TP27 3PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 14

Technical content

Features

  • Supply Voltage: 4.5 V to 36 V
  • Offset Voltage: ±50 μV (Max)
  • Differential Input Voltage Range to Supply Rail, can Work as Comparator
  • Input Rail to −VS, Rail-to-Rail Output
  • Drive any Capacitive Load
  • Bandwidth: 6 MHz, Slew Rate: 5 V/μs
  • Excellent EMI Suppress Performance: 85 dB at 1 GHz
  • Over-Temperature Protection
  • Low Noise: 8 nV/√Hz at 1 kHz
  • 2-kV HBM, 1-kV CDM, 500-mA Latch Up
  • Operating Temperature Range: −40°C to 125°C

Applications

  • Instrumentation
  • Active Filters, ASIC Input or Output Amplifier
  • Sensor Interface
  • Industrial Control

Description

The TP27 is a series of the newest high supply voltage amplifiers with low offset, low power, and stable high- frequency response. The series incorporates 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 6-MHz bandwidth, 5-V/ μs slew rate, and low distortion. The input common-mode voltage range extends to −VS, and the outputs swing rail- to-rail. The TP27 can be used as plug-in replacements for commercially available op amps to reduce power consumption, extend the input/output range, and improve performance. The combination of features makes the TP27 an ideal choice for industrial control and instrumentation. TP07A TP17 TP27 Unit VOS, 25°C ±150 ±100 ±50 μV VOS, −40 to 85°C ±500 ±400 ±70 μV GBW 1 6 6 MHz IQ 1.5 2 1.6 mA TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 1 / 14 AA20241201A3

36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 2 / 14 AA20241201A3

Revision History

2018-12-21 Rev.Pre.0 Pre-released version. 2019-09-11 Rev.A.0 Initial version. 2020-08-01 Rev.A.1 Corrected the typo in the header: from 5 MHz to 6 MHz. Added the test figure. 2021-07-07 Rev.A.2 Updated the Absolute Maximum Ratings:

  • Input Voltage: (−VS) − 0.3 to (+VS) + 0.3 → (−VS) − 0.3 to 40 V ;
  • Differential Input Voltage : (+VS) − (−VS) → (−VS) − (+VS) to (+VS) − (−VS) . 2024-12-17 Rev.A.3 The following updates are all about the new datasheet formats or typos, and the actual product remains unchanged.
  • Updated to a new datasheet format.
  • Updated the Package Outline Dimensions.
  • Updated the Tape and Reel Information. TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 3 / 14 AA20241201A3

Table 1. Pin Functions: TP27

1 NC - Not connect

5 NC - Not connect

6 OUT O Output

8 NC - Not connect

Absolute Maximum Ratings (1) Parameter Min Max Unit Supply Voltage: (+VS) – (−VS) 40 V Input Voltage (−VS) – 0.3 40 V Differential Input Voltage (−VS) – (+VS) (+VS) − (−VS) V Input Current: +IN, −IN (2) −10 10 mA Output Voltage (−VS) – 0.3 (+VS) + 0.3 V Output Short-Circuit Duration (3) Infinite TJ Maximum Junction Temperature 150 °C TA Operating Temperature Range −40 125 °C TSTG Storage Temperature Range −65 150 °C TL Lead Temperature (Soldering, 10 sec) 260 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. (2) The inputs are protected by ESD-protection diodes to the negative power supply. If the input extends more than 300 mV beyond the negative power supply, the input current should be limited to less than 10 mA. (3) A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power supply voltage and how many amplifiers are shorted. The thermal resistance varies with the amount of PC board metal connected to the package. The specified values are for short traces connected to the leads. ESD, Electrostatic Discharge Protection Symbol Parameter Condition Minimum Level Unit HBM Human Body Model ESD ANSI/ESDA/JEDEC JS-001 (1) 2 kV CDM Charged Device Model ESD ANSI/ESDA/JEDEC JS-002 (2) 1 kV LU Latch Up JESD 78, 25°C 500 mA JESD 78, 125°C 250 mA (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Thermal Information Package Type θJA θJC Unit SOP8 158 43 °C/W TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 5 / 14 AA20241201A3

Electrical Characteristics

All test conditions: VS = 30 V, TA = 25°C, RL = 10 kΩ, unless otherwise noted. Symbol Parameter Conditions TA Min Typ Max Unit Power Supply VS Supply Voltage Range 4.5 36 V IQ Quiescent Current per Amplifier VS = 30 V 1.4 1.6 mA −40°C to 125°C 1.8 mA VS = 5 V 1.2 1.5 mA −40°C to 125°C 1.7 mA PSRR Power Supply Rejection Ratio VS = 4.5 V to 36 V 125 140 dB −40°C to 125°C 120 dB Input Characteristics VOS Input Offset Voltage VS = 30 V, VCM = 15 V −50 50 μV −40°C to 125°C −70 70 μV VS = 5 V, VCM = 2.5 V −50 50 μV −40°C to 125°C −70 70 μV VOS TC Input Offset Voltage Drift −40°C to 125°C 0.01 0.2 μV/°C IB Input Bias Current 100 pA −40°C to 125°C 100 pA IOS Input Offset Current 100 pA IIN Different Input Current VS = 36 V, VID = 36 V 10 100 μA −40°C to 125°C 120 μA CIN Input Capacitance Differential mode 5 pF Common mode 2.5 pF AV Open-Loop Voltage Gain RLOAD = 10 kΩ, VOUT = 0.5 V to 29.5 V 130 140 dB −40°C to 125°C 125 dB VCMR Common-Mode Input Voltage Range (−VS) (+VS) – 1.5 V CMRR Common-Mode Rejection Ratio VCM = 0 V to 28.5 V 125 140 dB −40°C to 125°C 120 dB Output Characteristics Output Swing from Positive Rail RLOAD = 100 kΩ to VS / 2 10 15 mV −40°C to 125°C 30 mV RLOAD = 10 kΩ to VS / 2 75 100 mV −40°C to 125°C 180 mV RLOAD = 2 kΩ to VS / 2 400 500 mV −40°C to 125°C 750 mV TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 6 / 14 AA20241201A3

Symbol Parameter Conditions TA Min Typ Max Unit Output Swing from Negative Rail RLOAD = 100 kΩ to VS / 2 3 5 mV −40°C to 125°C 10 mV RLOAD = 10 kΩ to VS / 2 25 35 mV −40°C to 125°C 60 mV RLOAD = 2 kΩ to VS / 2 130 150 mV −40°C to 125°C 300 mV ISC Output Short-Circuit Current Source 60 95 mA −40°C to 85°C 40 mA −40°C to 125°C 35 mA Sink 130 150 mA −40°C to 85°C 100 mA −40°C to 125°C 85 mA Capacitive Load Drive 1 nF AC Specifications GBW Gain-Bandwidth Product 6 MHz SR Slew Rate G = 1, 10-V step 3 5 V/μs −40°C to 125°C 2.2 V/μs tOR Overload Recovery 500 ns tS Settling Time, 0.1% G = 1, 10-V step 7 μs Settling Time, 0.01% 12 μs PM Phase Margin RL = 10 kΩ, CL = 100 pF 70 ° GM Gain Margin RL = 10 kΩ, CL = 100 pF 15 dB Noise Performance EN Input Voltage Noise f = 0.1 Hz to 10 Hz 0.1 μVPP eN Input Voltage Noise Density f = 0.1 kHz 8 nV/√Hz f = 1 kHz 8 nV/√Hz f = 10 kHz 10 nV/√Hz f = 100 kHz 20 nV/√Hz iN Input Current Noise f = 10 kHz 200 fA/√Hz THD+N Total Harmonic Distortion and Noise f = 1 kHz, G = 1, RL = 10 kΩ, VOUT = 6 VRMS 0.0005 % TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 7 / 14 AA20241201A3

(mm) (mm) (mm) (1) (mm) (1) (mm) (1) (mm) (mm) Pin1 Quadrant (1) The value is for reference only. Contact the 3PEAK factory for more information. TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 11 / 14 AA20241201A3

Package Outline Dimensions SOP8 TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 12 / 14 AA20241201A3

Order Number Operating Temperature Range Package Marking Information MSL Transport Media, Quantity Eco Plan TP27-SR −40 to 125°C SOP8 TP27 3 Tape and Reel, 4000 Green Green: 3PEAK defines "Green" to mean RoHS compatible and free of halogen substances. TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 13 / 14 AA20241201A3

IMPORTANT NOTICE AND DISCLAIMER Copyright© 3PEAK 2012-2024. All rights reserved. Trademarks. Any of the 思瑞浦 or 3PEAK trade names, trademarks, graphic marks, and domain names contained in this document /material are the property of 3PEAK. You may NOT reproduce, modify, publish, transmit or distribute any Trademark without the prior written consent of 3PEAK. Performance Information. Performance tests or performance range contained in this document/material are either results of design simulation or actual tests conducted under designated testing environment. Any variation in testing environment or simulation environment, including but not limited to testing method, testing process or testing temperature, may affect actual performance of the product. Disclaimer. 3PEAK provides technical and reliability data (including data sheets), design resources (including reference designs), application or other design recommendations, networking tools, security information and other resources "As Is". 3PEAK makes no warranty as to the absence of defects, and makes no warranties of any kind, express or implied, including without limitation, implied warranties as to merchantability, fitness for a particular purpose or non-infringement of any third- party’s intellectual property rights. Unless otherwise specified in writing, products supplied by 3PEAK are not designed to be used in any life-threatening scenarios, including critical medical applications, automotive safety-critical systems, aviation, aerospace, or any situations where failure could result in bodily harm, loss of life, or significant property damage. 3PEAK disclaims all liability for any such unauthorized use. TP27 36-V, 6-MHz, 50-μV VOS Operational Amplifiers www.3peak.com 14 / 14 AA20241201A3