TFS280R

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfs 280r.doc Version 1.1 07.03.2008 VI TELEFILTER Filter specification TFS 280R 1/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement condition Ambient temperature: 22 ° C Input power level: 0 dBm Terminating impedance: * Input: 67 Ω || -9.5 pF Output: 163 Ω || -6.8 pF Characteristics Remark: The nominal frequency f N is fixed at 280 MHz. The insertion loss a e is defined as loss value determined at f N. Reference level for the relative attenuation a rel of the TFS 280R is the insertion loss a e. All specified data are met within the operating temperature range. coefficient of frequency TC f in the operating temperature range and due to a production tolerance for the centre frequency f c. D a t a typ. value tolerance / limit Insertion Loss a e 10,4 dB max. 12 dB Nominal Frequency f N 280 MHz Relative Attenuation a rel fN ... f N ± 7,5 MHz 0,5 dB max. 1 dB fN ± 7,5 MHz ... fN ± 8,5 MHz 1,5 dB max. 3 dB fN ± 15 MHz ... fN ± 17 MHz 20 min. 10 dB fN ± 17 MHz ... fN ± 100 MHz 42 min. 40 dB Group Delay Ripple fN - 7,5 MHz ... fN + 7,5 MHz 30 max. 40 ns Operating Temperature Range OTR - - 40° C ... + 85° C Storage Temperature Range - - 40° C ... + 85° C Temperature Coefficient of Frequency TC f ** - 87 ppm/K - Input Power Level - max. 15 dBm *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) ∆ f(Hz) = TC f(ppm/K) x (T-T0) x f To (MHz) Generated: Checked / Approved:

Filename: tfs 280r.doc Version 1.1 07.03.2008 VI TELEFILTER Filter specification TFS 280R 2/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filter characteristic Construction and pin connection (All dimensions in mm) 7 5 1 3 1,8 Max. 2,54 0,1 1,1 1,1 120° 0,64 5 -0,10 +0,15 1 3 Date code Test circuit SAW 1:4 3 1,4,5,8 280R

• W10

1 Ground

2 Input RF Return

3 Input

4 Ground

5 Ground

6 Output

7 Output

8 Ground

Date code: Year + week W 2008 X 2009 A 2010 ... 220 232 244 256 268 280 292 304 316 328 340 -60 -54 -48 -42 -36 -30 -24 -18 -12 frequency in MHz magnitude in dB 270 272 274 276 278 280 282 284 286 288 290 -5 frequency in MHz magnitude in dB 270 272 274 276 278 280 282 284 286 288 290 0.38 0.41 0.44 0.47 0.5 0.53 0.56 0.59 0.62 0.65 0.68 frequency in MHz delay in µs

Filename: tfs 280r.doc Version 1.1 07.03.2008 VI TELEFILTER Filter specification TFS 280R 3/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks eac h plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respec tively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 ° C to 125° C / 30 min. each / 1 0 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice ma x.; for temperature conditions, please refer to the at tached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 – 3, with exception of value f or N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN Marker Typ Date Code Ko t A C N W 1 W 2 The minimum bending radius is 45 mm. Tape (all dimensions in mm) W : 12,00 Po : 4,00 Do : 1,50 E : 1,75 F : 5,50 G(min) : 0,75 P2 : 2,00 P1 : 8,00 D1(min) : 1,50 Ao : 5,30 Bo : 5,30 Ct : 9,5 Reel (all dimensions in mm) A : 330 W1 : 12,4 W2(max) : 18,4 N(min) : 50 C : 13,0

Filename: tfs 280r.doc Version 1.1 07.03.2008 VI TELEFILTER Filter specification TFS 280R 4/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30° C to 217° C) less than 3° C/ second > 100° C between 300 and 600 seconds > 150° C between 240 and 500 seconds > 217° C between 30 and 150 seconds Peak temperature max. 260° C Time within 5° C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50° C) less than 6° C/second Time from 30° C to Peak temperature no greater than 300 seconds Temperature / ° C Time / s max. 260° C 217° C 10 ... 30 s 30 ... 150 s max. 300 s Chip-mount air reflow profile

Filename: tfs 280r.doc Version 1.1 07.03.2008 VI TELEFILTER Filter specification TFS 280R 5/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. History Version Reason of Changes Name Date 1.0 - generate specification Chilla 12.02.2008 1.1 - created filter specification Chilla 07.03.2008 - added terminating impedances - changed insertion loss - added typical values - added temperature coefficient of frequency - corrected for pinning - added filter characteristic - added test circuit