TP2581

TP2581 3PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 18

Technical content

Features

⚫ Supply Voltage: 3V to 36V, or ±1.5V to ±18 V ⚫ Differential Input Voltage Range to Supply Rail ⚫ Input Rail to –VS, Rail to Rail Output ⚫ Fast Response: 10 MHz Bandwidth, 8 V/μs Slew Rate, 100ns Overload Recovery ⚫ Low Offset Voltage: ±3mV Maximum at 25° C, ±3.5mV Maximum at -40° C to 85° C ±4mV Maximum at -40° C to 125° C ⚫ Very Low THD+N: 0.0007% at Gain = 1, 20kHz ⚫ Excellent EMIRR: 58dB at 900MHz ⚫ 2KV HBM, 1KV CDM, 150mA Latch Up ⚫ –40°C to 125°C Operation Temperature Range

Applications

⚫ Audio ⚫ Sensor Interface ⚫ Motor Control

Description

The TP258X series amplifiers are newest high supply voltage amplifiers with low offset, low power and stable high frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 10MHz bandwidt h, 8 V/μs slew rate , and 100ns overload recovery time while drawing only 3mA of quiescent current per amplifier; t he TP258X family achieve the best THD+N performance in audio signal range, it’s the ideal choices for motor control and audio amplification. Pin Configuration TP2581 5-Pin SOT23 -T and -C Suffixes TP2582 8-Pin SOIC/TSSOP/MSOP -S, -TS and -V Suffixes Out A ﹢In A ﹣In A ﹢In B ﹣In B Out BA B ﹣Vs ﹢Vs TP2584 14-Pin SOIC/TSSOP -S and -T Suffixes Out A ﹢In A ﹣In A DA CB Out D ﹢In D ﹣In D Out B ﹢In B ﹣In B Out C ﹢In C ﹣In C ﹣Vs﹢Vs 1Out + In - In ﹣Vs ﹢Vs TP2581 8-Pin SOIC (-S Suffix) Out NC ﹢In ﹣In ﹣Vs ﹢Vs NC NC

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps Table of Contents

Revision History

2018/7/21 Rev.Pre Pre-Release Version 2019/3/1 Rev.0 Initial Version 2019/10/23 Rev.0.01 Added new product: TP2581-TR 2019/12/6 Rev.0.02 Updated Iq Spec of TP2581 2020/4/25 Rev.A Added figure: PSRR vs. Freq, CMRR vs. Freq 2020/7/21 Rev.A.1 Updated figure: PSRR vs. Freq 2020/9/24 Rev.A.2 Update the description of Absolute Maximum Ratings: “Maximum Junction Temperature” -> “Maximum Operating Junction Temperature” 2023/7/8 Rev.A.3 Added figure: Open Loop Gain and Phase Margin vs Frequency; Maximum Output Voltage vs Frequency. The following updates are all about the new datasheet formats or typo, the actual product remains unchanged. Updated to new format of package dimensions and tape and reel information.

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps Order Information Order Number Operating Temperature Range Package Marking Information MSL Transport Media, Quantity TP2581-TR -40 to 125°C 5-Pin SOT23 258XX Note 1 3 Tape and Reel, 3000 TP2582-SR -40 to 125°C 8-Pin SOIC 2582 XXXX Note 1

3 Tape and Reel, 4000

TP2582-TSR -40 to 125°C 8-Pin TSSOP 2582 XXXX Note 1

3 Tape and Reel, 3000

TP2582-VR -40 to 125°C 8-Pin MSOP 2582 XXXX Note 1 TP2584-SR -40 to 125°C 14-Pin SOIC 2584 XXXX Note 1

3 Tape and Reel, 2500

TP2584-TR -40 to 125°C 14-Pin TSSOP 2584 XXXX Note 1 Note 1: “XXXX” and “XX” identify the manufacture site and date code information.

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps Absolute Maximum Ratings Note 1 Parameters Rating Supply Voltage, (+VS)– (-VS) 40 V Input Voltage (-VS) – 0.3 to (+VS) + 0.3 Differential Input Voltage (+VS) - (-VS) Input Current: +IN, –IN Note 2 ±10mA Output Short-Circuit Duration Note 3 Infinite Maximum Operating Junction Temperature 150°C Operating Temperature Range –40 to 125°C Storage Temperature Range –65 to 150°C Lead Temperature (Soldering, 10 sec) 260°C Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. Note 2: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 300mV beyond the power supply, the input current should be limited to less than 10mA. Note 3: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power supply voltage and how many amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the package. The specified values are for short traces connected to the leads. ESD Rating Symbol Parameter Condition Minimum Level Unit HBM Human Body Model ESD ANSI/ESDA/JEDEC JS-001 2 kV CDM Charged Device Model ESD ANSI/ESDA/JEDEC JS-002 1 kV Thermal Information Package Type θJA θJC Unit 5-Pin SOT23 250 81 °C/W 8-Pin SOIC 158 43 °C/W 8-Pin TSSOP 191 44 °C/W 8-Pin MSOP 210 45 °C/W 14-Pin SOIC 120 36 °C/W 14-Pin TSSOP 180 35 °C/W

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps

Electrical Characteristics

All test condition is VS = 30V, TA = 25°C, RL = 10kΩ, unless otherwise noted. Symbol Parameter Conditions TA Min Typ Max Unit Power Supply VS Supply Voltage Range 3 36 V IQ Quiescent Current per Amplifier VS = 30V, TP2581 4.2 5.4 mA -40°C to 125°C 5.9 mA VS = 5V, TP2581 3.5 4.9 mA -40°C to 125°C 5.2 mA VS = 30V, TP2582/TP2584 3 4 mA -40°C to 125°C 4.5 mA VS = 5V, TP2582/TP2584 2.5 3.75 mA -40°C to 125°C 4 mA PSRR Power Supply Rejection Ratio VS = 3V to 36V 95 120 dB -40°C to 125°C 90 dB Input Characteristics VOS Input Offset Voltage VS = 30V, VCM = 0V to 28.5V -3 0.1 3 mV -40°C to 85°C -3.5 3.5 mV -40°C to 125°C -4 4 mV VS = 5V, VCM = 2.5V -3 0.1 3 mV -40°C to 125°C -4 4 mV VOS TC Input Offset Voltage Drift -40°C to 125°C 2 μV/°C IB Input Bias Current 25 pA -40°C to 85°C 80 pA -40°C to 125°C 1000 pA IOS Input Offset Current 25 pA IIN Different Input Current VS = 36V, VID = 36V 10 nA -40°C to 125°C 100 nA CIN Input Capacitance Differential Mode 5 pF Common Mode 2.5 pF Av Open-loop Voltage Gain 105 120 dB -40°C to 125°C 95 dB VCMR Common-mode Input Voltage Range (V-) (V+) – 1.5 V CMRR Common Mode Rejection Ratio VCM = 0V to 28V 105 130 dB -40°C to 125°C 100 dB

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps Output Characteristics VOH Output Swing from Positive Rail RLOAD = 10kΩ to VS/2 0.4 0.7 V -40°C to 125°C 1.2 V RLOAD = 2kΩ to VS/2 1.3 1.7 V -40°C to 125°C 2.5 V VOL Output Swing from Negative Rail RLOAD = 10kΩ to VS/2 0.2 0.5 V -40°C to 125°C 1 V RLOAD = 2kΩ to VS/2 0.8 1.2 V -40°C to 125°C 2 V ISC Output Short-Circuit Current 25 32 mA -40°C to 85°C 20 mA -40°C to 125°C 15 mA AC Specifications GBW Gain-Bandwidth Product 10 MHz SR Slew Rate G = 1, 10V step 8 V/μs Open Loop 6.5 8 V/μs -40°C to 125°C 5.5 V/μs tOR Overload Recovery 100 ns tS Settling Time, 0.1% G = 11, 2.5V step 0.8 μs Settling Time, 0.01% 1 μs PM Phase Margin VS = 36V, RL=10K, CL=100pF 60 ° GM Gain Margin VS = 36V, RL=10K, CL=100pF 15 dB Noise Performance EN Input Voltage Noise f = 0.1Hz to 10Hz 1.2 μVRMS eN Input Voltage Noise Density f = 1kHz 35 nV/√Hz f = 10kHz 17 nV/√Hz iN Input Current Noise f = 1kHz 2 fA/√Hz THD+N Total Harmonic Distortion and Noise f = 1kHz, G =1, RL = 10kΩ, VOUT = 6VRMS 0.0005 %

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps Tape and Reel Information Order Number Package D1 W1 A0 B0 K0 P0 W0 Pin1 Quadrant

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps Package Outline Dimensions SOT23-5

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps SOP8

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps TSSOP8

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps MSOP8

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps SOP14

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps TSSOP14

www.3peak.com Rev.A.3 TP2581/ TP2582/ TP2584 36V, 10MHz, 8V/ μs Op Amps IMPORTANT NOTICE AND DISCLAIMER Copyright© 3PEAK 2012-2023. All rights reserved. Trademarks. Any of the 思瑞浦 or 3PEAK trade names, trademarks, graphic marks, and domain names contained in this document /material are the property of 3PEAK. You may NOT reproduce, modify, publish, transmit or distribute any Trademark without the prior written consent of 3PEAK. Performance Information. Performance tests or performance range contained in this document/material are either results of design simulation or actual tests conducted under designated testing environment. Any variation in testing environment or simulation environment, including but not limited to testing method, testing process or testing temperature, may affect actual performance of the product. Disclaimer. 3PEAK provides technical and reliability data (including data sheets), design resources (including reference designs), application or other design recommendations, networking tools, security information and other resources "As Is". 3PEAK makes no warranty as to the absence of defects, and makes no warranties of any kind, express or implied, including without limitation, implied warranties as to merchantability, fitness for a particular purpose or non -infringement of any third -party’s intellectual property rights. Unless otherwise specified in writing, products supplied by 3PEAK are not designed to be used in any life -threatening scenarios, including critical medical applications, automotive safety -critical systems, aviation, aerospace, or any sit uations where failure could result in bodily harm, loss of life, or significant property damage. 3PEAK disclaims all liability for any such unauthorized use.