TRB140 TELTONIKA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) Static routing Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Port forwards, traffic rules, custom rules Static and dynamic IP allocation Traffic priority queuing by source/destination, service, protocol or port Supported >25 service providers, others can be configured manually Status SMS/Call MOBILE Mobile module 1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossoverLAN ETHERNET Supports sending and reading Unstructured Supplementary Service Data messagesUSSD Operator black/white listBlack/White list Band lock, Used band status displayBand management Auto APNAPN Direct connection (bridge) between mobile ISP and device on LANBridge Gateway assigns its mobile WAN IP address to another device on LANPassthrough Possibility to use different PDNs for multiple network access and servicesMultiple PDN Firewall Routing Connection monitoring NETWORK Network protocols Pre-shared key, digital certificates, X.509 certificates Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) Firewall Attack prevention SECURITY Authentication Set up custom data limits for SIM cardMobile quota control Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyWEB filter Flexible access control of TCP, UDP, ICMP packets, MAC address filterAccess control DHCP QoS / Smart Queue Management (SQM) (planned) DDNS Possibility to mount remote file system via SSH protocolSSHFS DATASHEET // TRB140 Multiple clients and a server can run simultaneously, 12 encryption methods DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCOpenVPN Encryption VPN OpenVPN IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) GRE tunnel IPsec GRE Client/Server services can run simultaneously, L2TPv3 supportPPTP, L2TP ZeroTier VPNZeroTier WireGuard VPN client and server supportWireGuard

FEATURES

Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Firmware update from sever, automatic notificationFOTA HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log MONITORING & MANAGEMENT WEB UI SSH (v1, v2) SMS status, SMS configuration, send/read SMS via HTTP POST/GET SSH SMS Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem Call TR-069 MQTT Broker, MQTT publisher SNMP (v1, v2, v3), SNMP trap MQTT SNMP Management API over HTTP/HTTPS MODBUS TCP status/control JSON-RPC MODBUS Teltonika Remote Management System (RMS)RMS SYSTEM CHARACTERISTICS ARM Cortex-A7 1.2 GHz CPUCPU

128 MB (50 MB available for userspace)

512 MB (200 MB available for userspace)

RutOS (OpenWrt based Linux OS)Operating system Busybox shell, Lua, C, C++ SDK package with build environment provided Supported languages Development tools MODBUS TCP SLAVE MODBUS TCP MASTER Respond to one ID in range [1;255] or anyID filtering Allow access through WAN MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality Allow remote access Custom registers 01, 02, 03, 04, 05, 06, 15, 16 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII Supported functions MQTT GATEWAY Allows sending commands and receiving data from MODBUS Master trough MQTT brokerGateway DATA TO SERVER HTTP(S), MQTT, Azure MQTT, KinesisProtocol Supported data formats FIRMWARE / CONFIGURATION Update FW from file, check FW on server, configuration profiles, configuration backupWEB UI Update FW/configuration from server Update FW/configuration for multiple devices FOTA RMS Update FW without losing current configurationKeep settings IoT PLATFORMS Allows monitoring of: Device data, Mobile data, Network info, AvailabilityCloud of Things Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP ThingWorx Cumulocity Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server Azure IoT Hub Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

4 pin industrial DC power socketConnector 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards Input voltage range PoE (passive) < 5 WPower consumption PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM) 1 x RJ45 port, 10/100/1000 MbpsEthernet 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB140*2****) 1 x Virtual network interface via micro USB I/Os USB 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LEDStatus LEDs 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V 1 x 4 pin DC connector SIM Power 1 x SMA for LTEAnntena Reboot/User default reset/Factory reset buttonReset EMI RF SAFETY IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017 Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. Standards EN 61000-4-2:2009 EN 61000-4-3:2006 + A1:2008 + A2:2010 ESD RS EN 61000-4-4:2012EFT EN 61000-4-5:2014 EN 61000-4-6:2014 Surge protection CS EN 61000-4-11:2004DIP INPUT/OUTPUT 2 x Configurable Inputs/Outputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA (not available in TRB140*2****)Configurable I/O HTTP POST/GET, ScheduleOutput control SMS, EMAILEvents Allows to set certain I/O conditions to initiate eventI/O juggler DATASHEET // TRB140 PHYSICAL SPECIFICATION Aluminum housing 74.5 x 25 x 64.4 mm Casing material Dimensions (W x H x D) 134 g -40 °C to 75 °C 10 % to 90 % non-condensing IP30 Bottom and sideways DIN rail, Flat surface Weight Mounting options OPERATING ENVIRONMENT Operating temperature CE/RED, EAC, RoHS, WEEE REGULATORY & TYPE APPROVALS Regulatory Operating humidity Ingress Protection Rating

A. B. admin admin01 Bytes received/sent* SIM card slot in use Data connection state State LOGIN TO DEVICE 1. Power on the device and connect the USB cable to your computer. 2. Allow the gateway to boot up. This might take up to 30 seconds. 3. Your computer's OS should detect the USB device and install the driver. 5. Use login information shown in image A when prompted for authentication. 6. After logging in pay attention to the Signal Strength indication displayed in the Mobile widget (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions. HARDWARE INSTALLATION *Order code dependent. **Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations. Bundled accessories specifications* Radio specifications RF technologies Max RF power 2G, 3G, 4G 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE Mobile antenna 698~960/1710~2690 MHz, 50 Ω, VSWR<2, gain** 2 dBi, omnidirectional, SMA male connector Power adapter Input: 0.4A@100-240VAC, Output: 9VDC, 0.5A, 4-pin plug TECHNICAL INFORMATION -65 dBm Connected Registered (home); OPERATOR; 4G (LTE) Ready 348.7 KB / 223.5 KB 1. Unscrew two back panel hex bolts and remove the back panel. 2. Insert your SIM card into the SIM socket. 3. Attach the panel and tighten the hex bolts. 4. Attach the mobile antenna (max torque 0.4 N·m / 3.5 lbf·in) and connect the USB cable. Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

STANDARD PACKAGE CONTAINS* TRB140 4.5 W PSU MICRO-USB CABLE (0.8 M) 1 X HEX KEY ETHERNET CABLE (1.5 M)

  • TRB140
  • 4.5 W PSU
  • 1 x LTE antenna (magnetic mount, SMA male, 3 m cable)
  • Micro-USB cable (0.8 m)
  • 1 x hex key
  • LAN cable
  • QSG (Quick Start Guide)
  • RMS Flyer
  • Packaging box DATASHEET // TRB140 WHAT'S IN THE BOX?

1 X LTE ANTENNA (MAGNETIC

MOUNT, SMA MALE, 3 M CABLE) * For all standard order codes standard package contents are the same, execpt for PSU. Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

PRODUCT CODE PACKAGE CONTAINSHS CODE HTS CODE STANDARD ORDER CODES TRB140 003000 For more information on all available packaging options – please contact us directly. 851762 8517.62.00 Standard Package PRODUCT CODE FREQUENCYREGION (OPERATOR) AVAILABLE VERSIONS The price and lead-times for region (operator) specific versions may vary. For more information please contact us. * - Versions for other regions are under development. Europe, the Middle East, Africa, Korea, Thailand, India, Malaysia 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A 4G (LTE-TDD): B38, B40, B41 3G: B1, B8 2G: B3, B8 TRB140 1***** South America, Australia, New Zealand, Taiwan, Malaysia 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B28 4G (LTE-TDD): B40 3G: B1, B2, B5, B8 2G: B2, B3, B5, B8 Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Philips Pan Head screw #6-32×3/16, 2pcs 82 mm x 46 mm x 20 mm V DIN RAIL KIT DIN Rail adapter Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx ORDER CODE HTS CODEHS CODE PR5MEC00 For more information on all available packaging options – please contact us directly. 73269098 7326.90.98 SURFACE MOUNTING KIT Parameter Mounting standard Material Weight Screws included Dimensions RoHS Compliant Value Flat surface mount ABS + PC plastic 2x5 g Philips Pan Head screw #6-32×3/16, 2pcs 25 mm x 48 mm x 7.5 mm V DIN RAIL KIT Surface mounting kit Philips Pan Head screw #6-32×3/16, 2pcs ORDER CODE HTS CODEHS CODE PR5MEC12 For more information on all available packaging options – please contact us directly. 73269098 7326.90.98 COMPACT DIN RAIL KIT Parameter Mounting standard Material Weight Screws included Dimensions RoHS Compliant Value 35mm DIN Rail ABS + PC plastic 6.5 g Philips Pan Head screw #6-32×3/16, 2pcs 70 mm x 25 mm x 14,5 mm V DIN RAIL KIT Compact plastic DIN Rail adapter (70x25x14,5mm) Philips Pan Head screw #6-32×3/16, 2pcs ORDER CODE HTS CODEHS CODE PR5MEC11 For more information on all available packaging options – please contact us directly. 73269098 7326.90.98 Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

TRB140 SPATIAL MEASUREMENTS & WEIGHT DATASHEET // TRB140 MAIN MEASUREMENTS W x H x D dimensions for TRB140 Device housing*: Box: 74.5 x 25 x 64.4 173 x 71 x 148 TOP VIEW The figure below depicts the measurements of TRB140 and its components as seen from the top: RIGHT VIEW The figure below depicts the measurements of TRB140 and its components as seen from the right side: *Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below. Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

The figure below depicts the measurements of TRB140 and its components as seen from the front: FRONT VIEW The figure below depicts the measurements of TRB140 and its components as seen from the back: REAR VIEW Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. The figure below depicts an approximation of the device's dimensions when cables and antennas are attached: MOUNTING SPACE REQUIREMENTS

The scheme below depicts protrusion measurements of an attached DIN Rail: DIN RAIL Copyright © 2022, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.