TFS140E VECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
tfs140e.doc version 1.3 06.01.02 VI TELEFILTER Filter Specification TFS 140E - 1/4 VI TELEFILTER Vectron Technologies, Inc. Potsdamer Straße 18
267 Lowell Road
Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement Condition Ambient Temperature: Input Power Level: dBm Terminating Impedances: for Input: 860 Ω - 1,2 pF for Output: 860 Ω - 1,2 pF Characteristics Remark: Reference level for the relative attenuation arel of the TFS 140 E is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 140,455 MHz without tolerance. The given values for the relative attenuation arel have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo. D a t a typ. Value Variation/ Limitation Insertion Loss ae max dB (Reference Level) Nominal Frequency fN 140,455 MHz Relative Attenuation arel fN ± 25 kHz max dB fN ± 75 kHz ... fN ± 125 kHz min dB fN ± 125 kHz ... fN ± 455 kHz min dB @ fN ± 455 kHz min dB Intermodulation (third order IM products) Intermodulation in the composit signal by fN ± 60 kHz and fN ± 120 kHz each of – 20 dBm max. -88 dBm Operating Temperature Range Storage Temperature Range Temperature Coefficient TC - 0,036 ppm/K2 Frequency Inversion Temperature + 25 °C Generated: Checked / Approved:
tfs140e.doc version 1.3 06.01.02 VI TELEFILTER Filter Specification TFS 140E - 2/4 VI TELEFILTER Vectron Technologies, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Construction and Pin Configuration (All Dimensions in mm) Remark: Only in the development stage the name of the filter is TFD 140 E. TFS 140 E tft L5 R0.15 Pin 4 - Output Pin 5 - Output RF Return Pin 9 - Input Pin 10 - Input RF Return Pin 1,2,3,6,7,8 - Ground 1,2,3,6,7,8
tfs140e.doc version 1.3 06.01.02 VI TELEFILTER Filter Specification TFS 140E - 3/4 VI TELEFILTER Vectron Technologies, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 30g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration:
10 Hz to 500 Hz, 0,075 mm or 1g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
- Damp heat: 90 % to 95 % rel. humidity, 40 °C, 10 days; (steady state) DIN IEC 68 - 2 - 3 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4; Packing Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 1700 Do Po E F W EMBOSSED CARRIER TAPE COVER TAPE G P 2 Bo A o 21,4 ± 0,1 D 1 Tape (all dimensions in mm) W : 24 ± 0,3 Po : 4 ± 0,1 Do : 1,5 + 0,5 E : 1,75 ± 0,1 F : 11,5 ± 0,1 G (min) : 0,75 P2 : 2 ± 0,1 P1 : 12 ± 0,1 D1(min) : 1,5 Ao : 7,1 ± 0,2 Bo : 13,9 ± 0,2 D1 : 1,5 + 0,5 A C N W 1 W 2 Reel (all dimensions in mm): A : 330 W1 : 24,4 +2 W2 (max) : 30,4 N (min) : >= 90 C : 13 ± 0,25 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
tfs140e.doc version 1.3 06.01.02 VI TELEFILTER Filter Specification TFS 140E - 4/4 VI TELEFILTER Vectron Technologies, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Air reflow temperature conditions 1st and 2nd air reflow profile Name: pre-heating periods main-heating periods peak temperature Temperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °C Time: 60 sec. - 90 sec. 20 sec. - 25 sec. Chip-mount air reflow profile time / sec. temperature / °C 100 120 140 160 180 200 220 240 260 100 120 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 140 160 150 161 160 164 170 170 180 180 103 190 205 121 195 230 134 200 255 143 205 230 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120