R6SGHB7C-A02 EVERLIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

․Super-luminosity chip LED. ․White SMT package. ․Built in Red, Green, and Blue chips. ․Lead frame package with individual 6 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․Due to the package design, 93-23 has low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application.

Applications

․Amusement equipment. ․Information boards. ․Flashlight for digital camera of cellular phone. Device Selection Guide Chip Type Material Emitted Color Lens Color R6S AlGaInP Brilliant Red GH InGaN Brilliant Green B7 InGaN Blue Water Clear

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Package Outline Dimensions Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are ±0.1mm. 1.85 3.0 0.5 3.5 0.3 0.8 2.7 4.5 1.1 1.7 1.85 2.95 3.0 Cathode Mark 3.5 2.7 3.0 3.5 4 62 2.7 3 51 RG B

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V R6S 50 GH 25 Forward Current I F B7 30 mA R6S 100 GH 100 Peak Forward Current (Duty 1/10 @ 1KHZ)I FP B7 100 mA R6S 120 GH 110 Power Dissipation Pd B7 110 mW R6S 2000 GH 150 Electrostatic Discharge(HBM) ESD B7 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition R6S 180 265 ----- I F=20mA GH 715 1010 ----- I F=20mA Luminous Intensity Iv B7 140 240 ----- mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg I F=20mA GH ----- 518 ----- Peak Wavelength λp B7 ----- 468 ----- nm I F=20mA GH ----- 525 ----- Dominant Wavelength λd B7 ----- 470 ----- nm I F=20mA R6S ----- 20 ----- GH ----- 35 ----- Spectrum Radiation Bandwidth △λ B7 ----- 35 ----- nm I F=20mA R6S ----- 2.0 2.4 GH ----- 3.3 3.7 Forward Voltage VF B7 ----- 3.3 3.7 V I F=20mA R6S ----- ----- 10 GH ----- ----- 50 Reverse Current IR B7 ----- ----- 50 μA VR=5V

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Red)

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Green)

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Blue)

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 9 3 - 2 3 / R 6 S G H B 7 C - A 0 2 / 2 T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life I F = 20 mA

1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 120 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 260 °C Max 1~5 °C / Sec. 10 Sec. Max.

EVERLIGHT ELECTRONICS CO.,LTD. Device No.: Prepared date: 5-Sep-2006 Prepared by: Ya_Hui Fang 93-23/R6SGHB7C-A02/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com