TLP4202G

TLP4202G_07 TOSHIBA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

TOSHIBA Photocoupler Photorelay TLP4202G Telecommunication Measurement Equipment Security Equipment FA The Toshiba TLP4202G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a SOP package. This 2-form-B (NC) photorelay features a withstanding voltage of 350 V.

• 8-pin SOP (2.54SOP8): Height = 2.1 mm, pitch = 2.54 mm
• Normally closed (2-form-B) device
• Peak off-state voltage: 350 V (min)
• Trigger LED current: 3 mA (max)
• On-state current: 90 mA (max)
• On-state resistance: 50 Ω (max)
• Isolation voltage: 1500 Vrms (min)
• UL Recognized: UL1577, File No. E67349 Pin Configuration (top view) Unit: mm JEDEC ― JEITA ― TOSHIBA 11-10H1 Weight: 0.2 g (typ.) 1 1, 3 : Anode 2, 4 : Cathode 5 : Drain D1 6 : Drain D2 7 : Drain D3 8 : Drain D4

Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Forward current IF 50 mA Forward current derating (Ta > = 25°C) ΔIF/°C −0.5 mA/°C Peak forward current (100 μs pulse, 100 pps) I FP 1 A Reverse voltage VR 5 V LED Junction temperature Tj 125 °C Off-state output terminal voltage VOFF 350 V On-state current ION 90 mA On-state current derating (Ta > = 25°C) ΔION/°C −0.9 mA/°C Detector Junction temperature Tj 125 °C Storage temperature range Tstg −55 to 125 °C Operating temperature range Topr −40 to 85 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 1 min, R.H. < = 60%) (Note 1) BV S 1500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pins 1, 2, 3 and 4 ar e shorted together, and pins 5, 6, 7 and 8 are shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage VDD ⎯ ⎯ 280 V Forward current IF 5 ⎯ 25 mA On-state current ION ⎯ ⎯ 90 mA Operating temperature Topr −20 ⎯ 65 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guide line respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF I F = 10 mA 1.0 1.15 1.3 V Reverse current IR V R = 5 V ⎯ ⎯ 10 μA LED Capacitance C T V = 0, f = 1 MHz ⎯ 30 ⎯ pF Off-state current IOFF V OFF = 350 V, IF = 5 mA ⎯ ⎯ 1 μA Detector Capacitance C OFF V = 0, f = 1 MHz, IF = 5 mA ⎯ 30 ⎯ pF

Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Trigger LED current IFC I OFF = 10 μA ⎯ 1 3 mA Return LED current IFT I ON = 90 mA 0.1 ⎯ ⎯ mA On-state resistance RON I ON = 90 mA ⎯ 27 50 Ω Isolation Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Capacitance input to output CS V S = 0, f = 1 MHz ⎯ 0.8 ⎯ pF Isolation resistance RS V S = 500 V, R.H. < = 60% 5 × 10 ⎯ Ω AC, 1 min 1500 ⎯ ⎯ AC, 1 s, in oil ⎯ 3000 ⎯ Vrms Isolation voltage BVS DC, 1 min, in oil ⎯ 3000 ⎯ Vdc Switching Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Turn-on time tON ⎯ 0.25 0.5 ms Turn-off time tOFF RL = 200 Ω VDD = 20 V, IF = 5 mA (Note 2) ⎯ 0.5 1 ms Note 2: Switching time test circuit 6, 8 tOFF tON 10% 90% VOUT IF 1, 3 VDD VOUT RL 5, 7 2, 4 IF

Ambient temperature Ta (°C) IF – Ta Allowable forward current I F (mA) Ambient temperature Ta (°C) ION – Ta Allowable on-state current I ON (mA) Forward voltage V F ( V ) IF – VF Forward current I F ( m A ) −20 100 120 100 80 60 40 20 0 Ta = 25°C 100 0.3 0.1 −20 160 120 100 80 60 40 20 0 120

VOFF = 350 V IF = 5 mA −40 3000 100 80 60 40 20 0 −20 300 100 1000 tON tOFF VDD = 20 V, RL = 200 Ω IF = 5 mA Ambient temperature Ta (°C) RON – Ta On-state resistance R ON ( Ω) Ambient temperature Ta (°C) IOFF – Ta Off-state current I OFF ( n A ) Ambient temperature Ta (°C) IFC – Ta Trigger LED current I FC (mA) ION – VON On-state current I ON ( m A ) On-state voltage V ON (V) Switching time t ON, tOFF ( μs) Input current I F ( m A ) tON, tOFF – IF Ambient temperature Ta (°C) tON, tOFF – Ta Switching time t ON, tOFF ( μs) 1 100 Ta = 25°C VDD = 20 V, RL = 200 Ω tON tOFF 30 50 10 3 5 300 3000 300 100 1000 Ta = 25°C −4 −1 0 4 1 150 −150 −50 100 −100 −2 −3 2 3 ION = 90 mA t < 1 s −40 100 80 60 40 20 0 −20 ION = 90 mA t < 1 s −20 0 20 40 80 100 60 −40

RESTRICTIONS ON PRODUCT USE 20070701-EN

• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
• The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dus t or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
• Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.