TFR622A

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfr 622a.doc Version 1.3 30.03.2007 VI TELEFILTER SAW Resonator Specification TFR 622A 1/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Measurement condition Ambient temperature: 25 °C Input power level: 0 dBm Terminating impedance: Input: 50 Ω || 0 pF Output: 50 Ω || 0 pF Characteristics Remark: The minimum of the attenuation a min is defined as the insertion loss ae. The centre frequency fR is the measured frequency at the minimum insertion loss point. The frequency shift of the filter in the operating temperature range is not included in the production tolerance scheme. D a t a typ. value tolerance / limit Insertion loss ae = amin 1,5 dB max. 3 dB (reference level) Centre frequency fR 622,338 ± 0,075 MHz Quality factor Unloaded Q 7700 min. 7000 Parallel capacitance C0* 2,16 pF - Motional resistance Rm* 21 Ω - Motional inductance Lm* 47,7 µH - Motional capacitance Cm* 1,37 fF - Operating temperature range OTR - -30 °C ... + 85°C Storage temperature range - -40 °C ... + 90°C Turnover temperature T0 32 °C - Temperature coefficient of frequency TCf ** -0,044 ppm/K *) The equivalent circuit model is for reference only. **) ∆fc(Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz) Generated: Checked / Approved: VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein w ithout notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfr 622a.doc Version 1.3 30.03.2007 VI TELEFILTER SAW Resonator Specification TFR 622A 2/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Filter characteristic -14 -12 -10 frequency in MHz magnitude in dB 0.006 0.012 0.018 0.024 0.03 0.036 0.042 0.048 0.054 0.06 frequency conductance in S Construction and pin connection (All dimensions in mm) 1 2 3 456 1,2 Max. 0,6 0,75 3,0 +/-0,15 0,6 0,30X0,30 6 4 Date code Date code: Year + week V 2007 W 2008 X 2009 ...

1 Ground

2 Input

3 Ground

4 Ground

5 Input RF Return* / Output**

6 Ground

• For oneport operation ** For twoport operation 622A R V14 50 Ω test circuit and equivelent circuit 2 6 2 6 Cm Lm Rm VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein w ithout notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfr 622a.doc Version 1.3 30.03.2007 VI TELEFILTER SAW Resonator Specification TFR 622A 3/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN MarkerTyp Date Code Ko t Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 A C N W 1 W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 The minimum bending radius is 45 mm. VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein w ithout notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfr 622a.doc Version 1.3 30.03.2007 VI TELEFILTER SAW Resonator Specification TFR 622A 4/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30°C to 217°C) less than 3°C/second > 100°C between 300 and 600 seconds > 150°C between 240 and 500 seconds > 217°C between 30 and 150 seconds Peak temperature max. 260°C Time within 5°C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50°C) less than 6°C/second Time from 30°C to Peak temperature no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C Time / s max. 300 s 10 ... 30 s 30 ... 150 s VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein w ithout notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfr 622a.doc Version 1.3 30.03.2007 VI TELEFILTER SAW Resonator Specification TFR 622A 5/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com History Version Reason of changes Name Date 1.0 - Generate development specification Dr. Wall 07.12.2004 1.1 - Add typical values, change turnover temperature, reduce quality factor limit Martens 24.08.2005 1.2 - Change frequency from 622,08 MHz to 622,301 MHz Dr. Wall 10.07.2006 1.3 - Adjust typical values Dr. Wall 30.03.2007 - Add resonator characteristic - Correct centre frequency to 622,338 MHz - Add RoHs information - Define pinning more precisely VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein w ithout notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.