TPW TYCONASYSTEMS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Integrated Controller with Dump Load to Optimize Performance
- Wind Turbine startup wind speed of 2.1m/s (4.5mph)
- Smooth and quiet running maintenance free sealed turbine
- Sealed die cast aluminum housing for protection from harsh environments
- Very light and compact
- Easy Installation and Maintenance Free Operation
- Electronic over-speed protection
Applications
- Battery Charging Applications • Surveillance Cameras
- Wireless Base Stations • Electric Gate Openers, Electric Fences
- Street Lamps and Signs • Remote Cabins and buildings
- Boats, RV’s and static caravans • Security Systems
Description
The BreezePro™ Wind Turbines from Tycon Solar® are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast aluminum enclosure. There are no brushes to wear out or cause electr ical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are 12V /24V auto v oltage select. The unit includes a n embedded smart battery charge controller and dump load resistor. The dump load helps prevent premature braking and increases the total power delivered to the batteries. It also helps protect the turbine in high winds. The entire blade assembly can be removed easily as 1 piece for hurricane protection. This also makes it easier and safer to install. The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output. The mounting is to the inside of the top of a 41mm ID standard pole (1.5” Sched 40) . The hardware used is stainless steel for corrosion protection. The units can be used in arrays of multiple turbines to increase available power. DATA SHEET TPW Series
TPW Series Spec Rev 15 12-Dec-23 Specifications Subject to Change Without Notice Page 2 Specifications System Ordering: TPW-400DT-12/24 400W 12V/24V BreezePro™ Horizontal Wind Turbine with embedded controller and dump load For further information contact: TPW-400DT-12/24 Startup Wind Speed 2.1m/s (4.5mph) Power Rating 300W @ 12.5m/s Max Power Output 400W Battery Charge Voltage Range 12V = 14.7 to 15.2V ; 24V = 29.4 to 30.4V Turbine Voltage Output 12V or 24V Auto Select Battery Voltage Controller Operation 12V/24V <14.5V or 29V 100% to battery >14.5V or 29V Split Power to Battery and Dump Load >15V or 30V 100% to Dump Load Rotor Diameter 1.2m (3.9ft) Blade Material Glass reinforced nylon Body Die Cast Aluminum Weatherproofing IP65 and Salt Mist Corrosion Protected Over-speed Protection Electronic with integrated dump load Survival Wind Speed 50m/s (112mph) Noise Level (Measured at 3 meters) 50dBA Typ @ 450RPM Wind Load Wind Surface Area 375 sq in, 30lbs @ 60MPH, 67lbs @ 90MPH Certifications CE , RoHS Mounting Pole Required 41mm (1.614”) ID (Example 1.5” Sched 40) Operating Temperature -40C to +60C (-40F to + 140F) Weight 10.5kg (23lb) Warranty 2 years Wind Speed RPM Amps MPH r/Min 12V/24V 4.5 120 0.04 / 0.01 5.6 150 0.23 / 0.08 7.4 200 0.67 / 0.32 9.4 250 2.7 / 1.0 11.2 300 5.2 / 2.5 13.2 350 6.9 / 3.3 15 400 8.7 / 4.3 16.8 450 9.3 / 5.5 18.8 500 10 / 6.0 20.6 550 11 / 6.7 Tyconsystems.com
14641 S 800 W Bluffdale, UT 84065
PH: 801-432-0003 FAX: 801-618-4220