TFR125 VECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Filename: tfr 125.doc Version 1.1 28.06.2005 VI TELEFILTER Resonator Specification TFR 125 1/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement condition Ambient temperature: 25 °C Input power level: 0 dBm Terminating impedance: Input: 50 Ω || 0 pF Output: 50 Ω || 0 pF Characteristics Remark: The minimum of the attenuation a min is defined as the insertion loss a e. The centre frequency f c is the measured frequency at the minimum insertion loss point. The frequency shift of the resonator in the operating temperature range is not included in the production tolerance scheme. D a t a typ. value tolerance / limit Insertion loss ae = amin 2,4 dB max. 3,0 dB (reference level) Resonant frequency at ambient temperature fC - 125 ± 0,05 MHz Quality factor Q Unloaded 13600 min. 8000 Parallel capacitance * C0 5,4 pF - Motional resistance * Rm 34 Ω - Motional inductance * Lm 620 µH - Motional capacitance * Cm 2,6 fF - Operating temperature range OTR - -20 °C ... + 70°C Storage temperature range - -30 °C ... + 150°C Frequency inversion temperature T 0 13 °C - Temperature coefficient of frequency TC f ** -0,038 ppm/K *) The equivalent circuit model is for reference only. **) ∆fc(Hz) = Tcf(ppm/K2) x (T – T0) 2 x fCAT (MHz) Generated: Checked / Approved:
Filename: tfr 125.doc Version 1.1 28.06.2005 VI TELEFILTER Resonator Specification TFR 125 2/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Resonator characteristic Construction and pin connection (All dimensions in mm) 50 Ω test circuit and equivelent circuit 2 6 2 6 Cm Lm Rm R 125
- T26
1 Ground
2 Output
3 Ground
4 Ground
5 Ground
6 Ground
7 Ground
8 Input
9 Ground
10 Ground
11 Ground
12 Ground
Date code: Year + week T 2005 U 2006 V 2007 ...
Filename: tfr 125.doc Version 1.1 28.06.2005 VI TELEFILTER Resonator Specification TFR 125 3/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respecti vely, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions refer to the attac hed "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm G Do W Ct F E G Po Bo Ao Pull Off Direction PIN MarkerTyp Date Code Ko t A C N W 1 W 2 The minimum bending radius is 45 mm. Tape (all dimensions in mm) W : 16,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 7,50 ± 0,1 G(min) : 0,60 P2 : 2,00 ± 0,1 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 5,50 ± 0,1 Bo : 7,50 ± 0,1 Ct : 13,5 ± 0,1 Reel (all dimensions in mm) A : 330 W1 : 16,4 +2/-0 W2(max) : 22,4 N(min) : 50 C : 13,0 +0,5/-0,2
Filename: tfr 125.doc Version 1.1 28.06.2005 VI TELEFILTER Resonator Specification TFR 125 4/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30°C to 217°C) less than 3°C/second > 100°C between 300 and 600 seconds > 150°C between 240 and 500 seconds > 217°C between 30 and 150 seconds Peak temperature max. 260°C Time within 5°C of actual peak temperature between 10 and 30 seconds Cool-down rate (Peak to 50°C) less than 6°C/second Time from 30°C to Peak temperature no greater than 300 seconds Temperature / °C Time / s max. 260°C 217°C 10 ... 30 s 30 ... 150 s max. 300 s Chip-mount air reflow profile
Filename: tfr 125.doc Version 1.1 28.06.2005 VI TELEFILTER Resonator Specification TFR 125 5/5 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the produc t(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. History Version Reason of changes Name Date 1.0 - Generation of resonator specification Martens 27.06.2005 1.1 - Changed temperature coefficient and frequency inversion temperature Martens 28.06.2005