technical content
1 Version 1.0 | 2023-03-02 V100P000A-680 BIDOS® Applications: — Biometric Sensor — Low Light Laser Therapy — Industrial Sensors — Pulse Oximetry Features: — Chip Technology: GaAs VCSEL — Laser Wavelength: 680nm — Optical Power Class: 5.5 mW — Radiation Profile: Multi-Mode — ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
Ordering Information
Type Operational Mode: IF = 9 mA, Ta = 25°C DC = 100% Ordering Code V100P000A-680 5.5 mW Q65113A6388 Depending on the mode of operation, these devices emit highly concentrated visible and non -visible light which can be hazardous to the human eye. Products which incorporate these devices must follow the safety precautions given in the “Notes” section. www.osram-os.com
2 Version 1.0 | 2023-03-02 Maximum Ratings Ta = 25°C Parameter Symbol Values Operation/Solder temperature DC = 100 % TS min. max. -20 °C 50 °C Storage temperature Tstg min. max. -40 °C 125 °C Forward current Direct current operation; DC = 100%; TS = 25°C If max. 10 mA Reverse Voltage Not designed for reverse operation Reflow soldering Temperature TRef max. 260 °C ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 1A) VESD max. 2 kV Note: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
3 Version 1.0 | 2023-03-02 Characteristics Ta = 25°C, IF = 9 mA; DC = 100% Parameter Symbol Values Forward voltage VF typ. max. 2.4 V 2.8 V Output power Φ min. typ. 4.5 mW 5.5 mW Threshold current Ith typ. max. 2.5 mA 4.0 mA Slope efficiency SE typ. 0.75 W/A Peak wavelength λpeak min. typ. max. 670 nm 680 nm 690 nm Spectral bandwidth at FWHM (50% of Φmax) λFWHM typ. 2 nm Temperature coefficient of wavelength TCλ typ. 0.045 nm /K Field of view at FWHM (50% of Φmax) φx φY typ. typ. 20° 20°
4 Version 1.0 | 2023-03-02 Relative Spectral Emission 1) Radiation Characteristics 1)
5 Version 1.0 | 2023-03-02 Forward Voltage 1) 2) Optical Output Power 1) 2) Relative Forward Voltage 1) Relative Radiant Power 1)
6 Version 1.0 | 2023-03-02 Max Permissible Current
7 Version 1.0 | 2023-03-02 Dimension Drawings 3) MOISTURE SENSITIVITY CLASSIFICIATION & HANDLING The package should be treated as Moisture Sensitivity Level 5a (MSL 5a) prior to assembly. The shelf life in the sealed bag is 12 months at 5°C-30°C and < 60% R.H. After the package is opened it is recommended to bake before the first use: Baking condition: 1. 60°C ± 5°C for 24-48 hours and <5% R.H. in tape and reel 2. 110°C ±5°C for 8-16 hours in bulk type The devices should be used within a week and to be stored at <20% R.H. with zip lock sealed: 1. Baking is required before soldering when the pack is unsealed after 24 hours 2. Bake conditions as described above.
8 Version 1.0 | 2023-03-02 Taping3) 4) Tape and Reel 4) Pieces per PU 2500
9 Version 1.0 | 2023-03-02 Barcode-Product-Label (BPL) Dry Packing Process and Materials
10 Version 1.0 | 2023-03-02 Notes Depending on the mode of operation, these devices emit highly concentrated visible and non -visible light which can be hazardous to the human eye. Products which incorporate these devices must follow the safety precautions given in IEC 60825-1. Subcomponents of this device contain, in addition to other substances, metal filled materials includin g silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. For further application related information please visit www.osram-os.com/appnotes
11 Version 1.0 | 2023-03-02 Disclaimer OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient including, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e.g. decide at its sole discretion to stop developing and/or finalizing the underlying design at any time. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevan t component or for the application in medical devices. In case Buyer – or Customer supplied by Buyer– considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer.
12 Version 1.0 | 2023-03-02 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 2) Testing temperature: Ta = 25°C 3) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm. 4) Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.
13 Version 1.0 | 2023-03-02