TFH70D

TFH70D VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

File name: TFH70D.doc Version 1.0 09.03.2001 VI TELEFILTER Filter Specification TFH 70D VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18

267 Lowell Road

Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 1. Measurement condition : Ambient temperature TA: 23 °C Input power level: 0 dBm. Terminating impedances at fc: for input: 1088 Ω  - 7,20 pF. for output: Q-value of matching elements: > 50 2. Characteristics : Remark: The insertion loss ae is defined as the insertion loss at the nominal frequency fN . Reference level for the relative attenuation arel of the TFH 70D is the insertion loss. The reference frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tcf is valid both for the centre frequency fc and the frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value tolerance / limit Insertion loss (Reference level) ae dB max. dB Nominal frequency fN MHz Centre frequency fc at ambient temperature TA (fCAT) 70,01 MHz 70,0 ± 0,09 MHz Pass band at ambient temperature TA: ( PB ) fN .... fN ± 1,5 MHz Amplitude ripple in O.T.R. (p-p) in : fN ... fN ± 1,4 MHz 0,5 dB max. 0,8 dB Bandwidth in O.T.R. : 0,8 dB - band width 3,19 MHz min. 2,8 MHz dB - band width 3,22 MHz min. 3,0 MHz dB - band width 3,61 MHz min. 3,5 MHz dB - band width 4,66 MHz dB - band width 5,21 MHz max. 5,6 MHz dB - band width 5,31 MHz Relative attenuation arel 1,4 MHz 0,5 dB max. 0,8 dB fN ± 1,4 MHz ... fN ± 1,5 MHz 0,7 dB max. dB fN ± 1,5 MHz ... fN ± 1,75 MHz 2,5 dB max. dB fN ± 2,8 MHz ... fN ± 5,0 MHz 44...53 dB min. dB fN ± 5,0 MHz ... fN ± MHz 53...65 dB min. dB fN - 65 MHz ... fN - MHz 75...65 dB fN + 35 MHz ... fN + MHz 42...45 dB fN + 63 MHz ... fN + 200 MHz 65...70 dB Group delay ( mean value in PB ): 2,76 µs Group delay ripple in PB (p-p): ns max. 100 ns Deviation from linear phase in PB band (p-p): 2,6° (r.m.s. 0,6°) max. (S11) / (S22) in PB : dB Triple transit attenuation compared to main signal dB Crosstalk dB Frequency inversion temperature ( To ) ° C Temperature coefficient of frequency ( Tcf ) -0,045 ppm/K² Frequency deviation of fC over temperature: * ) ∆fc(Hz) = Tcf(ppm/K) x (T - To)² x fTo (MHz) Operating temperature range ( O.T.R. ) 0 °C ... + 70 °C Storage temperature range -40 °C ... + 85 °C * ) fTo is reference frequency fc at frequency inversion temperature (To ) Generated: Dunzow W.P. Checked/Approved: Dr. Bert Wall

File name: TFH70D.doc Version 1.0 09.03.2001 VI TELEFILTER Filter Specification TFH 70D VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 3. Package : 4. 50 ΩΩΩΩ matching network : ( see Application Note of TFH 70D ) 1.02

2.62 Max

1.02 2.31 4.83 x 3.53 1.91 24.64 9.00 TFH 70D N07 Datecode: Year+week L 1999 M 2000 N 2001 Pin 10 Input Pin 1 Input RF Return Pin 5 Output Pin 6 Output RF Return Pin 2-4, 7-9 Package Ground 50 ΩΩΩΩ 50 ΩΩΩΩ Scheme 1

File name: TFH70D.doc Version 1.0 09.03.2001 VI TELEFILTER Filter Specification TFH 70D VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 5. Stability characteristics : After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration:

10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;

1. Damp heat: 25 °C to 55°C / 95% r.H. / 10 cycles (cycle) DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; 6. Packing : Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 1000 reel of empty components at start: min 300 mm reel of empty components at start including leader: min 500 mm trailer min 300 mm Reel (all dimensions in mm): A 330 W2 (max) N (min) 100 C 13 ± 0,2 Tape (all dimensions in mm) W ± 0,3 Po ± 0,1 Do 1,5 + 0,1 E 1,75 ± 0,1 F 20,25 ± 0,05 G (min) : 0,75 ± 0,05 ± 0,1 D1(min) : 2,0 Ao 9,3 ± 0,1 Bo 24,9 ± 0,1 CT ± 0,2 E EMBOSSED CARRIER TAPE COVER TAPE G CT Bo Ao W F N A C

File name: TFH70D.doc Version 1.0 09.03.2001 VI TELEFILTER Filter Specification TFH 70D VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 7. Air reflow temperature conditions : 1st and 2nd air reflow profile Name: pre-heating periods main-heating periods peak temperature Temperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °C Time: 60 sec. - 90 sec. 20 sec. - 25 sec. Air reflow profile 100 120 140 160 180 200 220 240 260 100 120 140 160 180 200 220 240 time / sec. temperature / °C Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 140 160 150 161 160 164 170 170 180 180 103 190 205 121 195 230 134 200 255 143 205 230 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120

File name: TFH70D.doc Version 1.0 09.03.2001 VI TELEFILTER Filter Specification TFH 70D VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 8. History : Version Reason of changes Name Date 1.0 Generate extended filter specification. Dunzow W. 09.03.2001