TL5

TL5 TIMOTION | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

TiMOTION’s TL5 series columns are designed with an extruded steel square appearance for use in ergonomic furniture applications. Our economical TL5 provides stable vertical lifting. This makes the engineering design process easier and safer by replacing older style lifting mechanisms that use many moving stages and have pinch points. The 3 stage telescopic design enables a greatly reduced retracted height and provides an increased stroke length while ensuring a high degree of stability. General Features Max. load 800N (push) Max. speed at max. load 20mm/s Max. speed at no load 36mm/s Retracted length 560mm Dimension of outer tube 120*70mm rectangular Stages 3-stage Stroke 675mm Output signals Hall sensors Voltage 24V DC, 24V PTC Current at rated load 5A Color Black, white, grey, or special grey Inline column TL5 series Product Segments

• Ergo Motion

(mm) Drawing 560 35 120 70 4-M6 4-M10 Stroke + Retracted Length Note 1 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor speed (3800RPM) A 500 500 2.5 4.0 36.0 20.0 Motor speed (5200RPM) B 800 1000 2.5 5.0 32.0 20.0

Motor speed (3800RPM) Performance Data (24V DC Motor) TL5 series A 10.0 0.0 20.0 30.0 40.0 60.0 50.0 0 200 400 600 800 1000100 300 500 700 900 Speed (mm/s) Speed vs. Load Load (N) A 1.0 0.0 2.0 3.0 4.0 6.0 5.0 0 200 400 600 800 1000100 300 500 700 900 Current (A) Current vs. Load Load (N)

Motor speed (5200RPM) Performance Data (24V DC Motor) TL5 series B 10.0 0.0 20.0 30.0 40.0 60.0 50.0 0 200 400 600 800 1000100 300 500 700 900 Speed (mm/s) Speed vs. Load Load (N) B 1.0 0.0 2.0 3.0 4.0 6.0 5.0 0 200 400 600 800 1000100 300 500 700 900 Current (A) Current vs. Load Load (N)

Version: 20230207-I Load and Speed See page 2 Voltage Tube Color Wiper Color Output Signals Plug See page 6 Cable Exit See page 6 Cable Length (mm) 2 = 24V DC 5 = 24V DC, PTC. See page 6 1 = Black, RAL 9005 2 = White, RAL 9016 3 = Grey, RAL 9006 4 = Special grey, RAL 9022 1 = Black 2 = White 3 = Grey 0 = Without 2 = Hall sensor*2 1 = DIN 6P , 90° plug 2 = Tinned leads E = Molex plug 8P F = DIN 6P , 180° plug 1 = From the top 2 = From the bottom 1 = Straight, 500 3 = Straight, 1000 4 = Straight, 1500 Stroke (mm) Retracted Length (mm) 675 (Standard) 560 (Standard) Functions for Limit Switches See page 6 1 = Two switches at full retracted / extended positions to cut current Note 1 The TL is designed especially for push applications, not suitable for pull applications.

Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 5 = 24V DC, PTC 1 = DIN 6P , 90° plug 1 = From the top 2 = Tinned leads 2 = From the bottom E = Molex plug 8P F = DIN 6P , 180° plug Plug Cable Exit Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.