TFS1068A

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfs 1068a.doc Version 3.0 18.03.2011 Vectron International Filter specification TFS 1068A 1/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1068 MHz without any tolerance or limit. The values of ab solute a ttenuation a abs are guar anteed for the w hole operating temperature range. The fr equency shift o f th e fil ter in the o perating temperature range is included in the production tolerance scheme. D a t a typ. value tolerance / limit Insertion loss ae 3,1 dB max. 3,5 dB Nominal frequency fN - 1068,0 MHz Passband PB - fN ± 17,5 MHz Pass band ripple 0,7 dB max. 1,0 dB Bandwidth BW 1,0 dB 53 MHz min. 35 MHz Absolute attenuation aabs 0,3 MHz … 800 MHz 46 dB min. 40 dB 800 MHz … 915 MHz 42 dB min. 20 dB 1220 MHz … 1270 MHz 45 dB min. 20 dB 1270 MHz … 2000 MHz 36 dB min. 30 dB VSWR 1,3 : 1 max. 2 : 1 Input power level - max. 10 dBm Operating temperature range OTR - - 40 °C ... + 85 °C Storage temperature range - - 40 °C ... + 85 °C Temperature coefficient of frequency TCf * -73 ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / Approved: notice. No liability is assumed as a result of their use or application. No rights under an y p atent accompany the sale of any such product(s) or information.

Filename: tfs 1068a.doc Version 3.0 18.03.2011 Vectron International Filter specification TFS 1068A 2/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without Filter characteristic 1028 1036 1044 1052 1060 1068 1076 1084 1092 1100 1108-10 frequency in MHz m a g n itude i n dB 1028 1036 1044 1052 1060 1068 1076 1084 1092 1100 11081 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 frequency in MHz VSW R 68 268 468 668 868 1068 1268 1468 1668 1868 2068-80 -70 -60 -50 -40 -30 -20 -10 frequency in MHz ma gn itud e in dB Construction and pin connection (All dimensions in mm) Date code: Year + week B 2011 C 2012 D 2013 ...

1 Ground

2 Input

3 Ground

4 Ground

5 Output

6 Ground

1,2 Max. 0,6 0,75 3,0 +/-0,15 0,6 0,30X0,30 6 4 Date code A68A

• B11 50 Ω Test circuit SAW 1, 3, 4, 6 5 2 notice. No liability is assumed as a result of their use or application. No rights under an y p atent accompany the sale of any such product(s) or information.

Filename: tfs 1068a.doc Version 3.0 18.03.2011 Vectron International Filter specification TFS 1068A 3/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN Marker TypDate CodeKo t Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 A C N W 1 W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 + 1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 The minimum bending radius is 45 mm. notice. No liability is assumed as a result of their use or application. No rights under an y p atent accompany the sale of any such product(s) or information.

Filename: tfs 1068a.doc Version 3.0 18.03.2011 Vectron International Filter specification TFS 1068A 4/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30°C to 217°C) less than 3°C/second > 100°C between 300 and 600 seconds > 150°C between 240 and 500 seconds > 217°C between 30 and 150 seconds Peak temperature max. 260°C Time within 5°C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50°C) less than 6°C/second Time from 30°C to Peak temperature no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C Time / s max. 300 s 10 ... 30 s 30 ... 150 s notice. No liability is assumed as a result of their use or application. No rights under an y p atent accompany the sale of any such product(s) or information.

Filename: tfs 1068a.doc Version 3.0 18.03.2011 Vectron International Filter specification TFS 1068A 5/5 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@vectron.com Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 16.05.2007 1.1 - Change construction Strehl 18.06.2007 1.2 - Change limit for insertion loss Noack 19.07.2007 1.3 - Change input power level Strehl 27.08.2007 1.4 - Add typ. value and filter characteristic Strehl 26.05.2008 - Generation of filter specification 1.5 - Change absolute attenuation Strehl 02.12.2008 2.0 - tape & reel direction updated Noack 21.10.2009 3.0 - tape & reel direction updated Noack 18.03.2011 notice. No liability is assumed as a result of their use or application. No rights under an y p atent accompany the sale of any such product(s) or information.