TPL8151Q 3PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
Features
- Qualified for Automotive Applications – AEC-Q100 Grade 1, TA: −40°C to +125°C – Junction Temperature, TJ: −40°C to +150°C
- Input Voltage Range: 2.75 V to 29 V
- Adjustable Output Voltage from 1.25 V
- 1.5 A Maximum Output Current
- ±2% Output Accuracy Over Line Regulation, Load Regulation, and Operating Temperature Range
- Low Dropout Voltage: 1.2 V Typically at 1.5 A
- High PSRR: – 77 dB at 120 Hz – 72 dB at 1 kHz
- Excellent Transient Response
- Stable with a 10 μF to 100 μF Tantalum Output Capacitor
- Integrated Protection: – Over-Current Protection – Over-Temperature Protection
- Package Options: – ESOP8
Applications
- Automotive High Power Linear Power Supplies
- Automotive Low Noise Power Supplies
- Automotive Microcontroller, ASIC Power Supply
Description
The TPL8151Q is a 1.5-A high-current, low-dropout linear regulator with up to 29-V wide input voltage range. The TPL8151Q supports adjustable output voltage ranging from 1.25 V with an external resistor divider and is stable with a 10-μF to 100-μF tantalum output capacitor. The TPL8151Q is compatible with older three-terminal adjustable linear regulators but has lower dropout voltage, tighter output tolerance, and better transient performance. The TPL8151Q provides a thermal-enhanced ESOP8 package with guaranteed ambient operating temperature (TA) range from −40°C to +125°C. Typical Application Circuit IN OUT ADJ Input C OUT Output C IN TPL8151Q V REF TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 1 / 18 DA20230701A1
1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 2 / 18 DA20230701A1
Order Number Output Voltage Output Current Package TPL8151ADQ-ES1R-S Adjustable 1.5 A ESOP8
Revision History
2021-07-31 Rev.Pre.0 Preliminary 2022-04-15 Rev.Pre.1 1. Updated Thermal Information 2. Added Typical Performance Characteristics 3. Added Tape and Reel Information 2022-08-15 Rev.A.0 Initial released 2024-04-06 Rev.A.1 Updated Thermal Information 2024-10-04 Rev.A.2 Corrected the equation about VOUT and VREF TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 3 / 18 DA20230701A1
Table 1. Pin Functions: TPL8151Q-S 3 ADJ I Output voltage adjust pin. Connect to a resistor divider to adjust the output voltage. 7, 8 IN I Input voltage pin. 1, 2, 4 (1) OUT O Regulated output voltage pin. (1) Pin 4 MUST be directly tied to the other OUT pins.
Absolute Maximum Ratings (1) Parameter Min Max Unit TJ (1) Maximum Junction Temperature Range –40 150 °C TSTG (1) Storage Temperature Range –65 150 °C TL (1) Lead Temperature (Soldering 10 sec) 260 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. (2) All voltage values are with respect to ground. ESD, Electrostatic Discharge Protection Parameter Condition Minimum Level Unit HBM Human Body Model ESD ANSI/ESDA/JEDEC JS-001 (1) ±3.5 kV CDM Charged Device Model ESD ANSI/ESDA/JEDEC JS-002 (2) ±1.5 kV (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Recommended Operating Conditions Parameter Min Max Unit VIN 2.75 29 V VOUT 0 25 V COUT 10 100 µF ESR 0.5 6 Ω TA Ambient Temperature Range –40 125 °C TJ Junction Temperature Range –40 125 °C Thermal Information Package Type θJA θJB θJC,TOP Unit ESOP8 36.1 14.63 47.53 °C/W TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 5 / 18 DA20230701A1
Electrical Characteristics
All test conditions: VIN = VOUT(NOM) + 1.5 V or 4.25 V, whichever is greater; C IN = COUT = 10 µF, −40°C ≤ TJ ≤ +125°C, unless otherwise noted. Parameter Conditions Min Typ Max Unit Supply Voltage and Current VIN (1) Input Supply Voltage VIN, MIN 29 V Regulated Voltage and Current VOUT (2) Output Voltage Accuracy IOUT = 10 mA, TA = 25°C 1% IOUT = 10 mA to 1.5 A, VIN = 2.75 V to 29 V -2% 2% VREF (3) Reference Voltage IOUT = 10 mA, TA = 25°C 1.238 1.25 1.263 V ΔVOUT Line Regulation IOUT = 10 mA, VIN = 2.75 V to 16.5 V, TA = 25 °C 0.04% IOUT = 10 mA, VIN = 2.75 V to 16.5 V 0.04% 0.2% Load Regulation IOUT = 10 mA to 1.5 A, TA = 25°C 0.2% IOUT = 10 mA to 1.5 A 0.2% 0.4% VDO (4) Dropout Voltage IOUT = 1.5 A 1.3 1.5 V IOUT Minimum Load VIN = 29 V 5 10 mA Output Current VOUT in regulation 0 1.5 A IADJ ADJ Pin Current VIN = 4.25 V, IOUT = 10 mA 75 120 μA ISC Short-circuit Current Limit VIN – VOUT = 5 V 1.6 2.3 A VIN – VOUT = 25 V 50 200 mA PSRR Power Supply Rejection Ratio IOUT = 0.1 A, f = 120 Hz, COUT = 22 μF, CADJ = 22 μF, VOUT = 1.8 V, VIN = VOUT + 2 V 77 dB IOUT = 0.1 A, f = 1 kHz, COUT = 22 μF, CADJ = 22 μF, VOUT = 1.8 V, VIN = VOUT + 2 V 72 dB IOUT = 0.1 A, f = 100 kHz, COUT = 22 μF, CADJ = 22 μF, VOUT = 1.8 V, VIN = VOUT + 2 V 35 dB VN Output Noise Voltage IOUT = 10 mA, BW = 10 Hz to 100 kHz 17.5 μVRMS Temperature Range TSD Thermal Shutdown Threshold 180 °C Thermal Shutdown Hysteresis 15 °C (1) VIN,MIN = VOUT(NOM) + 1.5 V or 2.75 V, whichever is greater. (2) Tolerance of external resistor divider is not included. (3) VREF is the voltage value between OUT and ADJ. TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 6 / 18 DA20230701A1
(4) Dropout voltage is the minimum input to output voltage differential needed to maintain regulation at a specified output current and measure for VOUT ≥ 2.75 V. In dropout mode, the output voltage will be equal to VIN – VDO. TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 7 / 18 DA20230701A1
tolerance, and better transient performance. Figure 11. Functional Block Diagram the output voltage. Use Equation 1 to calculate the output voltage. Where the feedback voltage VREF is 1.25 V. output error. The resistor R1 should be put close to both the OUT pin and the ADJ pin. pulled down below the regulated voltage, the over-current protection starts to work and limits the output current. enough, it will cause over-temperature protection.
Over-Temperature Protection The over-temperature protection starts to work when the junction temperature exceeds the thermal shutdown threshold (T SD), which turns off the regulator immediately. When the device cools down, the junction temperature falls below a value, which equals to the thermal shutdown threshold minus thermal shutdown hysteresis, and the regulator turns on again. The junction temperature range should be limited according to the Recommended Operating Conditions table. Continuously operating above the junction temperature range will shorten the lifetime of the device. TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 11 / 18 DA20230701A1
- Both input and output capacitors must be placed as close to the device pins as possible, and vias between capacitors and device power pins must be avoided.
- It is recommended to bypass the input pin to ground with a 0.1-μF bypass capacitor. The loop area formed by the bypass capacitor connection, the IN pin, and the GND pin of the system must be as small as possible.
- It is recommended to use wide and thick copper to minimize I×R drop and heat dissipation. TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 13 / 18 DA20230701A1
Order Number Package D1 (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) W0 (mm) Pin1 Quadrant TPL8151ADQ- ES1R-S ESOP-8 330 17.6 6.4 5.4 2.1 8 12 Q1 TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 14 / 18 DA20230701A1
Package Outline Dimensions ESOP8-B TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 15 / 18 DA20230701A1
Order Number Operating Temperature Range Package Marking Information MSL Transport Media, Quantity Eco Plan TPL8151ADQ-ES1R-S −40 to 125°C ESOP8 L15A MSL3 4,000 Green Green: 3PEAK defines "Green" to mean RoHS compatible and free of halogen substances. TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 16 / 18 DA20230701A1
IMPORTANT NOTICE AND DISCLAIMER Copyright© 3PEAK 2012-2024. All rights reserved. Trademarks. Any of the 思瑞浦 or 3PEAK trade names, trademarks, graphic marks, and domain names contained in this document /material are the property of 3PEAK. You may NOT reproduce, modify, publish, transmit or distribute any Trademark without the prior written consent of 3PEAK. Performance Information. Performance tests or performance range contained in this document/material are either results of design simulation or actual tests conducted under designated testing environment. Any variation in testing environment or simulation environment, including but not limited to testing method, testing process or testing temperature, may affect actual performance of the product. Disclaimer. 3PEAK provides technical and reliability data (including data sheets), design resources (including reference designs), application or other design recommendations, networking tools, security information and other resources "As Is". 3PEAK makes no warranty as to the absence of defects, and makes no warranties of any kind, express or implied, including without limitation, implied warranties as to merchantability, fitness for a particular purpose or non-infringement of any third- party’s intellectual property rights. Unless otherwise specified in writing, products supplied by 3PEAK are not designed to be used in any life-threatening scenarios, including critical medical applications, automotive safety-critical systems, aviation, aerospace, or any situations where failure could result in bodily harm, loss of life, or significant property damage. 3PEAK disclaims all liability for any such unauthorized use. TPL8151Q-S 1.5-A Wide-Input High-Current Low-Dropout Linear Regulator www.3peak.com 17 / 18 DA20230701A1
1.5-A Wide-Input High-Current Low-Dropout Linear Regulator This page intentionally left blank www.3peak.com 18 / 18 DA20230701A1