TFS1400

TFS1400 VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfs 1400.doc Version 1.4 09.06.2008 Vectron International Filter specification TFS 1400 1/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to ma ke changes to the product(s) and/or information contained herein without Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedance: * Input: 200 Ω || -0,65 pF Output: 75 Ω Characteristics Remark: The nominal frequency f N is fixed at 1400,0 MHz. The insertion loss a e is defined as loss v alue determined at f N. Reference lev el for the relativ e attenuation arel of the TFS 1400 is the insertion loss ae. All specified data are met within the operating temperature range. D a t a typ. value tolerance / limit Insertion loss ae 2,4 dB max. 3,0 dB (reference level) Nominal frequency fN - 1400,0 MHz Passband PB - fN ± 20,0 MHz Pass band variation 1,3 dB max. 2,0 dB Relative attenuation arel 0,3 MHz ... 860 MHz 60 dB min. 55 dB 860 MHz ... 1100 MHz 52 dB min. 46 dB 1100 MHz ... 1308,1 MHz 46 dB min. 43 dB 1492,2 MHz ... 1608,4 MHz 45 dB min. 33 dB 1608,4 MHz ... 2000 MHz 45 dB min. 40 dB 2000 MHz ... 2250 MHz 43 dB min. 36 dB 2250 MHz ... 6000 MHz 29 dB min. 15 dB Group delay ripple 1381,2 MHz ... 1418,7 MHz 9 ns max. 15 ns Input VSWR within PB 2,1:1 max. 2,4 : 1 Output VSWR within PB 2,1:1 max. 2,4 : 1 CMRR * within PB 26 dB min. 20 dB Input power level - max. 10 dBm Permissible DC voltage - max. 0 V Operable temperature range - - 30 °C ... + 80 °C Operating temperature range OTR - - 20 °C ... + 50 °C Storage temperature range - - 50 °C ... +125 °C Temperature coefficient of frequency TCf -46 ppm/K *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. ) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) *) CMRR: Common Mode Rejection Ratio Generated: Checked / Approved: notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 1400.doc Version 1.4 09.06.2008 Vectron International Filter specification TFS 1400 2/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to ma ke changes to the product(s) and/or information contained herein without Filter characteristic -90 -80 -70 -60 -50 -40 -30 -20 -10 frequency in MHz magnitude in dB 1370 1376 1382 1388 1394 1400 1406 1412 1418 1424 1430-10 frequency in MHz magnitude in dB 1370 1376 1382 1388 1394 1400 1406 1412 1418 1424 14300.008 0.02 0.032 0.044 0.056 0.068 0.08 0.092 0.104 0.116 0.128 frequency in MHz delay in µs Construction and pin connection (All dimensions in mm) 1 2 3 456 1,2 Max. 0,6 0,1 0,75 3 ±0,15 0,6 1,5 6 4 Date code F00

• W24

1 Ground

2 Output

3 Ground

4 Input

5 Ground

6 Input

Date code: Year + week W 2008 X 2009 A 2010 ...

200 Ohm / 75 Ohm Test circuit

200Ω 75Ω L1 SAW 1, 3, 5 4 2 notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 1400.doc Version 1.4 09.06.2008 Vectron International Filter specification TFS 1400 3/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to ma ke changes to the product(s) and/or information contained herein without Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN MarkerTyp Date Code Ko t Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 A C N W 1 W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 The minimum bending radius is 45 mm. notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 1400.doc Version 1.4 09.06.2008 Vectron International Filter specification TFS 1400 4/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to ma ke changes to the product(s) and/or information contained herein without Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30°C to 217°C) less than 3°C/second > 100°C between 300 and 600 seconds > 150°C between 240 and 500 seconds > 217°C between 30 and 150 seconds Peak temperature max. 260°C Time within 5°C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50°C) less than 6°C/second Time from 30°C to Peak temperature no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C Time / s max. 300 s 10 ... 30 s 30 ... 150 s notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 1400.doc Version 1.4 09.06.2008 Vectron International Filter specification TFS 1400 5/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to ma ke changes to the product(s) and/or information contained herein without History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 19.06.2007 1.1 - Change and add data Strehl 17.07.2007 1.2 - Change insertion loss, passband, passband variation - Change attenuation and OTR S. Channaa 08.02.2008 1.3 - Change attenuation, group delay ripple and vswr - Add typical values and filter characteristic, generation of filter specification S. Channaa 06.05.2008 1.4 - Correct construction Strehl 09.06.2008 notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.