TFS115A

TFS115A VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfs 115a.doc Version 1.2 16.01.2006 VI TELEFILTER Filter specification TFS 115A 1/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedance: * Input: 130 Ω || -1,2 pF Output: 140 Ω || -3,1 pF Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 115 MHz without any tolerance or limit. The values of ab solute a ttenuation a abs are guar anteed for the w hole operating temperature range. The fr equency shift o f th e fil ter in the o perating temperature range is included in the production tolerance scheme. D a t a typ. value tolerance / limit Insertion loss ae 4,8 dB max. 6 dB Nominal frequency fN - 115 MHz Passband - fN ± 3 MHz Absolute attenuation aabs fN - 114 MHz … fN - 20 MHz 45 dB min. 40 dB fN - 20 MHz … fN - 7 MHz 35 dB min. 20 dB fN + 9 MHz … fN + 14 MHz 16 dB min. 14 dB fN + 14 MHz … fN + 24 MHz 28 dB min. 25 dB fN + 24 MHz … fN + 185 MHz 42 dB min. 40 dB Input power level - max. 20 dBm Operating temperature range OTR - - 40 °C ... + 85 °C Storage temperature range - - 40 °C ... + 85 °C Temperature coefficient of frequency TCf ** -78 ppm/K - *) The terminating impedances and insertion loss depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) ∆fc(Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz) Generated: Checked / Approved: VI TELEFILTER reserves the right to make chang es to the produc t(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 115a.doc Version 1.2 16.01.2006 VI TELEFILTER Filter specification TFS 115A 2/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Filter characteristic 50 100 150 200 250 300 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 frequency in MHz magnitude in dB 108 110 112 114 116 118 120 122 -10 frequency in MHz magnitude in dB Construction and pin connection (All dimensions in mm) 7 5 1 3 1,8 Max. 2,54 0,1 1,1 1,1 120° 0,64 5 -0 ,10 +0,15 1 3 Date code Date code: Year + week U 2006 V 2007 W 2008 ...

1 Ground

2 Output

3 Ground

4 Ground

5 Ground

6 Input

7 Ground

8 Ground

• U03 50 Ω Test circuit SAW 1, 3, 4, 5, 7, 8 2 6 VI TELEFILTER reserves the right to make chang es to the produc t(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 115a.doc Version 1.2 16.01.2006 VI TELEFILTER Filter specification TFS 115A 3/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN MarkerTyp Date Code Ko t Tape (all dimensions in mm) W : 12,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 5,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 5,30 ± 0,1 Bo : 5,30 ± 0,1 Ct : 9,5 ± 0,1 A C N W 1 W 2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 +0,5/-0,2 The minimum bending radius is 45 mm. VI TELEFILTER reserves the right to make chang es to the produc t(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 115a.doc Version 1.2 16.01.2006 VI TELEFILTER Filter specification TFS 115A 4/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30°C to 217°C) less than 3°C/second > 100°C between 300 and 600 seconds > 150°C between 240 and 500 seconds > 217°C between 30 and 150 seconds Peak temperature max. 260°C Time within 5°C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50°C) less than 6°C/second Time from 30°C to Peak temperature no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C Time / s max. 300 s 10 ... 30 s 30 ... 150 s VI TELEFILTER reserves the right to make chang es to the produc t(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 115a.doc Version 1.2 16.01.2006 VI TELEFILTER Filter specification TFS 115A 5/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com History Version Reason of Changes Name Date 1.0 - generation of development specification Pfeiffer 14.05.2003 1.1 - generation of filter specification Martens 26.11.2004 1.2 - change terminating impedance and stability characteristics Strehl 16.01.2006 VI TELEFILTER reserves the right to make chang es to the produc t(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.