UMC3000-30H-E5-5M PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

< Front of transducer and housing manufactured entirely from stainless steel < Degree of protection IP68 / IP69K < Programmable via DTM with PACTWARE < Mounting bracket MH-30H-01 included in delivery Single head system Function The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. Therefore the sensor is suitable for all applications where a very high tightness is required. Since the sensor housing is made exclusively of V4A stainless steel and all seals are made of highly chemical- resistant materials, this sensor is also predestined for use in chemically aggressive environments. For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used. Dimensions 100 11 3.5 3.5 11 ø 28 ø 30 ø 6.3 Technical Data General specifications Sensing range 200 ... 3000 mm Adjustment range 240 ... 3000 mm Dead band 0 ... 200 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 100 kHz Response delay ≤ 200 ms Indicators/operating means LED green Operating display LED yellow switching state LED red error Electrical specifications Release date: 2021-02--

05 Date of

Release date: 2021-02-05 Date of issue: 2021-02-05 Filename: 70128216_eng.pdf Germany: +49 621 776 1111 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091

Operating voltage UB 10 ... 30 V DC No-load supply current I0 ≤ 50 mA Input/Output Input/output type 1 synchronization connection, bidirectional 0 Level 0 ... 1 V 1 Level 4 V ... UB Input impedance > 12 kΩ Output rated operating current < 12 mA Pulse length ≥ 200 µs Pulse interval ≥ 2 ms Synchronization frequency Common mode operation ≤ 20 Hz Multiplex operation ≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 ) Input Input type 1 program input Level (switch point 1) 0 ... 1 V Level (switch point 2) 4 V ... UB Input impedance > 10 kΩ Pulse length 2 ... 5 s Output Output type 1 switching output E5, PNP NO/NC, programmable Rated operating current Ie 200 mA , short-circuit/overload protected Voltage drop Ud ≤ 2 V Repeat accuracy ≤ 0.1 % of full-scale value Switching frequency f ≤ 2.8 Hz Range hysteresis H programmable , preset to 1 mm Temperature influence < 1.5 % of full-scale value Compliance with standards and directives Standard conformity Standards EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 Approvals and certificates CCC approval CCC approval / marking not required for products rated ≤36 V Ambient conditions Mechanical specifications Connection type cable PUR , 5 m Core cross-section 5 x 0.5 mm2 Degree of protection IP68 / IP69K Material Housing stainless steel 1.4404 / AISI 316L LED window: VMQ Elastosil LR 3003/Shore 50 A Transducer Stainless steel 1.4435 / AISI 316L Mass 425 g Factory settings Output near switch point: 240 mm far switch point: 3000 mm output function: Window mode output behavior: NO contact General information Supplementary information Switch settings of the external programming adapter: "output load": pull-down "output logic": inv Ultrasonic sensor UMC3000-30H-E5-5M Release date: 2021-02-05 Date of issue: 2021-02-05 Filename: 70128216_eng.pdf Germany: +49 621 776 1111 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091

X Y Characteristic response curve Distance X [m] Distance Y [m] flat surface 100 mm x 100 mm round bar, Ø 25 mm 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 0 1 2 3 4 5 Programming Switching output modes 1. Window mode, normally open A1 < A2: 2. Window mode, normally closed A2 < A1: 3. One switch point, normally open A1 -> /g102/g29 5. A1 -> /g102, A2 -> /g102: Object presence detection mode Object detected: Switch output closed No object detected: Switch output open 4. One switch point, normally closed A2 -> /g102: object distance A1 A2 A2 A1 Accessories UC-PROG1-USB Programming adapter V15S-G-0,3M-PUR- WAGO Male cordset, M12, 5-pin, PUR cable with WAGO terminals MH-30H-01 Mounting aid, 30 mm Ultrasonic sensor UMC3000-30H-E5-5M Release date: 2021-02-05 Date of issue: 2021-02-05 Filename: 70128216_eng.pdf Germany: +49 621 776 1111 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091

Release date: 2021-02-05 Date of issue: 2021-02-05 Filename: 70128216_eng.pdf UMC3000-30H-E5-5M Germany: +49 621 776 1111Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 Ultrasonic sensor Mounting instructions Adjustment possibilities The sensor is equipped with 1 switching output with 2 programmable switch points. The programming of the switch points and the of output behavior can be done in two different ways:

  • Using the teach input of the sensor
  • Using the sensor ‘s serial interface. This method requires an external programming adapter and the corresponding software. You will find the download link for the software at www.pepperl-fuchs.com on the product page of the sensor. Synchronisation The sensor features a synchronization input for suppressing ultrasonic mutual interference ("crosstalk“). The following synchronization modes are available: 1. Automatic multiplex mode 2. Automatic master slave common mode 3. Externally controlled synchronization Further Documentation For information on programming and synchronisation you may refer to the commissioning instruction. Mounting Comply with the minimum permissible bending radius of 70 mm, if you install the connecting cable! The mounting accessories included with the sensor must be used in order to ensure reliable operation! Commissioning