TPR50 3PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 20

Technical content

Features

  • Wide Input Voltage Range: – 3 V to 15 V
  • Fixed Output Voltage: and 5 V
  • Low Temperature Coefficient: – 1 ppm/°C Typical from 0°C to 70°C – 2 ppm/°C Typical from −40°C to 105°C – 2.5 ppm/°C Typical from −40°C to 125°C
  • High Initial Accuracy: – 0.05% Maximum
  • Low Noise: – 3 μVpp/V
  • Temperature Range: −40°C to 125°C
  • Package Options: – SOP8 – MSOP8

Applications

  • Battery Test Equipment
  • Industry Control
  • Precision Instrumentation
  • Medical Equipment

Description

The TPR50 seires is a family of high-precision and low-temperature-drift voltage references with the initial accuracy of 0.05% and the temperature coefficient of 2.5 ppm/°C. All products of the TPR50 series are able to support both sinking and souring current of ±10 mA and have a low dropout voltage. The high precision and excellent temperature stability performance make the TPR50 series an ideal reference in the system with high resolution requirement. The TPR50 series provides the 8-pin SOP and MSOP package with a wide range of output voltages. All the products are qualified to operate with the temperature range from –40°C to +125°C. Typical Application Circuit IN OUT GND Input Voltage Output Voltage TPR50 NR C IN C NR C OUT TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 1 / 20 DA20220801A1

Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 2 / 20 DA20220801A1

Order Number Output Voltage Package TPR5012-SO1R 1.25 V SOP8 TPR5020-SO1R 2.048 V SOP8 TPR5025-SO1R 2.5 V SOP8 TPR5030-SO1R 3.0 V SOP8 TPR5033-SO1R 3.3 V SOP8 TPR5040-SO1R 4.096 V SOP8 TPR5045-SO1R 4.5 V SOP8 TPR5050-SO1R 5.0 V SOP8 TPR5012-VS1R-S 1.25 V MSOP8 TPR5020-VS1R-S 2.048 V MSOP8 TPR5025-VS1R-S 2.5 V MSOP8 TPR5030-VS1R-S 3.0 V MSOP8 TPR5033-VS1R-S 3.3 V MSOP8 TPR5040-VS1R-S 4.096 V MSOP8 TPR5045-VS1R-S 4.5 V MSOP8 TPR5050-VS1R-S 5.0 V MSOP8

Revision History

2022-08-15 Rev.Pre.0 Preliminary revision. 2023-02-15 Rev.A.0 Initial released. 2023-05-15 Rev.A.1 1. Added MSOP8 Package Products. 2. Updated Thermal Information. 3. Updated Thermal Hysteresis. 4. Updated Capacitive Load Condition. TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 3 / 20 DA20220801A1

Table 1. Pin Functions: TPR50 3 DNC – Do not connect. Left this pin open or connected to the ground. 2 IN I Supply voltage input pin. 1, 7,8 NC – No internal connection.

5 NR/TR I

minimize the output noise level. 6 OUT O Reference voltage output pin.

Absolute Maximum Ratings (1) Parameter Min Max Unit VIN Supply Voltage −0.3 20 V TJ Maximum Junction Temperature −40 150 °C TA Operating Temperature Range −40 125 °C TSTG Storage Temperature Range −65 150 °C TL Lead Temperature (Soldering 10 sec) 260 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. (2) All voltage values are with respect to ground. ESD, Electrostatic Discharge Protection Parameter Condition Minimum Level Unit HBM Human Body Model ESD ANSI/ESDA/JEDEC JS-001 (1) ±2000 V CDM Charged Device Model ESD ANSI/ESDA/JEDEC JS-002 (2) ±1000 V (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Recommended Operating Conditions Parameter Min Typ Max Unit VIN 3 15 V IOUT −10 10 mA COUT 0.1 10 100 μF TJ Junction Temperature Range −40 125 °C Thermal Information Package Type θJA θJC,top θJB θJC,bottom Unit SOP8 115.2 60.8 61.1 64.2 °C/W MSOP8 138.0 54.6 84.5 88.1 °C/W TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 5 / 20 DA20220801A1

Electrical Characteristics

All test condition is at TA = 25°C. VIN = VOUT(NOM) + 0.5 V or 5 V, whichever is grater, COUT = 1 μF, unless otherwise noted. Parameter Conditions Min Typ Max Unit Output Voltage VOUT Output Voltage TPR5012 1.25 V TPR5020 2.048 V TPR5025 2.5 V TPR5030 3 V TPR5033 3.3 V TPR5040 4.096 V TPR5045 4.5 V TPR5050 5 V Initial Accuracy −0.05% +0.05% Output Noise f = 0.1 Hz to 10 Hz 3 μVPP/V Input Voltage and Current VIN Input Voltage VIN,MIN (1) 15 V IQ Quiescent Current TA= –40°C to 125°C 0.6 1 mA Dropout Voltage VDO Dropout Voltage (2) IOUT = ±5 mA, TA = −40°C to 125°C 200 mV IOUT = ±10 mA, TA = −40°C to 125°C 400 mV Output Voltage Temperature Drift TC Temperature Coefficient TA = 0 to 70°C 1 ppm/°C TA = −40°C to 105°C 2 5 ppm/°C TA = −40°C to 125°C 2.5 6 ppm/°C Outout Regulation ΔVOUTΔVIN Line Regulation VIN = VIN,MIN to 15 V, TA = −40°C to 125°C 0.1 ppm/V VIN = 6 V to 15 V, TA = −40°C to 125°C 0.1 ppm/V VIN = VIN,MIN to 6 V, VOUT = 1.25 V, 2.048 V, 2.5 V and 3 V, TA = −40°C to 125°C 20 ppm/V VIN = VIN,MIN to 6 V, VOUT = 3.3 V and

4.096 V, TA = −40°C to 125°C 25 ppm/V

ΔVOUTΔIOUT Load Regulation VIN = VIN,MIN , −10 mA < IOUT < 10 mA 2.5 20 ppm/mA VIN = VIN,MIN , −10 mA < IOUT < 10 mA, TA = −40°C to 125°C 2.5 20 ppm/mA TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 6 / 20 DA20220801A1

Parameter Conditions Min Typ Max Unit Thermal Hysteresis THYS Thermal Hysteresis Cycle 1 (+25°C to +125°C to −40°C to 25 °C) 99 ppm Cycle 2 (+25°C to +125°C to −40°C to 25 °C) 29 ppm Cycle 1 (+25°C to +70°C to 0°C to 25 °C) 56 ppm Cycle 2 (+25°C to +70°C to 0°C to 25 °C) 11 ppm Long-Term Stability LTS Long-Term Stability 1000 hours, SOP8 Package 30 ppm 2000 hours, SOP8 Package ppm Turn-On Settling Time tON Turn-on Settling Time To 0.1% with CL = 1 μF 150 μs Short-Circuit Current ISC Short-Circuit Current VOUT = 0 V 121 mA Capacitive Load CL 0.1 100 μF (1) VIN,MIN = VOUT(NOM) + 0.4 V or 3 V, whichever is greater. (2) Dropout voltage is not tested for the output voltage below 3 V. TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 7 / 20 DA20220801A1

±10 mA and have a low dropout voltage. with high resolution requirement. Figure 15. Functional Block Diagram the operating temperature change, which can be calculated as Equation 1. the temperature range, VOUT is the nominal output voltage. The maximum temperature drift of TPR50 is 6 ppm/°C from −40°C to 125°C.

cycling, VOUT is the nominal output voltage. The TPR50 features a low output noise voltage with a typically value of 8 μVPP at V NOM = 2.5 V under room temperature. the output voltage with external resistor dividers. Figure 16 shows a typical application circuit to adjust the output voltage. Figure 16. Output Voltage Trim with NR/TR Pin Table 2 shows an example of 2.5-V output voltage adjustment. Table 2. Output Voltage Trim Example of 2.5 V (1) RT is the total value of the rheostat, and RA is the low-side value of the rheostat.

PD = VIN − VOUT × IOUT + VIN × IQ (3) The junction temperature can be estimated using Equation 4. θJA is the junction-to-ambient thermal resistance. TJ = TA + PD × θJA (4) TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 14 / 20 DA20220801A1

  • Both input capacitors and output capacitors must be placed as close to the device pins as possible.
  • It is recommended to bypass the IN pin to ground with a 1- μF to 10-μF capacitor in parallel with a 0.1- μF small ceramic capacitor. The loop area formed by the bypass capacitor connection, the IN pin, and the GND pin of the system must be as small as possible.
  • It is required to place a decoupling 1- μF to 50- μF capacitor at the output. A small 1- μF ceramic capacitor in parallel is recommended to filter the noise and improve the output transient performance. Layout Example DNC IN DNC GND NC NC OUT NR V REF To ADC

Figure 18. Layout Example

Order Number Package D1 (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) W0 (mm) Pin1 Quadrant TPR50xx- SO1R (1) SOP8 330 17.6 6.4 5.4 2.1 8 12 Q1 TPR50xx- VS1R-S(1) MSOP8 330 17.6 5.2 3.3 1.5 8 12 Q1 (1) Output voltage value, xx = 12 to 50. For example, 25 means output voltage of 2.5 V. TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 16 / 20 DA20220801A1

Package Outline Dimensions SOP8 TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 17 / 20 DA20220801A1

Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 18 / 20 DA20220801A1

Order Number Operating Temperature Range Package Marking Information MSL Transport Media, Quantity Eco Plan TPR5012-SO1R −40°C to +125°C SOP8 R5A MSL3 4,000 Green TPR5020-SO1R −40°C to +125°C SOP8 R5B MSL3 4,000 Green TPR5025-SO1R −40°C to +125°C SOP8 R5C MSL3 4,000 Green TPR5030-SO1R −40°C to +125°C SOP8 R5D MSL3 4,000 Green TPR5033-SO1R −40°C to +125°C SOP8 R5E MSL3 4,000 Green TPR5040-SO1R −40°C to +125°C SOP8 R5F MSL3 4,000 Green TPR5045-SO1R −40°C to +125°C SOP8 R5H MSL3 4,000 Green TPR5050-SO1R −40°C to +125°C SOP8 R5G MSL3 4,000 Green TPR5012-VS1R-S −40°C to +125°C MSOP8 R5A MSL3 3,000 Green TPR5020-VS1R-S −40°C to +125°C MSOP8 R5B MSL3 3,000 Green TPR5025-VS1R-S −40°C to +125°C MSOP8 R5C MSL3 3,000 Green TPR5030-VS1R-S −40°C to +125°C MSOP8 R5D MSL3 3,000 Green TPR5033-VS1R-S −40°C to +125°C MSOP8 R5E MSL3 3,000 Green TPR5040-VS1R-S −40°C to +125°C MSOP8 R5F MSL3 3,000 Green TPR5045-VS1R-S −40°C to +125°C MSOP8 R5H MSL3 3,000 Green TPR5050-VS1R-S −40°C to +125°C MSOP8 R5G MSL3 3,000 Green (1) Green: 3PEAK defines "Green" to mean RoHS compatible and free of halogen substances. TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 19 / 20 DA20220801A1

IMPORTANT NOTICE AND DISCLAIMER Copyright© 3PEAK 2012-2023. All rights reserved. Trademarks. Any of the 思瑞浦 or 3PEAK trade names, trademarks, graphic marks, and domain names contained in this document /material are the property of 3PEAK. You may NOT reproduce, modify, publish, transmit or distribute any Trademark without the prior written consent of 3PEAK. Performance Information. Performance tests or performance range contained in this document/material are either results of design simulation or actual tests conducted under designated testing environment. Any variation in testing environment or simulation environment, including but not limited to testing method, testing process or testing temperature, may affect actual performance of the product. Disclaimer. 3PEAK provides technical and reliability data (including data sheets), design resources (including reference designs), application or other design recommendations, networking tools, security information and other resources "As Is". 3PEAK makes no warranty as to the absence of defects, and makes no warranties of any kind, express or implied, including without limitation, implied warranties as to merchantability, fitness for a particular purpose or non-infringement of any third- party’s intellectual property rights. Unless otherwise specified in writing, products supplied by 3PEAK are not designed to be used in any life-threatening scenarios, including critical medical applications, automotive safety-critical systems, aviation, aerospace, or any situations where failure could result in bodily harm, loss of life, or significant property damage. 3PEAK disclaims all liability for any such unauthorized use. TPR50 Low-Noise, Low-Drift, Precision Voltage Reference www.3peak.com 20 / 20 DA20220801A1