TP17 3PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 13
Technical content
Features
⚫ Supply Voltage: 4.5V to 36V ⚫ Rail to Rail Output ⚫ Bandwidth: 6 MHz ⚫ Slew Rate: 20V/μs ⚫ Excellent EMI Suppress Performance ⚫ Offset Voltage: ±100μV Maximum ⚫ Offset Voltage Temperature Drift: 2 μV/°C ⚫ Low Noise: 25 nV/√Hz at 1kHz ⚫ –40°C to 125°C Operation Temperature Range
Applications
⚫ Instrumentation ⚫ Active Filters, ASIC Input or Output Amplifier ⚫ Sensor Interface ⚫ Motor Control ⚫ Industrial Control
Description
The TP17 is newest high supply voltage amplifiers with low offset, low power and stable high frequency response. It incorporates 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 6 MHz bandwidth, 20V/μs slew rate and low distortion while drawing only 15 00μA of qu iescent current per amplifier. The input common-mode voltage range extends to V–, and the outputs swing rail -to-rail. The TP17 family can be used as plug -in replacements for many commercially available op -amps to reduce power and improve input/output range and performance. The combination of features makes the TP17 ideal choices for industrial control, instrumentation. Pin Configuration TP17 8-Pin SOIC (-S Suffix) Out NC ﹢In ﹣In ﹣Vs ﹢Vs NC NC
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps Table of Contents
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps
Revision History
2018/4/21 Rev.Pre Pre-Release Version 2018/10/5 Rev.0 Initial Vesion Order Information Order Number Operating Temperature Range Package Marking Information MSL Transport Media, Quantity TP17-SR -40 to 125°C 8-Pin SOIC TP17 XXXX Note 1
3 Tape and Reel, 4000
Note 1: XXXX identify the manufacture information.
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps Absolute Maximum Ratings Note 1 Parameters Rating Supply Voltage, (+VS)– (-VS) 40 V Input Voltage (-VS) – 0.3 to (+VS) + 0.3 Differential Input Voltage (+VS) - (-VS) Input Current: +IN, –IN Note 2 ±10mA Output Short-Circuit Duration Note 3 Infinite Maximum Junction Temperature 150°C Operating Temperature Range –40 to 125°C Storage Temperature Range –65 to 150°C Lead Temperature (Soldering, 10 sec) 260°C Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. Note 2: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 300mV beyond the power supply, the input current should be limited to less than 10mA. Note 3: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power supply voltage and how many amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the package. The specified values are for short traces connected to the leads. ESD Rating Symbol Parameter Condition Minimum Level Unit HBM Human Body Model ESD ANSI/ESDA/JEDEC JS-001 2 kV CDM Charged Device Model ESD ANSI/ESDA/JEDEC JS-002 1 kV Thermal Information Package Type θJA θJC Unit 8-Pin SOIC 158 43 °C/W
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps
Electrical Characteristics
All test condition is VS = 30V, TA = 25°C, RL = 10kΩ, unless otherwise noted. Symbol Parameter Conditions TA Min Typ Max Unit Power Supply VS Supply Voltage Range 4.5 36 V IQ Quiescent Current per Amplifier VS = 30V 1.5 2 mA -40°C to 125°C 3 mA PSRR Power Supply Rejection Ratio VS = 4.5V to 36V 105 130 dB -40°C to 125°C 100 dB Input Characteristics VOS Input Offset Voltage VS = 30V, VCM = 15V -100 50 100 μV -40°C to 85°C -400 400 μV -40°C to 125°C -600 600 μV VS = 25V, VCM = 12.5V -100 50 100 μV -40°C to 85°C -400 400 μV -40°C to 125°C -600 600 μV VS = 5V, VCM = 2.5V -150 50 150 μV -40°C to 85°C -500 500 μV -40°C to 125°C -600 600 μV VOS TC Input Offset Voltage Drift -40°C to 125°C 1 μV/°C IB Input Bias Current 25 pA -40°C to 85°C 80 pA -40°C to 125°C 1000 pA IOS Input Offset Current 25 pA IIN Different Input Current VS = 36V, VID = 36V 10 100 nA -40°C to 125°C 100 300 nA CIN Input Capacitance Differential Mode 5 pF Common Mode 2.5 pF Av Open-loop Voltage Gain VS = 30V, VOUT = 0.5V to 29.5V 120 130 dB -40°C to 125°C 105 dB VCMR Common-mode Input Voltage Range (V-) (V+) – 1.5 V CMRR Common Mode Rejection Ratio VCM = 0.5V to 28.5V 100 125 dB -40°C to 125°C 95 dB
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps Output Characteristics VOH Output Swing from Positive Rail RLOAD = 100kΩ to VS/2 5 15 mV -40°C to 85°C 30 mV -40°C to 125°C 40 mV RLOAD = 10kΩ to VS/2 50 80 mV -40°C to 85°C 120 mV -40°C to 125°C 130 mV VOL Output Swing from Negative Rail RLOAD = 100kΩ to VS/2 5 10 mV -40°C to 85°C 20 mV -40°C to 125°C 25 mV RLOAD = 10kΩ to VS/2 40 50 mV -40°C to 85°C 80 mV -40°C to 125°C 100 mV ISC Output Short-Circuit Current Source Current 20 32 mA Sink Current 15 25 mA AC Specifications GBW Gain-Bandwidth Product 6 MHz SR Slew Rate G = 1, 10V step 13 20 V/μs -40°C to 125°C 10 V/μs tOR Overload Recovery 100 ns tS Settling Time, 0.1% G = -1, 10V step 0.5 μs Settling Time, 0.01% 0.8 μs PM Phase Margin VS = 36V, RL=10K, CL=100pF 60 ° GM Gain Margin VS = 36V, RL=10K, CL=100pF 10 dB Noise Performance EN Input Voltage Noise f = 0.1Hz to 10Hz 2 μVRMS eN Input Voltage Noise Density f = 1kHz 25 nV/√Hz iN Input Current Noise f = 1kHz 2 fA/√Hz THD+N Total Harmonic Distortion and Noise f = 1kHz, G =1, RL = 10kΩ, VOUT = 6VRMS 0.0005 % Thermal Shutdown Thermal Shutdown temperature 170 °C Recover Temperature 150 °C
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps Tape and Reel Information Order Number Package D1 W1 A0 B0 K0 P0 W0 Pin1 Quadrant
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps Package Outline Dimensions SOIC-8
www.3peak.com Rev.0 TP17 36V, 6MHz, 20V/ μs Op Amps IMPORTANT NOTICE AND DISCLAIMER Copyright© 3PEAK 2012-2023. All rights reserved. Trademarks. Any of the 思瑞浦 or 3PEAK trade names, trademarks, graphic marks, and domain names contained in this document /material are the property of 3PEAK. You may NOT reproduce, modify, publish, transmit or distribute any Trademark without the prior written consent of 3PEAK. Performance Information. Performance tests or performance range contained in this document/material are either results of design simulation or actual tests conducted under designated testing environment. Any variation in testing environment or simulation environment, including but not limited to testing method, testing process or testing temperature, may affect actual performance of the product. Disclaimer. 3PEAK provides technical and reliability data (including data sheets), design resources (including reference designs), application or other design recommendations, networking tools, security information and other resources "As Is". 3PEAK makes no warranty as to the absence of defects, and makes no warranties of any kind, express or implied, including without limitation, implied warranties as to merchantability, fitness for a particular purpose or non -infringement of any third -party’s intellectual property rights. Unless otherwise specified in writing, products supplied by 3PEAK are not designed to be used in any life -threatening scenarios, including critical medical applications, automotive safety -critical systems, aviation, aerospace, or any sit uations where failure could result in bodily harm, loss of life, or significant property damage. 3PEAK disclaims all liability for any such unauthorized use.