TX7301 TANDAUK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Intelligent Sounder and Strobe Features and Benefits
- EN54-3 Compliance
- Built-in MCU processor and digital addressing
- 17 tones Programmable sound output
- Programmable types such as Sound- er-Strobe, Sounder or Strobe alone
- Programmable Evacuate or Pre-alarm/Evacuate signal
- Low and normal consumption mode
- One or Two addresses mode
- 10 Highlights LED status cluster
- Onsite Adjustable Parameters
- Loop or external power input
- Aesthetically pleasing design
- Universal mounting with fix base for simple installation Overview The TX7301 Intelligent Sounder Strobe is alarm warning device used to notify persons in the vicinity of the occurrence fire emergency in order the person to take appropriate measures. The unit adopt multi-application device starting from the types, parameters and wiring layout in single unit. The TX7301 can change into different alarm warning types such as sounder-strobe type, sounder type or strobe type using programming tool. In addition, parameters can be configured according to the requirement which include alarm tone from 17 different tones, single address or dual address mode and also setting of power mode to low current consumption in a simple programming. The unit manufactured base on the requirement of EN 54 part 3, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid Intelligent communication compatibility problem.
Colour ABS / RED Glossy finishing
10 Highlights LED
L:152.5 x W:88.5 x H:46.75 mm (without base) -10°C to +50°C IP21 0 to 95% Relative Humidity, Non condensing Weight 184g (with Base), 124g (Without Base) Class Humidity Type A, Indoors Compliance EN54-3 Power Rating Loop Power: 24VDC [18V to 27.5V] External PSU Loop and External PSU Saving Current 24 VDC [20V to 27.5V] Standby 0.6mA, Alarm: 17mA Standby 1.2mA, Alarm: 9mA Typical Current Loop: Standby 0.7mA, Alarm: 1.5mA Input Voltage Sounder Strobe 102 dBA at 1 meter
17 Tones (refers to Manual)
T&A, Value range from 1 to 254, dual address1st Alert / 2nd Evac Sounder level Pressure Tone Protocol/ Addressing Technical Specification Module and Wiring Details Loop Powered Wiring Details With External Supply Wiring Details Z1 Signal In (+) Z1 Signal Out (+) Z2 Signal In (-) Z2 Signal Out (-) D1 External PSU In (+) Optional D1 External PSU Out (+)Optional D2 External PSU In(-)Optional D2 External PSU Out (-)Optional Terminal Description