U17-215-R6C-AQ1R2B-3T EVERLIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS complaint version Descriptions ․The 17-215 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material Emitted Color Lens Color 17-215/R6C-AQ1R2B/3T AlGaInP Brilliant Red Water Clear
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 60 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 72 ----- 180 mcd Viewing Angle 2θ1/2 ----- 130 ----- deg Peak Wavelength λB p Dominant Wavelength λB d Spectrum Radiation Bandwidth △λ ----- 20 ----- nm Forward Voltage VB F B 1.75 ----- 2.35 V IB F B=20mA Reverse Current I B R Notes: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3.Tolerance of Forward Voltage ±0.1V
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Bin Range Of Dom. Wavelength Group Bin Min Max Unit Condition E4 617.5 621.5 E5 621.5 625.5 E6 625.5 629.5 A E7 629.5 633.5 nm I B F B =20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition Q1 72 90 Q2 90 112 R1 112 140 R2 140 180 mcd I B F B =20mA Bin Range Of Forward Voltage Group Bin Min Max Unit Condition 0 1.75 1.95 1 1.95 2.15 B 2 2.15 2.35 V I B F B=20mA Notes: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3.Tolerance of Forward Voltage ±0.1V
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Devi ce No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Typical Electro-Optical Characteristics Curves
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng xxxxxx xxxxxx xxxxxxxxxxxx xxxx xxxxxxxx RoHS Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85% RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30
℃ or less and 90%RH or less. 2.3After opening the package, the LEDs should be kept at 30℃ or less and60%RH or less(Floor life). However,it’s recommended that The LEDs should be used within 168 hours (7 days) after opening the package.If unused LED remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. Soldering Condition 3 . 1 P b - f r e e s o l d e r t e m p e r a t u r e p r o f i l e 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R6C-AQ1R2B/3T Device No. :SZDSE-175-R05 Prepared date:14-Apr-2006 Prepared by: Gu Zhicheng 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com