UGB10ACT GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ULTRAFAST SOFT RECOVERY RECTIFIER Reverse Voltage -50 to 200 Volts Forward Current -10.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Ideally suited for free wheeling diode power factor correction applications ♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Optimized to reduce switching losses ♦ High temperature soldering in accordance with CECC 802 / Reflow guaranteed ♦ Glass passivated chip junction MECHANICAL DATA Case: JEDEC TO-263AB molded plastic body Terminals:Plated leads, solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Mounting Torque:5 in. - lbs. max. Weight:0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS UGB10ACT UGB10BCT UGB10CCT UGB10DCT UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 Volts Working peak reverse voltage V RWM 50 100 150 200 Volts Maximum RMS voltage V RMS 35 70 105 140 Volts Maximum DC blocking voltage V DC 50 100 150 200 Volts Maximum average forward rectified current at TC =100°C I (AV) 10 Amps Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 60 Amps on rated load (JEDEC Method) per leg Maximum instantaneous forward voltage per leg at IF=10A, T J=25°C 1.25 IF=5A, T J=25°C V F 1.10 Volts IF=5A, T J=150°C 0.895 Maximum reverse leakage current per leg T J=25°C 10 at working peak reverse voltage T J=100°C IR 200 µA Maximum reverse recovery time per leg at IF=1.0A, di/dt=100A/µs, VR =30V, Irr=0.1 IRM trr 25 ns Maximum reverse recovery time per leg at Maximum 25 IF=0.5A, IR =1.0A, Irr=0.25A Typical trr 15 ns Maximum reverse recovery current per leg at IF=5A, di/dt=50A/µs,VR =30V IRM 0.7 Amps Maximum stored charge per leg Maximum 5.5 IF=2A, di/dt=20A/µs, VR =30V Irr=0.1 IRM Typical Q rr 4.5 nC Typical thermal resistance from junction to case per leg R Θ JC 4.5 °C/W Operating junction and storage temperature range T J, TSTG -40 to +150 °C Dimensions in inches and (millimeters) NEW PRODUCT NEW PRODUCT NEW PRODUCT -T-SEATING PLATE 0.380 (9.65) 0.420 (10.67) 0.320 (8.13) 0.625 (15.88) 0.027 (0.686) 0.037 (0.940) 1 2 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.018 (0.46) 0.025 (0.64) 0.080 (2.03) 0.110 (2.79) 0.090 (2.29) 0.110 (2.79) 0.245 (6.22) MIN - HEATSINK PIN 1 K K 0.095 (2.41) 0.100 (2.54) K PIN 2 0.047 (1.19) 0.055 (1.40) TO-263AB

0.01 0.1 100 25 50 75 100 125 0.1 1 10 100 100 20 40 60 80 100 0.1 100 1,000 FIG. 1 -FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE @2A, 20A/µs @5A, 50A/µs @1A, 100A/µs @5A, 50A/µs @1A, 100A/µs @2A, 20A/µs trr Q rr FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) T C =105°C FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT, AMPERES REVERSE VOLTAGE, VOLTSJUNCTION TEMPERATURE, °C TJ=125°C f=1.0 MHz Vsig=50MVp-p NUMBER OF CYCLES AT 60 H Z INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEGFIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG CAPACITANCE, pF STORED CHARGE/REVERSE RECOVERY TIME, nC/ns RESISTIVE OR INDUCTIVE LOAD TJ=125°C TJ=125°C TJ=100°C TJ=100°C TJ=25°C TJ=25°C RATINGS AND CHARACTERISTIC CURVES UGB10ACT THRU UGB10DCT