UG10ACT GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ULTRAFAST SOFT RECOVERY RECTIFIER Reverse Voltage -200 Volts Forward Current -10.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Ideally suited for free wheeling diode power factor correction applications ♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Optimized to reduce switching losses ♦ High temperature soldering guaranteed: 250°C/10 seconds at terminals ♦ Glass passivated chip junction MECHANICAL DATA Case: JEDEC TO-220AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Mounting Torque:5 in. - lbs. max. Weight:0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS UG10ACT UG10BCT UG10CCT UG10DCT UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 Volts Working peak reverse voltage V RWM 50 100 150 200 Volts Maximum RMS voltage V RMS 35 70 105 140 Volts Maximum DC blocking voltage V DC 50 100 150 200 Volts Maximum average forward rectified current at TC =100°C I (AV) 10 Amps Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 60 Amps on rated load (JEDEC Method) per leg Maximum instantaneous forward voltage per leg at IF=10A, T J=25°C 1.25 IF=5A, T J=25°C V F 1.10 Volts IF=5A, T J=150°C 0.895 Maximum reverse leakage current per leg T J=25°C 10 at working peak reverse voltage T J=100°C IR 200 µA Maximum reverse recovery time per leg at IF=1.0A, di/dt=100A/µs, VR =30V, Irr=0.1 IRM trr 25 ns Maximum reverse recovery time per leg at Maximum 25 IF=0.5A, IR =1.0A, Irr=0.25A Typical trr 15 ns Maximum reverse recovery current per leg at IF=5A, di/dt=50A/µs,VR =30V IRM 0.7 Amps Maximum stored charge per leg Maximum 5.5 IF=2A, di/dt=20A/µs, VR =30V Irr=0.1 IRM Typical Q rr 4.5 nC Typical thermal resistance from junction to case per leg R Θ JC 4.5 °C/W Operating junction and storage temperature range T J, TSTG -40 to +150 °C NOTICE: Advanced product information is subject to change without notice TO-220AB Dimensions in inches and (millimeters) NEW PRODUCT NEW PRODUCT NEW PRODUCT 0.415 (10.54) MAX. 0.154 (3.91) 0.148 (3.74)DIA. 0.113 (2.87) 0.103 (2.62) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 0.160 (4.06) 0.140 (3.56) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) 0.110 (2.79) 0.100 (2.54) PIN 1 2 3 PIN 1 PIN 3 CASE 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.410 (10.41) 0.390 (9.91) 0.105 (2.67) 0.095 (2.41) 0.635 (16.13) 0.625 (15.87) 0.560 (14.22) 0.530 (13.46) PIN 2 0.370 (9.40) 0.360 (9.14)

0.01 0.1 100 25 50 75 100 125 0.1 1 10 100 100 20 40 60 80 100 0.1 100 1,000 FIG. 1 -FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE @2A, 20A/µs @5A, 50A/µs @1A, 100A/µs @5A, 50A/µs @1A, 100A/µs @2A, 20A/µs trr Q rr FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) T C =105°C FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT, AMPERES REVERSE VOLTAGE, VOLTSJUNCTION TEMPERATURE, °C TJ=125°C f=1.0 MHz Vsig=50MVp-p NUMBER OF CYCLES AT 60 H Z INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEGFIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG CAPACITANCE, pF STORED CHARGE/REVERSE RECOVERY TIME, nC/ns RESISTIVE OR INDUCTIVE LOAD RATINGS AND CHARACTERISTIC CURVES UG10ACT THRU UG10DCT TJ=125°C TJ=125°C TJ=100°C TJ=100°C TJ=25°C TJ=25°C