TLRE1002A TOSHIBA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
TOSHIBA TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(TO2) TOSHIBA LED LAMP TLRE1002A(TO2), TLSE1002A(TO2), TLOE1002A(T02), TLYE1002A(TO2) TLPYE1002A(TO2), TLGE1002A(TO2), TLFGE1002A(TO2), TLPGE1002A(TO2) PANEL CIRCUIT INDICATOR Unit in mm e 2.0 X 1.25 X 1.1mm (L X W X H) 1 2 TLOE1002A (T02) Series cATHODE INDEX e InGaAeP LED LED CHIP POSITION > _ e@ ~=It can be manufactured high-luminosity of equipment or reduce aiumlel of electric power consumption by change in the high-luminosity v4 LED from general-luminosity one. 1.28) @ Colors : Red, Orange, Yellow, Pure Yellow, Green, Pure Green E34 = T e Can be mounted using surface mounter. i 0.40.2 | ap ee02 e Reflow soldering is possible. FA}: e Standard embossed taping 1 4mm pitch : T02 (3000 pes/ reel) 1. CATHODE to vgs 2. ANODE TOLERANCE : £0.1 mm e = Applications : As backlighting source for battery-powered equipment As pilot light for compact equipment JEITA _ In low-power electronic equipment, etc. Weight : 0.002g LINE-UP PRODUCT [FoREI002A | Red | _InGaaeP_ | TrSmi002A [Red | InGaneP | TLGE1002A InGaAeP TLPGEI002A 1 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) MAXIMUM RATINGS (Ta = 25°C) NAME CURRENT (DC) VOLTAGE DISSIPATION |TEMPERATURE|TEMPERATURE Ip (mA) VR (V) Pp (mW) Topr CC) Tstg CC) 25 —40~85 —40~100 ELECTRICAL CHARACTERISTICS (Ta = 25°C) MIN | TYP. | MAX MAX TroREizA | — [19 | 24 | Prrseio02A[— [19 | 24_| Ptuveio2a | — [20 [2a], | . PaupyEi002a | — | 20 | 24 | [TiaEi002a | — | 20 | 24 | PrLrGBi0028 | — | 20 | 24 | [ripomio02a | — | 2.1 | 24 | OPTICAL CHARACTERISTICS (Ta = 25°C) LUMINOUS INTENSITY _ EMISSION SPECTRUM PRODUCT Iv Peak Emission |.) Dominant NAME Wavelength Ap Wavelength Aq Min | Typ. | MAX MIN | TYP. | MAX | TYP. | MIN | TYP. | MAX Priveioo2a [272 [105 [— | ,, [= [seo [= [is [= ser[— | Propose [a7e[ is [— | [— [s2[— [im |—| sel — | [unit [med [mA] »m [am] am | mA | (Note): This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light. 2 2001-12-05
TOSHIBA TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02) TLRE1002A Ip - VF ly - Ip 2 “OOOO pap Ay 5 7 ee ey a e TTT YALEL ELE} 0 =e eee pees pC TI | a TYPE TTP PTY] ae oe 2ess eee e TTVEEEELLLELe 8 cr _
2 PALE 5 Vee eee
FORWARD VOLTAGE Vp (V) FORWARD CURRENT Ip (mA) _ RELATIVE LUMINOUS INTENSITY — Too “oo E | = 25°C PRA) ob cee Z z | g EERE] BCC | g 29 z 1 1) I Vt TT = 2 0.4 y cay 2 eee 2 LIT TI7T IVT TT eTti ti titty yy ett TIZTIN IT PLU eA NS a a) 20 4060 80-100 8s “soo 20640 600 = 700 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) Ip - Ta 40, » LITT TTT TTT I 2 4 ttt Titty = 30) Ss LLP TTT Ty 2} | PNET TT TT f& 11 T PT NI TTT 2 ft tit iNet | 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) S200 TEU
TOSHIBA TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02) TLSE1002A Ip - Vp Ivy - Ir i —===S m= To a Shee EO ~ ~ LZ e “CEE a 2 SSS aoe 4eeeeee Eg} i ===525====== ee cl 3 a ee oe ro 5 Al g EEEARSEEESES og OZ in Boome | TAI ATT LA AE 16.47 ~ 18 19 ~~=0~ SSD so EEE EHH FORWARD VOLTAGE Vp (V) 1 3 5 10 3050100 FORWARD CURRENT Ip (mA) Ivy — Te RELATIVE LUMINOUS INTENSITY — COCO ooo “TALL
2 Ip = 20mA
» KOT E (EEE ERE ee |
2 Pre 2 “_CCOMLLELLLL
3 os} J Zz i a Oa 2 tt Vivi tt tt ty Sof tt ttt tt tty e LLIALVETT ETT e LIITT TT ttt Tey et VELNELEE TE g a “COCOA L 2, Iti tt Xft te -20 0 20 40 60 80 100 580 600 620 640 660 680 7100 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) iT Too
2 Pope
E30) g : | e TITPNEE eCOP NCEE 2 - efit TEN TT
2 LTT TTTIT NT
s LLE TT TT yt | < % 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) 4 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) TLOE1002A 100, ir = Yr 500) WV — Ir ~< =e Tee Fo — [wee FREE eam eee LT g ®epp eee ee ee ee ea | . ! eeeeee coce sean II g PYLE esse eee g YS SSS SSeS ee a SESS SSeS SS 2 oA a ee a ee a ee a S a9 V4 anil Py? LIVE TTT yyy a i 18 19 2.0 21 22 23 0 3 5 10 30 30 100 FORWARD VOLTAGE Vp (V) FORWARD CURRENT Ip (mA) Iv -T RELATIVE LUMINOUS INTENSITY — Sess oe 2 ee ee ee eee | acse | | === ====S— 7 | ae ee | z 4F4+-41-}-+1 44+ 4 e LTT TTT TWAT TTI EERE wo Z aan eee
2 ESSE] ers ees =
2 Pea SSS 2
= oa tt tiv TT TN 1 | -20 0 20 40 60 80 100 540 560, 580 600 620 640 660 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) Ip - Ta 40) - LLET TT TT tty e Ji tty i tty s 30] es Titty tei 2 N\\ @ OPAL & [i |) NET e J PPT INE = wo ow § [TTT T EN! ar ee % 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) 5 2001-12-05
TOSHIBA TL(RE,SE,OE, YE, PYE,GE,FGE,PGE)1002A(T02) TLYE1002A Ip - VF Iv - IF ~ a e ‘a=
2 Pee EEE 2 SS
s “TEEPE rrr 2
5 PPI KEE Ef
g LLL || 2° PSS SESS Ee TMA IL
2 So |
- PPPPrPereeeer}| =? EES 1 1 3 5 10 30 «50 100 “7 18 19 2.0 21 22 23 FORWARD VOLTAGE Vp (V) FORWARD CURRENT Ip (mA) RELATIVE LUMINOUS INTENSITY — 10 ee Oak 1.0) WAVELENGTH 3 a a as Ge OO GO | Bos a e TT TEU TET yy BREET Pete ow DLO ee OO ee eee fe z | SESS OE eT on -20 0 20 40 60 80 100 flit Ti tsSPitid CASE TEMPERATURE Te (°C) WAVELENGTH A (nm)
0 Ip - Ta
- LLL TTT TT ty ew ti titi ty = 30) es LITT TTT Ty yy go TNT TT & [TT | NIT 3 fof Nb s {i tititrNXt “ Litt tt tt ty | 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) 6 2001-12-05
TOSHIBA TL(RE,SE,OE, YE, PYE,GE,FGE,PGE)1002A(T02) TLPYE1002A Ip - Vp ly - Ip 100, 2004 ee SSSSSSE= eo meec LUI TUTTI | a SS e “TPT rrr Po EA PZ) 2 é aa S Beer EL mI iii
2 Seo
F POVeeCee eS? EEE ii 18 19 2.0 21 22 23 ' 8 5 0 5050 r00 FORWARD CURRENT Ip (mA) FORWARD VOLTAGE Vy (V) I T RELATIVE LUMINOUS INTENSITY — ly — Te WAVELENGTH » BSS Og EAH se] E Bos eee ee ee ERR e EEE 2 were ti tt tt g
2 SS eof tT TT TT
BH eee] Ea 4 a LIT VET IT EEy
2 ETT TTT ea
-20 0 20 40 60 80 100 540 560 580 600 620 640 660 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) » LLET TIT IT TI ew titi ti ly = 30) es LITT TT ty tty # tN TTT & [iT NII 3 oe NS | gs [it ttirNe * LETT tt Tt tt I 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) 7 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE) 1002A(TO2) TLGE1002A 100; ir VP 200) W - IP ee SSSSSSE= eee lil | TTT | a B00 ee ee es > ee ees ee ee Ae g BEEZ Eo} eee aaa 2 CCC e Beer EL IIL TTI A ee a ea 2 SAS
2 TTTALCCELLLeel g LH ed fo 4
= 2 Sa LIVE LEE T EL set ir \\7 18 19 2.0 21 22 23 1 3 5 10 50 50 100 FORWARD VOLTAGE Vp (Vy FORWARD CURRENT Ip (mA) RELATIVE LUMINOUS INTENSITY — sees St aE , [\\ 2 3 A 2 5 PE RCC ee 2 (Pp Se 5 \\ § GES eS SSeS 2 a, e @CCCCCeCeeeeee ee -20 0 20 40 60 80 100 540 560 580 600 620 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) Ip - Ta 40) - ELELLT TTT TI ot tity tty e “TT TTT yy 2 N #1 tN NN - titi} Nt tt e Litt yt E Nt * Litt ttt | itt I 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) TTS 9007-12-05 _
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE) 1002A(TO2) TLFGE1002A Ip - Vp ly - Ir 100 | 200) ee SSSSSSE= eee FLT | a B00 2 ot e Po est se 4 - pt} tt | ppt tt ORT
5 BEEZ Eo} TIE A
fe eeeeP4eeeeee fe) A BSS EA 5s = } E HAA? Se LIVE EEE LETT yy sZt ii 18 19 2.0 21 22 23 ' 8 5 0 50 50 r00 FORWARD VOLTAGE Vp (Vy FORWARD CURRENT Ip (mA) RELATIVE LUMINOUS INTENSITY — 10 a a 10 WAVELENGTH | [ase | | | pee) yg LER APE z : | ee pa ce en ee ee eee 5
2 FeSeSe SS SSeeS 2
z 08 E 0.2) PC? “ES on -20 0 20 40 60 80 100 $9 ar 560 580 = 600 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) Ip — Ta - ELELLT TTT TI e Jt ttt itty yy e “TT TTT yy 2 N #1 tN NN & | lt] NELL e JILIN EU s 10) NO e Litt yt E Nt eit iti tt ii | 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) rc) 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) TLPGE1002A Ip - Ve lv - Ip 100, 304 “b= ESS, == TT Tom BERR SLI 30 2 y Fa I g s_—_ rz ri 2 “EESESSZES=SS FC OAI Cron
2 EERE REESE sg OI
& a 2 ee | 2 Al PEA PATTIE TT /, = * PILI VEL EEE] BA a ey FORWARD VOLTAGE Vp (V) 1 36 10 3050100 FORWARD CURRENT Ip (mA) oe _ oe RELATIVE WAVELENGIN - . = is a a a ZB og | ee ee ee ee ERECT te ol EL e [rr | oe ee PRESSES EWC 5s EER 2 “CPP yy a Ser yy s \\ sof PP ETAT geo SZ oo ee ee ot —20 0 20 40 60 80 100 820 <n 560 580 600 CASE TEMPERATURE Te (°C) WAVELENGTH A (nm) Ip - Ta 40; - ELELLT TTT TI ett iti tt et
2 TIT T PTT TT yy
# 1 TN EE & |) TINIE = ttt tT Nt = 10) NJ s [iti ttt NT “ Jt Tt tttt i | % 20 40 60 80 100 AMBIENT TEMPERATURE Ta (°C) 10 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) TLOE1002A SERIES [RADIATION PATTERN] 802 a Toe 30° 80% x ms 30° HOR of FEES. TESS ETINS, SEERA, TRESS, SLRS OBOE HIRES IS APTOS TERESA i 2007-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) PACKAGING These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air before soldering and they should therefore be stored under the following conditions : 1. This moisture proof bag may be stored unopened within 12 months at the following conditions. Temperature : 5~30°C Humidity : 90% (max) 2. After opening the moisture proof bag, the devices should be assembled within 168 hours in an environment of 5°C to 30°C /60% RH or below. 3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to pink) or the expiration date has passed, the devices should be baked in taping with reel, After baking, use the baked devices within 72 hours, but perform baking only once. Baking conditions : 60 + 5°C, for 12 to 24 hours. Expiration date : 12 months from sealing date, which is imprinted on the same side as this label affixed. 4, Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting. Furthermore, prevent the devices from being destructed against static electricity for baking of it. 5. If the packing material of laminate would be broken, the airtightness would deteriorate. Therefore, do not throw or drop the packed devices. MOUNTING METHOD SOLDERING © Reflow soldering Temperature profile { —1— + 10s max tot = i ot € , | 140-160°C | Be ~ as . . Qe f 1 4°C/s 2s Pin 4°c/g | max 28 | max i ~ 60-1208 Time (s) — @ Please perform the first reflow soldering within 168h after opening the package with reference to the above temperature profile. 12 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) @ Second time reflow soldering In case of second reflow soldering, it should be performed within 168h after first reflow under the above conditions. Storage conditions before second reflow soldering : 30°C, 60% RH or lower © Do not perform flow soldering. @ Make any necessary soldering corrections manually. (Do not do this more than once for any given pin.) Soldering iron : 25 W Temperature : no more than 300°C Time : within 3s @ Recommended soldering pattern peed Ode Unit in mm EV EFTS H i POST SOLDER CLEANING When cleaning after soldering is needed, the following condition must be adhered to. Cleaning solvents : AK225 or Alcohol Temperature : 50°C (max) for 30s (max) or 30°C (max) for 3 minutes (max) Ultrasonic : 8300 W max PRECAUTION FOR MOUNTING Do not apply force to the plastic part of the LED in high temperature conditions. Do not apply friction using a hard materials for avoid injuring the plastic part of the LED. Keep the LED away from any other parts when assembling boards into the set. TAPING SPECIFICATIONS This specification lays out the 4mm pitch embossed-tape packing requirements for 2.0mm (L) X 1.25 mm (W) X 1.1mm (H) size surface-mount LED lamp. 1. Product Naming System The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (this method, however does not apply to products whose electrical characteristics differ from standard Toshiba specifications) (1) Tape Type : T02 (4mm pitch) (2) Example TLRE1002A TO 2) Tape Type Toshiba Product No. 13 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) 2. Related Matter (1) Electro-optical Characteristics Please refer to the each technical datasheet for electro-optical characteristics of tape packed products (2) Handling Precautions Tape material protected against static electricity. However, static electricity may occur depending on quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when peeling a tape cover. a) In process, taping materials may sustain an electrostatic charge, use an ionizer to neutralize the ions. b) For transport and temporary storage of devices, use containers (boxes, jigs, bags) that are made of anti-static materials or of materials that dissipate electrostatic electricity. 3. Tape Dimensions (Unit in mm) SYMBOL | DIMENSION | TOLERANCE SYMBOL | DIMENSION | TOLERANCE a ee ee Pt [05 [£0005 £0.05 Po Ko D
1 Pp +t bt
! l 4-4-4 |: e}-—e}-—fa + i i LH [P| Dy POLARITY Ao 14 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(TO2) 4. Reel Dimensions Unit in mm $180 + w4t1 || 9403 ¢21 $0.8 $18 + 0.5 i > ———WN ES SA RY. L \\ 240.5 5. Leader and Trailer ponsunnnngessssessena moocossocesal 2] L _over 40mm _ | over 40mm Ct Leader : 190 mm (min) r (poo ——$— c - — 15 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) 6. Packing Form (1) Number of Devices per Reel and Carton 3000 devices 15000 devices (2) Packing : Silica gel and reel are packed into sealed aluminum pack. 7. Notation Method (1) Example : TLRE1002A (T02) P/N: NOTE Lot Number (rank symbol) (2) Label location : @ Reel © Carton Tape Feed Direction i \\ | | ) abel position Label position @ Aluminum pack : Attached to center of one side 16 2001-12-05
TOSHIBA TL(RE,SE,OE, YE,PYE,GE,FGE,PGE)1002A(T02) RESTRICTIONS ON PRODUCT USE ooo7o7eac @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 7 2001-12-05