TA29AC TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

  • Industrial Motion TA29AC series TiMOTION's TA29AC is a linear actuator with an AC/DC power supply integrated into the housing that affords a maximum 4000N force (push/pull). It is controlled by 1 neutral wire and 2 line wires (extension and retraction), making it a powerfully practical means to automate the ventilation system in livestock farming. General Features Max. load 4,000N (push/pull) Max. speed at max. load 4.5mm/s Max. speed at no load 9.5mm/s Retracted length > 302mm (depending on chosen options) IP rating IP66W Stroke 25~1000mm Output Signals POT Voltage 110~240V AC Color Black, grey Operational temperature range +5°C~+45°C

(mm) Drawing Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested when the actuator is extending under push load. 3 Standard stroke: Min. 25mm, Max. please refer to below table. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load With Load No Load With Load 220V AC 220V AC 220V AC 220V AC Motor Speed (5200RPM, Duty Cycle 10%) M 2500 2500 1000 2500 0.6 1.2 9.5 6.5 N 4000 4000 4000 0.4 1.2 5.5 4.5 CODE Load (N) Max Stroke (mm) M ≤ 2500 1000 N ≤ 4000 600 263 Retracted Length 122 52.2 6.2 12.2 ø10.2 22.6 ø10 8.2

Motor Speed (5200RPM) Performance Data (220V AC Motor) TA29AC series 1.0 0.0 2.0 3.0 4.0 10.0 6.0 7.0 8.0 9.0 5.0 0 1000 2000 3000 4000 4500500 1500 2500 3500 M N Speed (mm/s) Speed vs. Load Load (N) NM 0.2 0.0 0.4 0.6 0.8 1.4 1.2 1.0 0 1000 2000 3000 4000 4500500 1500 2500 3500 Current (A) Current vs. Load Load (N)

Version: 20230724-C Load and Speed See page 2 Voltage Color Output Signals See page 7 Special Functions for Spindle Sub- Assembly IP Rating Brake Connector See page 7 U = 110-240V AC 1 = Black 2 = Pantone 428C 0 = Without 1 = POT 0 = Without (Standard) 2 = Standard push only 1 = Without 2 = IP54 3 = IP66 5 = IP66W M = Motor brake 2 = Tinned leads Stroke (mm) Cable Length (mm) See page 2 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 Rear Attachment (mm) See page 6 Front Attachment (mm) See page 6 Functions for Limit Switches See page 7 3 = Aluminum, slotless, hole 10.2 4 = Aluminum, slotless, hole 12.2 1 = Two switches at full retracted / extended positions to cut current Retracted Length (mm) See page 5 Direction of Rear Attachment (Counterclockwise) See page 6 1 = 90° 2 = 0°

  1. Calculate A+B+C+D = Y 2. Retracted length needs to ≥ Stroke+Y 3. Retracted length needs to > 302mm Retracted Length (mm) C. Special Bunctions for Spindle Sub-Assembly 0 - 2 +6 D. Output Signal 0 - 1 +20 Stroke (mm) Load (N) 25~150 +10 151~200 +18 201~250 +18 251~300 +23 301~350 +23 351~400 +28 401~450 +33 451~500 +38 501~550 +43 551~600 +48 Front Attach. Rear Attach. 3, 4 3, 4 +112

3 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 10.2 4 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 12.2 Rear Attachment (mm) 3 = Aluminum, slotless, hole 10.2 4 = Aluminum, slotless, hole 12.2 Front Attachment (mm) ø10.2 21 26 6.112.2 ø12.2 21 26 6.112.2 ø10.2 ø26 ø12.2 ø26 Direction of Rear Attachment (Counterclockwise) 1 = 90° 2 = 0° Hole 90º Hole

The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. 2 = Tinned leads Connector Without T-Smart Port Number Functions for Limit Switches Wire Color Wire Gauge (AWG) Position Feedback 0. Without 1. POT (Power) Limit switches cut off the acutator

  • Black 18 Live (EXT+) Live (EXT+)
  • ● White 18 Live (RET+) Live (RET+)
  • Green 18 Neutral Neutral (POT) Limit switches cut off the acutator
  • ● White 26 - V-in
  • Grey 26 - V-out (signal)
  • Brown 26 - GND Wire Definition