TR600 ZIEHL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ZIEHL industrie-elektronik, 74523 Schwäbisch Hall, Germany, +49 791 504-0, info@ziehl.de, www.ziehl.de Pt 100-Temperature Relays Type TR measuring and monitoring range -199 ... +800 °C 6 sensor inputs with 2- or 3- wire connection 6 relay outputs K1 to K6 with change-over contacts switching points for single sensor or group of 2, 3 or 6 sensors sensor error relay K7 monitors sensor break or sensor short circuit as well as an interruption of the power- supply. 2 analog outputs, 0/4...20 mA and 0/2...10 V, with individual scaling. universal power supply in 2 ranges AC/DC 24 - 240 V USB-Stick-Terminal for up- and download of sets of parameters and for firmware- updates Displays built-in 3 digit temperature display and 1 digit program-mode display LED Alarm showing state of the alarm relays LED Sensor Error blinking at sensor short circuit or sensor interruption. Stored Values of MIN- and MAX- temperature can be displayed „Sensor select“ showing temperatures of the diffe- rent sensors „Alarm select“ showing switching points . Programmable for each relay extra: hysteresis electronic reclosing lock or autoreset switch-on delay and switch-off delay MIN or MAX- function of relay relay releases or picks up when exceeding the setpoint Function Pt100-Temperature-Relay Type TR600 Digital, 6 Sensors, 6 Limits, 2 analog outputs Temperature Relay for 6 Sen- sors Pt100 The Pt100-temperature relay TR600 monitors up to six sensors Pt100 (RTD) at the same time. Six switching points and six relays permit almost any combination of switching action. It also can select the highest temperature of groups of sensors. The tempera- tures of two sensors or groups of sensors can be issued to 2 analog outputs i.e. for remote displays or further evaluation. Programming is very variable and simple. Due to the fact that 6 type Pt100 sensors can be con- nected, the unit is especially suitable for temperature monitoring wherever up to 6 different measuring points must be monitored simultaneausly:

  • machines, bearings, plants
  • motors and generators with simultaneous monitoring of bearings and coolant.
  • transformers with additional monitoring of the core temperature also 2017-09-06 TR600 Part number: T224360 with analog output

ZIEHL industrie-elektronik, 74523 Schwäbisch Hall, Germany, +49 791 504-0, info@ziehl.de, www.ziehl.de Pt100-Temperature Relays Type TR Technical Data TR600 Rated supply voltage Us Temperature alarm Relay outputs Testing conditions Sensor connection Housing Analog output OUT 1/2 AC/DC 24 – 240 V tolerance DC-supply DC 20,4...297 V tolerance AC-supply AC 20...264 V power consumption < 4 W, < 13 VA frequency 0 / 50 / 60 Hz 7 change-over contacts (co) switching voltage max. AC 415 V switching current max. 5 A switching power max. 1250 VA (ohmic load) max. 120 W at DC 30 V Nominal operational current Ie AC 15 Ie = 3 A Ue = 250 V DC 13 Ie = 2 A Ue = 24 V Ie = 0,1 A Ue = 250 V recommended fuse NO 4 A time-lag or miniature circuit-breaker MCB B4 recommended fuse NC 3.15 A time-lag expected life mechanical 3 x 107 operations expected life electrical 1 x 105 operations with AC 250 V / 5 A, cos j = 1 EN 60 010-1 ambient temperature range - 20 ... + 65 °C galvanic separation Us-Relay, Sensors, USB, Analog output Reset input -> DC 3820 V Relay - Sensors, USB, Analog output Reset input -> DC 3820 V No galvanic separation Sensors, USB, Analog output, Reset input 6 x Pt 100 acc. to EN 60751 / IEC 60751, 2- / 3-wire measuring accuracy ±0,5 % of value ±1 Digit sensor current ≤ 0,7 mA measuring delay time tM <1,5 s switch points -199 ... +800 °C hysteresis 1 ... 99 K delay time tALARM 0,1 ... 99,9 s delay time tALARM off 0 ... 999 s voltage outputs DC 0/2 V – 10 V , max. DC 10 mA current outputs DC 0/4 mA – 20 mA output resistance current max. 500 Ω no-load voltage max. DC 16 V accuracy 1% of span ±1 K design V8 dimensions (h x w x d) 90 x 140 x 58 [mm] line connection solid wire 1 x 1,5 mm2(1,0 mm2 with end sleeves for strands) protection housing / terminals IP 30 / IP 20 attachment on 35 mm DIN rail according to EN 60715 or M4 screw weight app. 360 g 2017-09-06