TL8 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

TiMOTION’s TL8 series columns are designed with a 3 stage cylindrical appearance and built-in motors. It was designed primarily for use in medical applications. The TL8 provides stable vertical lifting. This makes the engineering design process easier and safer by replacing older style lifting mechanisms that use many moving stages and have pinch points. The TL8 is suitable for the medical bed applications. General Features Max. load 2,000N (push) Max. dynamic bending moment 500Nm Max. static bending moment 1,000Nm Max. speed at max. load 9.6mm/s Max. speed at no load 32.6mm/s Retracted length ≥ (Stroke/2) + 150mm IP rating IPX6 Dimension of outer tube Ø124mm round Stages 3-stage Stroke 200~400mm Certificate IEC60601-1-2, IEC60601-1, ES60601-1, EMC Output signals Hall sensors Voltage 24V DC (PTC) Color Matte silver, black Operational temperature range +5°C~+45°C The TL8 can only be used in pairs; single column usage is not recommended. The TL8 is recommended for push applications only; pull conditions are not advised. Multiple cable exit options Product Segments

  • Care Motion

1 Parameters above are from tested average, please refer to approval drawing for final value. 2 The current & speed are tested with 24VDC motor. Load and Speed CODE Load (N) Bending Moment (Nm) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Dynamic Static No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (5200RPM) A 2000 500 1000 2000 1.7 4.0 16.5 9.6 B 1000 250 500 1000 1.7 3.6 32.6 19.9 TL8 series Standard Dimensions (mm) Drawing 134 4-M8 4-M8ø124 Retracted Length 124 124

A B 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 200 400 600 800 1000 1200 1400 1600 1800 20000 4.5 A B 5.0 0.0 10.0 15.0 20.0 25.0 30.0 35.0 200 400 600 800 1000 1200 1400 1600 1800 20000 Motor Speed (5200RPM) Performance Data (24V DC Motor) TL8 series Speed (mm/s) Speed vs. Load Load (N) Current (A) Current vs. Load Load (N)

Version: 20220712-L Load and Speed Voltage Output Signals IP Rating Functions for Limit Switches See page 6 Cable Exit See page 6 Connector See page 6 5 = 24V, PTC 200 - 400 Minimum retract length needs to ≥ (stroke/2) +150 0 = Without 2 = Hall sensors*2 1 = Without 2 = IPX4 3 = IPX6 Cable Length 1 = Top end socket 0 = Without 1 = DIN 6P , socket 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Stroke (mm) See page 2 Color Special Functions for Spindle Sub- Assembly 1 = Black (With black cable set) 2 = Matte silver (With 428C color cable set) 3 = Matte silver (With black cable set) 4 = Black (With 428C color cable set) 0 = Without (standard) Note 1 The TL8 is designed especially for push applications, not suitable for pull applications. Retracted Length (mm) See page 6

Version: 20220712-L Load and Speed Voltage Output Signals IP Rating Functions for Limit Switches See page 6 5 = 24V, PTC 200 - 400 Minimum retract length needs to ≥ (stroke/2) +150 0 = Without 2 = Hall sensors*2 1 = Without 2 = IPX4 3 = IPX6 Cable Length (mm) 2 = Bottom side cable 3 = Top side cable 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 1750 7 = Straight, 2000 1 = DIN 6P , socket 2 = Tinned leads F = DIN 6P , 180° plug G = molex 8P 90° H = molex 8P 180° 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Stroke (mm) See page 2 Color Special Functions for Spindle Sub- Assembly 1 = Black (With black cable set) 2 = Matte silver (With 428C color cable set) 3 = Matte silver (With black cable set) 4 = Black (With 428C color cable set) 0 = Without (standard) Note 1 The TL8 is designed especially for push applications, not suitable for pull applications. Retracted Length (mm) See page 6 Cable Exit See page 6 Connector See page 6

Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. 1. Retracted length needs to ≥ A+B Retracted Length (mm) B. Cable Exit CODE Top End Socket Bottom Side Cable Top Side Cable 1 - - - 2 - - - 3 - +20 - A. Load (N) 1000 2000 S / 2 + 150 Note 1 D ifferent retracted length is relative to different bending moment, See page 2 . 1 = DIN 6P , socket G = molex 8P 90° 2 = Bottom side cable 1 = DIN 6P , socket H = molex 8P 180° 3 = Top side cable 2 = Tinned leads F = DIN 6P , 180° plug Connector Cable Exit