TFS125R

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfs 125r.doc Version 1.1 29.11.2011 Vectron International Filter specification TFS 125R 1/5 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement condition Ambient temperature: 23 ° C Input power level: 0 dBm Terminating impedance: * Input: 171 Ω || -13,5 pF Output: 137 Ω || -18,5 pF Characteristics Remark: The reference level for the relative attenuation a rel of the TFS125R is the minimum of the pass band att enuation. This value is defined as the insertion loss a e. The nominal frequency f N is fixed at 125 MHz without any tolerance. The values of relative attenuation a rel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operati ng temperature range is included in the production tolerance scheme. D a t a typ. value tolerance / limit Insertion loss ae 13,7 dB max. 16 dB (reference level) Nominal frequency fN 125 MHz Passband PB f N ± 15 MHz Pass band ripple 0,25 dB max. 1 dB Bandwidth 1 dB 35,5 MHz min. 30 MHz 25 dB 46,4 MHz max. 56 MHz Relative attenuation arel fN - 15 MHz … fN + 15 MHz 0,25 dB max. 1 dB fN - 100 MHz … fN - 40 MHz 49 dB min. 40 dB fN - 40 MHz … fN - 28 MHz 33 dB min. 25 dB fN + 28 MHz … fN + 40 MHz 33 dB min. 25 dB fN + 40 MHz … fN + 100 MHz 46 dB min. 40 dB Group delay ripple in PB GDR 15 ns max. 30 ns Return loss within PB 9 dB min. 6 dB Operating temperature range OTR - 40 ° C ... + 85° C Storage temperature range - 45 ° C ... + 85° C Temperature coefficient of frequency TC f * -98 ppm/K *) ∆ fc(Hz) = Tc f(ppm/K) x (T - To) x f CAT (MHz). Generated: Checked / Approved:

Filename: tfs 125r.doc Version 1.1 29.11.2011 Vectron International Filter specification TFS 125R 2/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of the ir use or application. No rights under any patent accompany the sale of any such product(s) or information. Filter characteristic Construction and pin connection (All dimensions in mm) 1,8 +/-0,2 1 7 ,0 +/-0,2 5 ,0 +/-0,2 2,54 2,54 0,6 1 3 Date code

50 Ohm Test circuit

1,2,3,5,7,8,9,11 6 R2 S 125R

• B49

1 Ground

2 Ground

3 Ground

4 Output

5 Ground

6 Output RF Return

7 Ground

8 Ground

9 Ground

10 Input

11 Ground

12 Input RF Return / Ground

Date code: Year + week B 2011 C 2012 D 2013 ... 50 100 150 200 -70 -60 -50 -40 -30 -20 -10 frequency in MHz magnitude in dB 105 110 115 120 125 130 135 140 145 -5 -4.5 -3.5 -2.5 -1.5 -0.5 frequency in MHz magnitude in dB 105 110 115 120 125 130 135 140 145 0.35 0.4 0.45 0.5 0.55 frequency in MHz delay in µs

Filename: tfs 125r.doc Version 1.1 29.11.2011 Vectron International Filter specification TFS 125R 3/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of the ir use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: -55 ° C to 125° C / 30 min. each / 1 0 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions refer to the attached " Air reflow temperature conditions" on page 4; 5. ESD MIL-STD-883E using coupling network of ISO 1 0605 and EN 6100-4-2 HBM:250V; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value f or N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN Marker Typ Date Code Ko t A C N W 1 W 2 The minimum bending radius is 45 mm. Tape (all dimensions in mm) Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 7,50 ± 0,1 G(min) : 0,75 P2 : 2,00 ± 0,1 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 5,40 ± 0,1 Bo : 7,60 ± 0,1 Ct : 13,3 ± 0,1 Reel (all dimensions in mm) A : 330 W1 : 16,4 +2/-0 W2(max) : 22,4 N(min) : 50 C : 13,0 +0,5/-0,2

Filename: tfs 125r.doc Version 1.1 29.11.2011 Vectron International Filter specification TFS 125R 4/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of the ir use or application. No rights under any patent accompany the sale of any such product(s) or information. Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30° C to 217° C) less than 3° C/ second > 100° C between 300 and 600 seconds > 150° C between 240 and 500 seconds > 217° C between 30 and 150 seconds Peak temperature max. 260° C Time within 5° C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50° C) less than 6° C/second Time from 30° C to Peak temperature no greater than 300 seconds Temperature / ° C Time / s max. 260° C 217° C 10 ... 30 s 30 ... 150 s max. 300 s Chip-mount air reflow profile

Filename: tfs 125r.doc Version 1.1 29.11.2011 Vectron International Filter specification TFS 125R 5/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of the ir use or application. No rights under any patent accompany the sale of any such product(s) or information. History Version Reason of Changes Name Date 1.0 - Generation of development specification Chilla 23.06.2010 1.1 - Created filter specification Chilla 29.11.2011 - Added terminating impedance - Added typical values - Added filter characteristic - Added test circuit