TFS380E VECTRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Filename: tfs380e.doc version 1.1 20.02.2003 VI TELEFILTER Filter Specification TFS 380E 1/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to makechanges to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement condition Ambient temperature: 23 C Input power level: 0dBm Terminating impedance at fc *: input:1,00k // -5,1 pF output:1,07k // -4,6 pF Characteristics Remark: The reference level for the relative attenuation a rel of TFS 380E is the minimum of the pass band attenuation a min. This value is defined asthe insertion loss a e. The centre frequency f c is the arithmetic mean value of the upper and lower frequencies at the 1 dB filter attenuation level relativeto the insertion loss a e. The given values for the relative attenuation a rel and the group delay ripple haveto be reached at the frequencies given below, even if the centre frequency f c is shifted due to the temperature coefficient of frequency TC f in the operating temperature range and due to a production tolerance for the centre frequency f c. D a t a typ. value limit Insertion loss ae = amin 15 dB max.17dB Nominal frequency fN - 380 MHz Centre frequency fc 380 MHz - Relative attenuation arel fN ... f N ± 2,025MHz 0,4dB max.1dB fN ± 2,5kHz... f N ± 3 MHz 4 dB min.3dB fN ± 3,0MHz... f N ± 3,25MHz 13 dB min.10dB fN ± 3,25MHz... f N ± 3,5MHz 23 dB min.20dB fN ± 3,5MHz... f N ± 5 MHz 34 dB min.30dB fN ± 5MHz... f N ± 100 MHz 45 dB min.40dB Group delay ripple in f N ± 2,025MHz 48 ns max.100ns Operating temperature range - 0 C...+ 70 C Storage temperature range - - 35 C.. + 85 C Temperature coefficient TC ** - 0,04 ppm/K² - Frequency inversion temperature T0 30 °C - *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team **) f(Hz) = TCf(ppm/K) x (T-T0)² x fTo(MHz) generated: checked / approved:

Filename: tfs380e.doc version 1.1 20.02.2003 VI TELEFILTER Filter Specification TFS 380E 2/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to makechanges to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Construction and pin connection (All dimensions in mm) 9,3 Max. 1 2 3 678 7,1 0,10 0,8 2,54 ±0,12,54 ±0,1 1 2 3 678 R08 Date code 1 ground 2 ground 3 ground 4 output 5 output rf return 6 ground 7 ground 8 ground 9 input 10 input rf return date code year + week N 2001 P 2002 R 2003 ... 50 test circuit 1,2,3,5,6,7,8,10 SAWC1 L1 4

Filename: tfs380e.doc version 1.1 20.02.2003 VI TELEFILTER Filter Specification TFS 380E 3/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to makechanges to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II,embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min 300 mm reel of empty components at start including leader: min 500 mm trailer min 300 mm D o Po E F W EMBOSSED CARRIER TAPE COVER TAPE G P 2 Bo A o D 1 Tape (all dimensions in mm) W : 16 ± 0,3 Po : 4 ± 0,1 Do : 1,5 + 0,1 E : 1,75 ± 0,1 F :7,5 ± 0,1 G (min) : 0,60 P2 : 2 ± 0,1 P1 : 8 ± 0,1 D1(min) : 1,5 Ao : 5,30 ± 0,1 Bo : 9,70 ± 0,1 CT CT : 13,5 ± 0,1 A C N W 1 W 2 Reel (all dimensionsinmm): A :330 W1 : 16,40+2,0 W2 (max) : 22,4 N (min): 50 C : 13,0 +0,5/-0.2 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.

Filename: tfs380e.doc version 1.1 20.02.2003 VI TELEFILTER Filter Specification TFS 380E 4/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to makechanges to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Air reflow temperature conditions 1st and 2nd air reflow profile Name: pre-heatingperiods main-heating periods peak temperature Temperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °C Time: 60 sec. - 90 sec. 20 sec. - 25 sec. Chip-mount air reflow profile time / sec. temperature / °C 100 120 140 160 180 200 220 240 260 0 20 40 60 80100120140160180200220240 Table for temperature vs. time during the air reflow process Tolerance oftemperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120

Filename: tfs380e.doc version 1.1 20.02.2003 VI TELEFILTER Filter Specification TFS 380E 5/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to makechanges to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. History VersionReason of Changes Name Date 1.0 generate specification Pfeiffer 04.02.2003 1.1 add typical values and terminating impedance Pfeiffer 20.02.2003