TSOT23-5 ZETEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Issue 3 - March 2007 1 www.zetex.com © Zetex Semiconductors plc 2007 Surface mounted, 5 pin package Package outline Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Tape and reel information DIM Millimeters Inches Min. Max. Min. Max. A - 1.00 - 0.0393 A1 0.01 0.10 0.0003 0.0039 A2 0.84 0.90 0.0330 0.0354 b 0.30 0.45 0.0118 0.0177 c 0.12 0.20 0.0047 0.0078 D 2.90 BSC 0.114 BSC E 2.80 BSC 0.110 BSC E1 1.60 BSC 0.062 BSC e 0.95 BSC 0.0374 BSC e1 1.90 BSC 0.0748 BSC L 0.30 0.50 0.0118 0.0196 L2 0.25 BSC 0.010 BSC a° 4° 12° 4° 12° Orientation Tape width (mm) Reel size (inches) No. of components Tape option indicator 8 7 3,000 TA 8 13 10,000 TC
Issue 3 - March 2007 2 www.zetex.com © Zetex Semiconductors plc 2007 Nominal weight Nominal weight per device 12mg. Embossed carrier tape configuration Dimensions mm (inches) Tape size (mm) 8 1 21 62 4 A0, B0, K0 See note* NOTES: * A0, B0 and K0 dimensions are determined with respect to EIA/JEDEC rotational and lateral movement requirements (see fig. 1). See note* See note* See note* F 3.50 ± 0.10 (0.138 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 7.50 ± 0.10 (0.295 ± 0.004) 11.50 ± 0.10 (0.453 ± 0.004) P 4.00 ±0.10 (0.157 ± 0.004) 4.00 ±0.10 (0.157 ± 0.004) 8.00 ±0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 8.00 ±0.10 (0.315 ± 0.004) 12.00 ± 0.10 (0.472 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) to 20.00 ± 0.10 (0.787 ± 0.004) in 4.00 (0.157) increments (0.472 ± 0.012) DK t P Center lines of cavity 10 pitches culmulative tolerance on tape ±0.2mm (±0.008”) User direction of feed Embossment Top cover tape K0B1 See Note 1 See Note 1 See Note 1 WF E
Issue 3 - March 2007 3 www.zetex.com © Zetex Semiconductors plc 2007 This publication is issued to provide outline information only whic h (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned. The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. Figure 1 - rotational and lateral movement Reel configuration Tape option A max. B min. C D min. N min. (0.512 - 0.52) Tape size G T max. 20° maximum 0.5mm maximum 0.5mm maximum Sketch A (top view) Component lateral movement Component cavity center line 20° maximum Component center line Sketch C (top view) Component rotation - top view Sketch B (side or front sectional view) Component rotation - side view Full radius Tape slot in core for tape start. 2.5mm min. width, 10mm min. depth G T N CDA B