PSDIN TYCONASYSTEMS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- High Power and rugged design
- Short Circuit, Over-Voltage, Over-current Protection
- 90-264VAC Auto Ranging Input
- 47~56VDC Adjustable Output
- -40C to +70C Operating Temperature
- Supports Parallel Operation
- Dry Contact DC Alarm
Applications
- Powering PoE Switches
- IP Phone and Security Camera Systems
- Telecommunications
Description
The PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of -40C to +70C. There are two models to supply 120W or 240W. The input is 90 to 264VAC auto -ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. Two 240W supplies operating in parallel will provide 480W total power. There is an alarm output to provid e a dry contact closure to trigger an alarm if the DC output fails, like during a grid power failure. The relay is closed when DC output is normal and open when DC output is in fault condition due to overload or safety shutdown. DATA SHEET PSDIN Series 48VDC 120W AC to DC Industrial Power Supply 40mm for 120W 45mm for 240W
PSDIN Spec Rev 1 20-Nov-18 Specifications Subject to Change Without Notice Page 2 Specifications System Ordering: PSDIN-48-120W 90-264VAC In, 47-56VDC (adjustable) 2.5A 120W Out Industrial DIN Rail Power Supply PSDIN-48-240W 90-264VAC In, 47-56VDC (adjustable) 5A 240W Out Industrial DIN Rail Power Supply For further information contact: PSDIN-48-120W PSDIN-48-240W Input Operating Range 90-264VAC ; 47-63Hz Input In-rush Current 35A Max Input Current 2.2A @ 115VAC ; 1.10A @ 230VAC 4.4A @ 115VAC ; 2.20A @ 230VAC Output Voltage 47~ 56VDC (adjustable) Cont. Load Current 2.5A 5A Maximum Output Power 120W 240W Peak Power (10sec @ 220VAC) 180W 360W Line Regulation +/- 0.5% Load Regulation +/- 1% Voltage Overshoot <5% Ripple / Noise 100mV Peak Efficiency 90% Minimum Dielectric Strength 1500V rms , 1 min, 10mA Max Insulation Resistance 10M Ohms Protection Short Circuit, Over-Voltage, Over-Current, Over Power Alarm Output (“DC” and “OK”) 1A @ 30VDC, 0.5A @ 125VAC. DC OK = Closed, DC Fault = Open Safety Standards GB4943 / EN60950-1 EMI Standards FCC PART 15 CLASS B, EN55022, EN55024 Harmonic Current EN61000-3-2 Class D EMS EN61000-4-x Level 3&4 Operating Temp -40°C to 70°C (-40°F to 158°F) Operating Humidity 5% to 95% non- condensing Storage Temp -40°C to 85°C (-40°F to 185°F) MTBF 200,000 hrs Altitude 2000m (6562ft) Vibration 10-500Hz 2G 10min Sweep, 20G Surge 11ms Weight 0.59 Kg (1.3 Lb) 0.77 Kg (1.7 Lb) Warranty 3 Years Tyconsystems.com
14641 S 800 W Bluffdale, UT 84065
PH: 801-432-0003 FAX: 801-618-4220 48VDC 240W AC to DC Industrial Power Supply Temperature Derating Curve