TV602-019.2M

TV504-019.2M CONNOR-WINFIELD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Bulletin Tx215 Page 1o f4 Revision 01 Date 25 Aug 2008 21 11 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221

Description

Standard Frequencies Available * Ta b l e 1 . 0 Features: Pad Connections

Ordering Information

19.44 MHz 20.0 MHz 20.48 MHz

12.8 MHz

13.5 MHz 25 MHz 27 MHz 38.88 MHz * Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available. Telecom Performance TCXO / VCTCXO

Applications

5.0x7.0mm Temperature Compensated Crystal Controlled Oscillators and Voltage Controlled Temperature Compensated Crystal Controlled Oscillators are designed for use in S3 Telecom Applications. Through the use of Analog Temperature Compensation, this device is capable of holding sub 1-ppm stabilities over the commercial or the industrial temperature ranges. All models meet +/-4.6ppm accuracies for twenty years. Miniature 5.0 x7.0mm Surface Mount Package 3.3V Operation LVCMOS or Clipped Sinewave Output Logic Frequency Stabilities Available: TV50x / TV60x: +/-0.28ppm T 51x / T 61x: 0.50ppm T 52x / T 62x: 1.00ppm Temperature Ranges Available: TV5xx Series: 0 to 70°C TV6xx Series: -40 to 85°C Frequency Tolerance: +/-4.60ppm for 20 yrs. Low Jitter <1pS RMS Tape and Reel Packaging RoHS Compliant / Lead Free Recommended for New Designs Matches Vectron’s VTC1-Series Footprint V V +/- V V +/- Type: Precision TCXO VCTCXO 5x7mm

4 Pads

Features: 2 = TCXO, LVCMOS, 3.3Vdc. 4=V C 5=V C TCXO, Clipped Sinewave, 3.3Vdc. TCXO, LVCMOS, 3.3Vdc. TCXO, Clipped Sinewave, 3.3Vdc. Temperature Range: 5=0t o 6 = -40 to 85 70° C Frequency Stability: 0 = +/-0.28 1 = +/- 2 = +/- ppm 0.50 ppm 1.00 ppm TV 5 0 019.2M- Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHzExample: TV504-019.2M = 5x7mm, TCXO, LVCMOS, 3.3Vdc, 0 to 70C, +/-0.28ppm, Output Frequency 19.2MHz To order an TV504 with an output frequency of: 6.4 MHz = TV504-006.4M 20 MHz = TV504-020.0M 38.88 MHz = TV504-038.88M TV504 0808 19.2MHZ

1 Control Voltage or N/C

2 Ground

3 Output

4 Supply Voltage (Vcc)

Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) 0.276 0.006 (7.0mm) 0.197 0.006 (5.0mm) 0.079 Max. (2.0mm) 0.03 (0. mm) (4 Places) 0.0 ( mm) 1.40 (4 Places) Pad 1 1 2 (Bottom View) (Top View) TV504 0808 19.2MHZ

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com TCXO VCTCXO 3.3V Operation LVCMOS Output Clipped Sinewave Output Frequency Stability: TV50x/TV60xSeries+/-0.28ppm TV51x/TV61x-Series+/-0.50ppm TV52x/TV62x-Series+/-1.00ppm T emperature Range: TV5xx-Series 0 to 70°C TV6xx-Series -40 to 85°C Low Jitter <1pS RMS Surface Mount Package T ape and Reel Packing RoHS Compliant / Lead Free Recommended for New Designs Matches Vectron’s VTC1-Series Footprint Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation LVCMOS Test Circuit

Features

Ta b l e 2 . 0 Parameter Minimum Nominal Maximum Units Notes Storage T emperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 6.0 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.6 Vdc Model Specifications US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Tx215 2o f4

25 Aug 2008

19.2MHZ Clipped Sinewave Test Circuit 1 2 N/C - TCXO VC- VCTCXO DNC DNC DNC DNC DNC Output 15 pF Vcc Supply Voltage.01 uF Bypass DNC 10 pF10Kohm 1 2 N/C - TCXO VC- VCTCXO DNC DNC DNC DNC DNC OutputVcc Supply Voltage.01 uF Bypass DNC Table 3.0 Model Number TV502 TV503 TV504 TV505 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.28ppm 1 Supply Voltage 3.3Vdc Temperature Range 0 to 70°C Holdover Stability ±0.32ppm 2 Table 4.0 Model Number TV602 TV603 TV604 TV605 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.28ppm 1 Supply Voltage 3.3Vdc Temperature Range -40 to 85°C Holdover Stability ±0.32ppm 2 Table 5.0 Model Number TV512 TV513 TV514 TV515 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.50ppm 1 Supply Voltage 3.3Vdc Temperature Range 0 to 70°C Table 6.0 Model Number TV612 TV613 TV614 TV615 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.50ppm 1 Supply Voltage 3.3Vdc Temperature Range -40 to 85°C Table 7.0 Model Number TV522 TV523 TV524 TV525 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO F r e q u e n c yR a n g e 6 . 4t o5 2M H z Frequency Stability ±1.00ppm 1 Supply Voltage 3.3Vdc Temperature Range 0 to 70°C Table 8.0 Model Number TV622 TV623 TV624 TV625 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO F r e q u e n c yR a n g e 6 . 4t o5 2M H z Frequency Stability ±1.00ppm 1 Supply Voltage 3.3Vdc Temperature Range -40 to 85°C Notes: 1) Frequency stability vs. change in temperature. [±(Fmax – Fmin)/2.Fo]. 2) Inclusive of frequency stability, supply voltage change (±1%), aging, for 24 hours.

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Electrical Specifications for all Models Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Tx215 3o f4 19.2MHZ Clipped Sinewave Test Circuit 1 2 N/C - TCXO VC- VCTCXO DNC DNC DNC DNC DNC Output 15 pF Vcc Supply Voltage.01 uF Bypass DNC 10 pF10Kohm 1 2 N/C - TCXO VC- VCTCXO DNC DNC DNC DNC DNC OutputVcc Supply Voltage.01 uF Bypass DNC TCXO VCTCXO 3.3V Operation LVCMOS Output Clipped Sinewave Output Frequency Stability: TV50x/TV60xSeries+/-0.28ppm TV51x/TV61x-Series+/-0.50ppm TV52x/TV62x-Series+/-1.00ppm T emperature Range: TV5xx-Series 0 to 70°C TV6xx-Series -40 to 85°C Low Jitter <1pS RMS Surface Mount Package T ape and Reel Packing RoHS Compliant / Lead Free Recommended for New Designs Matches Vectron’s VTC1-Series Footprint Notes: 1) TCXO: Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of operation. 2) Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C. 3) Inclusive of calibration @ 25 C, frequency vs. change in temperature, change in supply voltage (±5%), load change (±5%), reflow soldering process and 20 years aging. 4) For best in application performance, careful selection of an external power source is critical. Select an external regulator that meets or exceeds to following specifications regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage noise, and low voltage noise density. Factory Test Conditions:Initial Accuracy ±2mv, Noise (0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nV/? Hz, Temperature Coefficient < 5ppmºC. 5) Additional pull ranges are available; please contact the factory for additional information. 6) Output is AC coupled. Operating Specifications Table 9.0 Parameter Minimum Nominal Maximum Units Notes TCXO Frequency Calibration @ 25 C -1.00 - 1.00 ppm 1 Supply Voltage Variation. (Vcc±5%) -0.2 - 0.2 ppm Load Coefficient, ±5pF -0.2 - 0.2 ppm Static Temperature Hysteresis -0.4 - 0.4 ppm 2 Total Frequency Tolerance -4.60 - 4.60 ppm 3 Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc 4 Supply Current (Icc) - 6 10 mA Period Jitter - 3 5 ps rms Integrated Phase Jitter (BW=12kHz to 20MHz) - 0.3 1.0 ps rms SSB Phase Noise at 10Hz offset - -80 -70 dBc/Hz SSB Phase Noise at 100Hz offset - -110 -100 dBc/Hz SSB Phase Noise at 1KHz offset - -135 -130 dBc/Hz SSB Phase Noise at >10KHz offset - -150 -145 dBc/Hz SSB Phase Noise at >100KHz offset - -150 -150 dBc/Hz Start Up Time - - 10 ms Input Characteristics For Voltage Control (Pad 1) Table 10.0 Parameter Minimum Nominal Maximum Units Notes Control Voltage Range (Vcc = 3.3V) (Vc) 0.3 1.65 3.0 Vdc Frequency Tuning ±10 - - ppm 5 Linearity ±5 - - % Slope Positive LVCMOS Output Characteristics Table 11.0 Parameter Minimum Nominal Maximum Units Notes LOAD - - 15 pF Voltage (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Current (High) (Ioh) -4 - - mA (Low) (Iol) - - 4 mA D u t y C y c l e a t 5 0 % o f V c c 4 55 05 5% Rise / Fall Time 10% to 90% - - 8 ns Clipped Sinewave Output Characteristics Table 12.0 Parameter Minimum Nominal Maximum Units Notes Load - - 6 Output Load Resistance - 10K - Ohms Output Load Capacitance - 10 - pF Output Voltage (< 40 MHz) 1.00 - - V pk-pk Output Voltage (> 40 MHz) 0.80 - - V pk-pk

Table 13.0 Package Ceramic Surface Mount Package. Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C 90% 50% 10% 200 mV/Div Design Recommendations OSC TOP LAYER GROUND LAYER BOTTOM LAYER Output Buffer

50 Ohm Trace

Model TV504-019.2MHz Typical Phase Noise Solder Profile LVCMOS Output Waveform Clipped Sinewave Output Waveform Package Characteristics Environmental Characteristics Table 14.0 Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering: SMD product suitable for Convection Reflow soldering. Peak temperature 260 C. Maximum time above 220 C, 60 seconds. Solderability Solderability per Mil Std 883E Method 2003 Suggested Pad Layout Buffer Ground <1”by design Vcc Ground Top View Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Tx215 4o f4 (Top View) 1 2 0.69 (17.53mm) 0.08 (2.0mm) 0.08 (2.0mm) 3.15 (80mm) 9.84 (250mm) 0.08 (2.0mm) 8.45 Dia. (214.6mm) 1.0 Dia. (25.4mm) 4-PAD Ceramic Package Standard Orientation Tape and Reel Specifications Meets EIA-481A and EIJ-1009B 2000 Pieces/Reel Maximum. Direction of Feed (Customer) 0.157 (4mm) 0.079 (2mm) 0.020 R. (0.5mm) 0.63 (1.6mm) Dia. 0.059 (1.5mm) Dia. 0.069 (1.75mm) 0.295 0.626 (15.90mm) 0.059 (1.5mm) Dia. Minimum Pocket Size (Ao) (Bo) (Ko) 5.33mm (0.21”) 7.87mm (0.31”) 3.07mm (0.121”) 16mm (0.630”) Width 8mm (0.315”) Pitch Typical 0.210 (5.33mm) (Ao) 0.121 (3.07mm) (Ko) 0.315 (8.0mm) Typical 0.31 (7.87mm) (Bo) 0.014 (+/-.004) (0.36mm +/-.01) SM-MECH09 0.010”(0.254mm) Recommended clearance inductance for internal copper flood. 1 3 1 2 Vcc, should have a large copper area for reduced inductance. Connect a 0.01uF bypass capacitor <0.1”(2.54mm) from the pad. Ground, should have a large copper area for reduced inductance. Top View