TPW3221 3PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 15

Technical content

Features

⚫ Latch-Up Performance Exceeds 800 mA Per JESD 78, Class II ⚫ Supply Voltage: 1.65V to 5.5V ⚫ Low ON-State Resistance: typical 0.95Ω at Vs = 4.5V ⚫ Bandwidth: 100 MHz ⚫ Fast switching times: tON =40 ns, tOFF =15 ns ⚫ Break-Before-Make Switching ⚫ Operation Temperature Range: –40°C to 125°C

Applications

⚫ Industry control systems ⚫ Battery-powered systems ⚫ Audio Signal Routing ⚫ Portable Instruments and Mobile Device Pin Configuration VCC NC1 10Pin MSOP/DFN -V/F Suffixes NO1 COM1 IN1 NO2 GND COM2 IN2 NC2 Function Table IN1, IN2 NC1, NC2 NO1, NO2 Low ON OFF High OFF ON

Description

TPW3221 is high performance Single Pole/Double Throw (SPDT) analog switches. The devices feature ultra low R ON of 1.2Ω maximum at 4.5V VCC and will operate over the wide VCC range of 1.65V to 5.5V. The TPW3221 features very low quiescent current even when the control voltage is lower than the VCC supply. This feature services the portable applications very well allowing for the direct interface with processor general purpose I/Os. The TPW3221 has very excellent channel to channel crosstalk performance to fit the application with high channel to channel isolation requirement. Pin Description -140 -120 -100 -80 -60 -40 -20 10K 100K 1M 10M Crosstalk(dB) Frequency(Hz) Pin name Pin No Pin function VCC 1 Power supply NO1 2 Switch Port 1, Normal Open COM1 3 Common switch port 1 IN1 4 Select pin 1 NC1 5 Switch Port 1, Normal Close GND 6 Ground NC2 7 Switch Port 2, Normal Close IN2 8 Select pin 2 COM2 9 Common switch port 2 NO2 10 Switch Port 2, Normal Open

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch Table of Contents

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch

Revision History

2018/6/24 Rev.Pre Pre-Release Version 2019/1/28 Rev.0 Initial Version 2019/7/24 Rev.0.01 Update Tape and Reel Information of TPW3221-FR: 3000->4000, remove data code information Correct Toff test condition in figure 6: 50% of output -> 90% of output Spec of ΔRON at 1.65Vcc change: 2/3/3ohm –> 5/7/7ohm Spec of Ton/Toff/Tb at 1.65Vcc change: “max” -> “typ” Order Information Order Number Operating Temperature Range Package Marking Information MSL Transport Media, Quantity TPW3221-VR -40 to 125°C 10-Pin MSOP W3221 3 Tape and Reel, 3000 TPW3221-FR -40 to 125°C 10-Pin DFN 3*3 W3221 3 Tape and Reel, 4000

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch Absolute Maximum Ratings Note 1 Parameters Rating Supply Voltage, VCC -0.5V to 6V Select Input Voltage -0.5V to 6V Select Input Diode Current –50mA Switch I/O Port Voltage -0.5 to VCC + 0.5 Switch I/O Port diode current ±50mA Switch Current 200mA Maximum Junction Temperature 150° C Storage Temperature Range –65 to 150° C Lead Temperature (Soldering, 10 sec) 260° C Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. ESD Rating Symbol Parameter Condition Minimum Level Unit HBM Human Body Model ESD ANSI/ESDA/JEDEC JS-001 4 kV CDM Charged Device Model ESD ANSI/ESDA/JEDEC JS-002 2 kV Thermal Information Package Type θJA θJC Unit 10-Pin MSOP 150 100 ° C/W 10-Pin DFN 3*3 75 54 ° C/W Recommended Operating Conditions Note 1 Over operating temperature range Parameters Min Max Unit Supply Voltage, VCC 1.65 5.5 V Select Input Voltage 0 VCC V Input Transition Rise and Fall Rate 100 ns/V Switch I/O Port Voltage 0V VCC V Operating Temperature Range –40 125 °C Note 1: Select input must be held HIGH or LOW and it must not float.

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch

Electrical Characteristics

VCC = 4.5 to 5.5V, unless otherwise noted. Symbol Parameter Conditions VCC (V) 25° C -40° C to 85° C -40° C to 125° C Limit Unit Power Supply ICC Quiescent Supply Current VIN = 0V or VCC 5.5 0.3 0.5 1.5 Max μA ΔICC Increase in ICC per Input Select Input at 2.7V, others at VCC or GND 4.3 30 35 35 Max μA Digital Input VIH Input Voltage High 2.4 2.4 Min V VIL Input Voltage Low 0.8 0.8 Max V IIN Control Input Leakage VIN = 0V or VCC 5.5 ±1 ±1 Max μA Analog Switch RON IOUT = 100mA, NCx or NOx = 3.5V 4.5 0.95 Typ Ω RFLAT(ON) On Resistance Flatness IOUT = 100mA, NCx or NOx = 0V, 1V, 2V 4.5 0.3 0.4 0.5 Max Ω INO(OFF), INC(OFF) Switch OFF Leakage Current on B0, B1 COMx = 1V, 4.5V, NCx or NOx = 4.5V, 1V 5.5 ± 10 ± 25 ± 50 Max nA IA(OFF) Switch OFF Leakage Current on A COMx = 1V, 4.5V, NCx or NOx = 4.5V, 1V 5.5 ± 10 ± 50 ± 100 Max nA IA(ON) Switch ON Leakage Current on A COMx = 1V, 4.5V, NCx or NOx = 1V, 4.5V or Floating 5.5 ± 10 ± 50 ± 100 Max nA Dynamic Characteristics tPHL, tPLH Switch IN to OUT time NCx or NOx = 3V,RL = 50Ω, CL = 35pF, Figure 7 4.5 5 Typ ns tON Switch turn-on time NCx or NOx = 3V,RL = 50Ω, CL = 35pF, Figure 7 4.5 40 45 45 Max ns tOFF Switch turn-off time NCx or NOx = 3V,RL = 50Ω, CL = 35pF, Figure 7 4.5 15 20 20 Max ns tB Break before make time NCx or NOx = 3V,RL = 50Ω, CL = 35pF, Figure 8 4.5 20 40 40 Typ ns Q Charge Injection CL = 1.0nF, VGEN = 0V, RGEN = 0Ω, Figure 9 5.5 20 Typ pC OFF-Isolation f = 1MHz, RL = 50Ω, Figure 10 5 -65 Typ dB Crosstalk f = 1MHz, RL = 50Ω, Figure 11 5 -65 Typ dB Channel to Channel Crosstalk f = 1MHz, Figure 12 5 -120 Typ dB BW Bandwidth RL = 50Ω 5 100 Typ MHz THD Total Harmonic Distortion RL = 600Ω, VIN = 0.5VPP, f = 20Hz to 20kHz 5 0.004 Typ % Capacitance CIN Select Input capacitance 5 5 Typ pF COFF B-Port Off capacitance 5 12 Typ pF CON ON Capacitance 5 40 Typ pF

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch VCC = 2.7 to 3.6V, unless otherwise noted. Symbol Parameter Conditions VCC (V) 25° C -40° C to 85° C -40° C to 125° C Limit Unit Power Supply ICC Quiescent Supply Current VIN = 0V or VCC 3.6 0.3 0.5 1.5 Max μA Digital Input VIH Input Voltage High 1.65 1.65 Min V VIL Input Voltage Low 0.6 0.6 Max V IIN Control Input Leakage VIN = 0V or VCC 3.6 ±1 ±1 Max μA Analog Switch RON IOUT = 100mA, NCx or NOx = 1.5V 2.7 2 Typ Ω RFLAT(ON) On Resistance Flatness IOUT = 100mA, NCx or NOx = 0V, 0.75V, 1.5V 2.7 1.2 1.3 1.4 Max Ω INO(OFF), INC(OFF) Switch OFF Leakage Current on B0, B1 COMx = 0V, 3.6V, NCx or NOx = 3.6V, 0V 3.6 ± 10 ± 25 ± 50 Max nA IA(OFF) Switch OFF Leakage Current on A COMx = 0V, 3.6V, NCx or NOx = 3.6V, 0V 3.6 ± 10 ± 50 ± 100 Max nA IA(ON) Switch ON Leakage Current on A COMx = 0V, 3.6V, NCx or NOx = 0V, 3.6V or Floating 3.6 ± 10 ± 50 ± 100 Max nA Dynamic Characteristics tPHL, tPLH Switch IN to OUT time NCx or NOx = 1.5V,RL = 50Ω, CL = 35pF, Figure 7 2.7 10 Typ ns tON Switch turn-on time NCx or NOx = 1.5V,RL = 50Ω, CL = 35pF, Figure 7 2.7 60 70 70 Max ns tOFF Switch turn-off time NCx or NOx = 1.5V,RL = 50Ω, CL = 35pF, Figure 7 2.7 25 30 30 Max ns tB Break before make time NCx or NOx = 1.5V,RL = 50Ω, CL = 35pF, Figure 8 2.7 20 Typ ns Q Charge Injection CL = 1.0nF, VGEN = 0V, RGEN = 0Ω, Figure 9 3 20 Typ pC OFF-Isolation f = 1MHz, RL = 50Ω, Figure 10 3 -65 Typ dB Crosstalk f = 1MHz, RL = 50Ω, Figure 11 3 -65 Typ dB Channel to Channel Crosstalk f = 1MHz, Figure 12 3 -120 Typ dB BW Bandwidth RL = 50Ω 3 100 Typ MHz THD Total Harmonic Distortion RL = 600Ω, VIN = 0.5VPP, f = 20Hz to 20kHz 3 0.01 Typ %

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch VCC = 1.65 to 1.95V, unless otherwise noted. Symbol Parameter Conditions VCC (V) 25° C -40° C to 85° C -40° C to 125° C Limit Unit Power Supply ICC Quiescent Supply Current VIN = 0V or VCC 1.95 0.3 0.5 1.5 Max μA Digital Input VIH Input Voltage High 1.4 1.4 Min V VIL Input Voltage Low 0.4 0.4 Max V IIN Control Input Leakage VIN = 0V or VCC 1.95 ±1 ±1 Max μA Analog Switch RON IOUT = 10mA, NCx or NOx = 0.9V 1.65 10 Typ Ω RON IOUT = 10mA, NCx or NOx = 0.9V 1.65 15 18 18 Max Ω ΔRON Maximum ON resistance IOUT = 10mA, NCx or NOx = 0.9V 1.65 5 7 7 Max Ω INO(OFF), INC(OFF) Switch OFF Leakage Current on B0, B1 COMx = 0V, 1.95V, NCx or NOx = 1.95V, 0V 1.95 ± 10 ± 25 ± 50 Max nA IA(OFF) Switch OFF Leakage Current on A COMx = 0V, 1.95V, NCx or NOx = 1.95V, 0V 1.95 ± 10 ± 50 ± 100 Max nA IA(ON) Switch ON Leakage Current on A COMx = 0V, 1.95V, NCx or NOx = 0V, 1.95V or Floating 1.95 ± 10 ± 50 ± 100 Max nA Dynamic Characteristics tPHL, tPLH Switch IN to OUT time NCx or NOx = 1.0V,RL = 50Ω, CL = 35pF, Figure 7 1.65 10 Typ ns tON Switch turn-on time NCx or NOx = 1.0V,RL = 50Ω, CL = 35pF, Figure 7 1.65 80 Typ ns tOFF Switch turn-off time NCx or NOx = 1.0V,RL = 50Ω, CL = 35pF, Figure 7 1.65 55 Typ ns tB Break before make time NCx or NOx = 1.0V,RL = 50Ω, CL = 35pF, Figure 8 1.65 20 Typ ns Q Charge Injection CL = 1.0nF, VGEN = 0V, RGEN = 0Ω, Figure 9 1.8 20 Typ pC OFF-Isolation f = 1MHz, RL = 50Ω, Figure 10 1.8 -65 Typ dB Crosstalk f = 1MHz, RL = 50Ω, Figure 11 1.8 -65 Typ dB Channel to Channel Crosstalk f = 1MHz, Figure 12 1.8 -120 Typ dB BW Bandwidth RL = 50Ω 1.8 100 Typ MHz THD Total Harmonic Distortion RL = 600Ω, VIN = 0.5VPP, f = 20Hz to 20kHz 1.8 0.01 Typ %

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch TCOMx = 0°C to 50°C, unless otherwise noted. Symbol Parameter Conditions VCC (V) Spec Limit Unit INO(OFF), INC(OFF) Switch OFF Leakage Current on B0, B1 COMx = 1V, 4.5V, NCx or NOx = 4.5V, 1V 3.6 ±10 Max nA IA(OFF) Switch OFF Leakage Current on A COMx = 1V, 4.5V, NCx or NOx = 4.5V, 1V 3.6 ±20 Max nA IA(ON) Switch ON Leakage Current on A COMx = 1V, 4.5V, NCx or NOx = 1V, 4.5V or Floating 3.6 ±20 Max nA INO(OFF), INC(OFF) Switch OFF Leakage Current on B0, B1 COMx = 1V, 4.5V, NCx or NOx = 4.5V, 1V 5.5 ±10 Max nA IA(OFF) Switch OFF Leakage Current on A COMx = 1V, 4.5V, NCx or NOx = 4.5V, 1V 5.5 ±20 Max nA IA(ON) Switch ON Leakage Current on A COMx = 1V, 4.5V, NCx or NOx = 1V, 4.5V or Floating 5.5 ±20 Max nA

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch NC2 IN2 Vs NO2 Analyzer 50Ω Logic Input: Low A NC1 IN1 50Ω NO1 A Channel to Channel Crosstalk = 20*Log(Vout/Vs) Vout Figure 12 Chanel to Channel Crosstalk, NC1 to NC2

Application Information

A 0.1-μF bypass capacitor on VCC and GND is recommended to prevent power disturbance.

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch Tape and Reel Information Order Number Package D1 W1 A0 B0 K0 P0 W0 Pin1 Quadrant

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch Package Outline Dimensions MSOP-10

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch DFN-10 3*3

www.3peak.com Rev.0.01 TPW3221 Low Voltage 1Ω SPDT Anal og Switch IMPORTANT NOTICE AND DISCLAIMER Copyright© 3PEAK 2012-2023. All rights reserved. Trademarks. Any of the 思瑞浦 or 3PEAK trade names, trademarks, graphic marks, and domain names contained in this document /material are the property of 3PEAK. You may NOT reproduce, modify, publish, transmit or distribute any Trademark without the prior written consent of 3PEAK. Performance Information. Performance tests or performance range contained in this document/material are either results of design simulation or actual tests conducted under designated testing environment. Any variation in testing environment or simulation environment, including but not limited to testing method, testing process or testing temperature, may affect actual performance of the product. Disclaimer. 3PEAK provides technical and reliability data (including data sheets), design resources (including reference designs), application or other design recommendations, networking tools, security information and other resources "As Is". 3PEAK makes no warranty as to the absence of defects, and makes no warranties of any kind, express or implied, including without limitation, implied warranties as to merchantability, fitness for a particular purpose or non -infringement of any third -party’s intellectual property rights. Unless otherwise specified in writing, products supplied by 3PEAK are not designed to be used in any life -threatening scenarios, including critical medical applications, automotive safety -critical systems, aviation, aerospace, or any sit uations where failure could result in bodily harm, loss of life, or significant property damage. 3PEAK disclaims all liability for any such unauthorized use.